QB/T 4235-2011
GB 28366-2012
GB 28367-2012
GB/T 37641-2019
Determination of 2,3,5,4'-tetrahydroxystilbene-O-β-D-glucoside in cosmetics―High performance liquid chromatography
GB 28365-2012
AWWA WQTC64107
Treatment of 1,4-Dioxane in Groundwater Using Advanced Oxidation Processes: UV/H2O2, O3/H2O2, and UV/TiO2
AWWA WQTC55067
Quantifying Hydroxyl Radical Exposure: A Tool for Assessing Advanced Oxidation Process (O3-H2O2) Destruction of MTBE
USP f101304
4-Hydroxy-2,5-dimethyl-3(2H)-furanone
USP f101242
5-Ethyl 3-Hydroxy 4-Methyl 2(5H)-Furanone
UNE 84692:2006
Cosmetic raw materials. Sunscreens. (1,3,5)-triazine-2,4-bis{(4-(2-ethyl-hexyloxy)-2-hydroxy)-phenyl}-6-(4-methoxyphenyl) and 2,2-methylene-bis-6-(2H-benzotriazol-2-yl)-4-(tetramethyl-butyl)-1,1,3,3-phenol. Determination by liquid chromatography.
PH-97-03-2
A Generalized Component Design Model by Combined Heat and Mass Transfer Analysis in NH3-H2O Absorption Heat Pump Systems
DIN 54387-2
Testing of ceramic raw and basic materials - Chemical analysis of boron carbide, boron nitride, metal borides and elemental boron - Part 2: Determination of total boron, soluble boron compounds, HNO<(Index)3>-soluble boron in B<(Index)4>C, H<(Index)2>O<(Index)2> soluble and insoluble fractions in amorphous boron and HF/HNO<(Index)3> insoluble fractions in titanium boride
MIL MIL-M-24784 Notice 1-Cancellation
MANUALS, TECHNICAL: GENERAL ACQUISITION AND DEVELOPMENT REQUIREMENTS (S/S BY MIL-DTL-24784A) (SUPERSEDING DOD-STD-2139, WS-10759/1/2/3, MIL-M-15071H, MIL-O-24312B, MIL-M-24570, MIL-M-24571, MIL-T-24747)
MIL MIL-M-24784
MANUALS, TECHNICAL: GENERAL ACQUISITION AND DEVELOPMENT REQUIREMENTS (S/S BY MIL-DTL-24784A) (SUPERSEDING DOD-STD-2139, WS-10759/1/2/3, MIL-M-15071H, MIL-O-24312B, MIL-M-24570, MIL-M-24571, MIL-T-24747)
MIL MIL-M-24784 Supplement 1
MANUALS, TECHNICAL: GENERAL ACQUISITION AND DEVELOPMENT REQUIREMENTS (S/S BY MIL-DTL-24784A) (SUPERSEDING DOD-STD-2139, WS-10759/1/2/3, MIL-M-15071H, MIL-O-24312B, MIL-M-24570, MIL-M-24571, MIL-T-24747)
UNE 60402-2:2008
Gaseous fuels. Pressure regulator with an inlet MOP up to 0,4 bar and an oulet MOP up to 0,05 bar. Part 2: Regulator with a MOP greater than 150 mbar, with an incorporated minimum low pressure cut-off safety valve, with a maximum pressure safety valve and an equivalent flow rate up to 4,8 m3 (n)/h o
32021R1532
DIN 54387-2-DRAFT
Draft Document - Testing of ceramic raw and basic materials - Chemical analysis of boron carbide, boron nitride, other metal borides and elemental boron - Part 2: Determination of total boron, soluble boron compounds, HNO<(Index)3>-soluble boron in B<(Index)4>C, H<(Index)2>O<(Index)2> soluble and insoluble fractions in amorphous boron and HF/HNO<(Index)3> insoluble fractions in titanium boride