越南橡胶3l检测标准
CNAS认证
CMA认证
BS 3L 500:2011+A1:2017
Procedure for inspection, testing and acceptance of wrought magnesium base alloys
Procedure for inspection, testing and acceptance of wrought magnesium base alloys
- 【发布单位或类别】 GB-BSI英国标准学会
- 【发布日期】2017-09-28
- 【CCS分类】
- 【ICS分类】
BS 3L 500:2011+A1:2017
RIBBON ATTACHMENT, LETTER \
RIBBON ATTACHMENT, LETTER \
- 【发布单位或类别】 US-MIL美国军事规范和标准
- 【发布日期】2020-01-13
- 【CCS分类】
- 【ICS分类】
BS 3L 500:2011+A1:2017
Switches, Push, 10 Amperes or Low Level, Dusttight
Switches, Push, 10 Amperes or Low Level, Dusttight
- 【发布单位或类别】 US-MIL美国军事规范和标准
- 【发布日期】2009-03-23
- 【CCS分类】
- 【ICS分类】
BS 3L 500:2011+A1:2017
Specification for sheet and strip of aluminium-2¼% magnesium alloy (temper designation-O)
Specification for sheet and strip of aluminium-2¼% magnesium alloy (temper designation-O)
- 【发布单位或类别】 GB-BSI英国标准学会
- 【发布日期】1985-12-31
- 【CCS分类】
- 【ICS分类】
BS 3L 500:2011+A1:2017
Specification for sheet and strip of aluminium-2¼% magnesium alloy (temper designation H16 or H26)
Specification for sheet and strip of aluminium-2¼% magnesium alloy (temper designation H16 or H26)
- 【发布单位或类别】 GB-BSI英国标准学会
- 【发布日期】1985-12-31
- 【CCS分类】
- 【ICS分类】
BS 3L 500:2011+A1:2017
Procedure for inspection, testing and acceptance of wrought magnesium base alloys
Procedure for inspection, testing and acceptance of wrought magnesium base alloys
- 【发布单位或类别】 GB-BSI英国标准学会
- 【发布日期】2011-12-31
- 【CCS分类】
- 【ICS分类】
BS 3L 500:2011+A1:2017
Switches, Push, 10 Amperes or Low Level, Dusttight
Switches, Push, 10 Amperes or Low Level, Dusttight
- 【发布单位或类别】 US-MIL美国军事规范和标准
- 【发布日期】2017-05-23
- 【CCS分类】
- 【ICS分类】
BS 3L 500:2011+A1:2017
Switches, Push, 10 Amperes or Low Level, Dusttight
Switches, Push, 10 Amperes or Low Level, Dusttight
- 【发布单位或类别】 US-MIL美国军事规范和标准
- 【发布日期】2014-03-27
- 【CCS分类】
- 【ICS分类】
BS 3L 500:2011+A1:2017
RESISTORS, VARIBLE, COMPOSITION, SYTLE RV6 (SUPERSEDING MIL-PRF-94/3K)(S/S BY MIL-PRF-94/3M)
RESISTORS, VARIBLE, COMPOSITION, SYTLE RV6 (SUPERSEDING MIL-PRF-94/3K)(S/S BY MIL-PRF-94/3M)
- 【发布单位或类别】 US-MIL美国军事规范和标准
- 【发布日期】2001-02-16
- 【CCS分类】
- 【ICS分类】
BS 3L 500:2011+A1:2017
Specification for wire for solid, cold-forged rivets of aluminium-copper-magnesium alloy (not exceeding 10 mm diameter) (Cu 2.5, Mg 0.3)
Specification for wire for solid, cold-forged rivets of aluminium-copper-magnesium alloy (not exceeding 10 mm diameter) (Cu 2.5, Mg 0.3)
- 【发布单位或类别】 GB-BSI英国标准学会
- 【发布日期】1971-08-31
- 【CCS分类】
- 【ICS分类】
BS 3L 500:2011+A1:2017
Specification for tube of aluminium-copper-mangesium-silicon-manganese alloy (solution treated and precipitation treated) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8)
Specification for tube of aluminium-copper-mangesium-silicon-manganese alloy (solution treated and precipitation treated) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8)
- 【发布单位或类别】 GB-BSI英国标准学会
- 【发布日期】1971-08-31
- 【CCS分类】
- 【ICS分类】
BS 3L 500:2011+A1:2017
Specification for wire for solid, cold-forged rivets of aluminium-5% magnesium alloy (not exceeding 10 mm diameter)
Specification for wire for solid, cold-forged rivets of aluminium-5% magnesium alloy (not exceeding 10 mm diameter)
- 【发布单位或类别】 GB-BSI英国标准学会
- 【发布日期】1971-08-31
- 【CCS分类】
- 【ICS分类】
BS 3L 500:2011+A1:2017
RESISTORS, VARIABLE, WIRE-WOUND (LEAD-SCREW ACTUATED), NONESTABLISHED RELIABILITY AND ESTABLISHED RELIABILITY STYLE RTR24 (SUPERSEDING MIL-R-39015/3K)(S/S BY MIL-PRF-39015/3M)
RESISTORS, VARIABLE, WIRE-WOUND (LEAD-SCREW ACTUATED), NONESTABLISHED RELIABILITY AND ESTABLISHED RELIABILITY STYLE RTR24 (SUPERSEDING MIL-R-39015/3K)(S/S BY MIL-PRF-39015/3M)
- 【发布单位或类别】 US-MIL美国军事规范和标准
- 【发布日期】1997-05-19
- 【CCS分类】
- 【ICS分类】
BS 3L 500:2011+A1:2017
Specification for ingots and castings of magnesium-8% aluminium-zinc-manganese alloy (solution treated) (Al 8, Zn 0.5, Mn 0.3)
Specification for ingots and castings of magnesium-8% aluminium-zinc-manganese alloy (solution treated) (Al 8, Zn 0.5, Mn 0.3)
- 【发布单位或类别】 GB-BSI英国标准学会
- 【发布日期】1970-03-26
- 【CCS分类】
- 【ICS分类】
BS 3L 500:2011+A1:2017
Specification for ingots and castings of aluminium-silicon-copper-magnesium alloy (solution treated and precipitation treated) (Si 5, Cu 1.2, Mg 0.5)
Specification for ingots and castings of aluminium-silicon-copper-magnesium alloy (solution treated and precipitation treated) (Si 5, Cu 1.2, Mg 0.5)
- 【发布单位或类别】 GB-BSI英国标准学会
- 【发布日期】1970-03-26
- 【CCS分类】
- 【ICS分类】
BS 3L 500:2011+A1:2017
Specification for ingots and castings of magnesium - 10% aluminium-zinc-manganese alloy (solution treated) (Al 10, Zn 0.5, Mn 0.3)
Specification for ingots and castings of magnesium - 10% aluminium-zinc-manganese alloy (solution treated) (Al 10, Zn 0.5, Mn 0.3)
- 【发布单位或类别】 GB-BSI英国标准学会
- 【发布日期】1970-03-26
- 【CCS分类】
- 【ICS分类】
BS 3L 500:2011+A1:2017
Specification for ingots and castings of aluminium-silicon-copper-iron-nickel-magnesium alloy (precipitation treated) (Si 2.5, Cu 1.2, Fe 1, Ni 1, Mg 0.1)
Specification for ingots and castings of aluminium-silicon-copper-iron-nickel-magnesium alloy (precipitation treated) (Si 2.5, Cu 1.2, Fe 1, Ni 1, Mg 0.1)
- 【发布单位或类别】 GB-BSI英国标准学会
- 【发布日期】1970-03-26
- 【CCS分类】
- 【ICS分类】
BS 3L 500:2011+A1:2017
Specification for ingots and castings of magnesium - 10% aluminium-zinc-manganese alloy (solution treated and precipitation treated) (Al 10, Zn 0.5, Mn 0.3)
Specification for ingots and castings of magnesium - 10% aluminium-zinc-manganese alloy (solution treated and precipitation treated) (Al 10, Zn 0.5, Mn 0.3)
- 【发布单位或类别】 GB-BSI英国标准学会
- 【发布日期】1970-03-26
- 【CCS分类】
- 【ICS分类】
BS 3L 500:2011+A1:2017
V/V PHÊ DUYỆT QUY HOẠCH CHI TIẾT TỶ LỆ 1/500 KHU DÂN DỤNG PHÍA NAM VEN SÔNG CẦN THƠ, THÀNH PHỐ CẦN THƠ
- 【发布单位或类别】 VN-LEX越南技术法规
- 【发布日期】2002-12-30
- 【CCS分类】
- 【ICS分类】
BS 3L 500:2011+A1:2017
Về chính sách hỗ trợ đầu tư phát triển Chăn nuôi - Thú y
- 【发布单位或类别】 VN-LEX越南技术法规
- 【发布日期】2002-12-31
- 【CCS分类】
- 【ICS分类】
