碳含量越高钢硬度检测标准，碳含量越高钢硬度检测标准标准内容,检测中心-北检（北京）检测技术研究院

GB/T 15247-2008

微束分析电子探针显微分析测定钢中碳含量的校正曲线法
Microbeam analysis - Electron probe microanalysis - Guidelines for determining the carbon content of steels using calibration curve method

【发布单位或类别】 CN-GB国家标准
【发布日期】2008-08-20
【CCS分类】N33电子光学与其他物理光学仪器
【ICS分类】17.180.30光学测量仪器

KS D ISO 437-2021

강 및 주철 — 총 탄소 함유량의 정량 —연소 무게분석법
Steel and cast iron — Determination of total carbon content —Combustion gravimetric method

【发布单位或类别】 KR-KS韩国标准
【发布日期】2021-11-25
【CCS分类】
【ICS分类】77.080.01黑色金属综合

KS D ISO 437-2001(2016)

철 및 강－탄소의 총량 분석－연소 무게법
Steel and cast iron－Determination of total carbon content－Combustion gravimetric method

【发布单位或类别】 KR-KS韩国标准
【发布日期】2001-12-06
【CCS分类】
【ICS分类】77.080.01黑色金属综合

KS D ISO 16592-2011(2016)

마이크로빔 분석－전자 탐침 미소분석－검정곡선을 이용한 강재의 탄소 함량 정량 지침
Microbeam analysis－Electron probe microanalysis－Guidelines for determining the carbon content of steels using a calibration curve method

【发布单位或类别】 KR-KS韩国标准
【发布日期】2011-11-28
【CCS分类】
【ICS分类】71.040.50物理化学分析方法

KS D ISO 16592-2011(2021)

마이크로빔 분석－전자 탐침 미소분석－검정곡선을 이용한 강재의 탄소 함량 정량 지침
Microbeam analysis－Electron probe microanalysis－Guidelines for determining the carbon content of steels using a calibration curve method

【发布单位或类别】 KR-KS韩国标准
【发布日期】2011-11-28
【CCS分类】
【ICS分类】71.040.50物理化学分析方法

BS ISO 16592:2012

Microbeam analysis. Electron probe microanalysis. Guidelines for determining the carbon content of steels using a calibration curve method
Microbeam analysis. Electron probe microanalysis. Guidelines for determining the carbon content of steels using a calibration curve method

【发布单位或类别】 GB-BSI英国标准学会
【发布日期】2012-08-31
【CCS分类】
【ICS分类】物理化学分析方法

ISO 16592:2012

Microbeam analysis — Electron probe microanalysis — Guidelines for determining the carbon content of steels using a calibration curve method
Microbeam analysis — Electron probe microanalysis — Guidelines for determining the carbon content of steels using a calibration curve method

【发布单位或类别】 IX-ISO国际标准化组织
【发布日期】2012-07-31
【CCS分类】
【ICS分类】71.040.50钢

SAE AMS5062J

Steel, Low Carbon Bars, Forgings, Tubing, Sheet, Strip, and Plate 0.25 Carbon, Maximum (Stabilized: Aug 2017)
Steel, Low Carbon Bars, Forgings, Tubing, Sheet, Strip, and Plate 0.25 Carbon, Maximum (Stabilized: Aug 2017)

【发布单位或类别】 US-SAE美国机动车工程师协会
【发布日期】2017-08-14
【CCS分类】
【ICS分类】金属材料化学分析

UNE 7331:1975

DETERMINATION OF LOW CARBON CONTENTS IN STEELS. VOLUMETRIE METOD.
DETERMINATION OF LOW CARBON CONTENTS IN STEELS. VOLUMETRIE METOD.

【发布单位或类别】 ES-UNE西班牙标准
【发布日期】1975-06-15
【CCS分类】
【ICS分类】金属材料化学分析

UNE 7349:1976

DETERMINATION OF CAST IRON AND STEEL CARBON CONTENT. GASOMETRIC METHOD.
DETERMINATION OF CAST IRON AND STEEL CARBON CONTENT. GASOMETRIC METHOD.

【发布单位或类别】 ES-UNE西班牙标准
【发布日期】1976-05-15
【CCS分类】
【ICS分类】金属材料化学分析

KS D ISO 4830-4-2005(2010)

강－저농도 탄소 정량 방법－제4부：연소 후 전기량법
Steel－Determination of low carbon contents－Part 4：Coulometric method after combustion

【发布单位或类别】 KR-KS韩国标准
【发布日期】2005-11-08
【CCS分类】
【ICS分类】77.080.20黑色金属综合

SAE AMS5062H

Steel, Low Carbon Bars, Forgings, Tubing, Sheet, Strip, and Plate 0.25 Carbon, Maximum
Steel, Low Carbon Bars, Forgings, Tubing, Sheet, Strip, and Plate 0.25 Carbon, Maximum

【发布单位或类别】 US-SAE美国机动车工程师协会
【发布日期】2013-09-20
【CCS分类】
【ICS分类】物理化学分析方法

ASTM E1019-03

Standard Test Methods for Determination of Carbon, Sulfur, Nitrogen, and Oxygen in Steel and in Iron, Nickel, and Cobalt Alloys
Standard Test Methods for Determination of Carbon, Sulfur, Nitrogen, and Oxygen in Steel and in Iron, Nickel, and Cobalt Alloys

【发布单位或类别】 US-ASTM美国材料与试验协会
【发布日期】2003-10-01
【CCS分类】
【ICS分类】77.040.30钢

ASTM E1019-02

Standard Test Methods for Determination of Carbon, Sulfur, Nitrogen, and Oxygen in Steel and in Iron, Nickel, and Cobalt Alloys
Standard Test Methods for Determination of Carbon, Sulfur, Nitrogen, and Oxygen in Steel and in Iron, Nickel, and Cobalt Alloys

【发布单位或类别】 US-ASTM美国材料与试验协会
【发布日期】2002-10-10
【CCS分类】
【ICS分类】77.040.30黑色金属综合

ASTM E1019-00

Standard Test Methods for Determination of Carbon, Sulfur, Nitrogen, and Oxygen in Steel and in Iron, Nickel, and Cobalt Alloys
Standard Test Methods for Determination of Carbon, Sulfur, Nitrogen, and Oxygen in Steel and in Iron, Nickel, and Cobalt Alloys

【发布单位或类别】 US-ASTM美国材料与试验协会
【发布日期】2000-11-10
【CCS分类】
【ICS分类】77.040.30

ISO 437:1982

Steel and cast iron — Determination of total carbon content — Combustion gravimetric method
Steel and cast iron — Determination of total carbon content — Combustion gravimetric method

【发布单位或类别】 IX-ISO国际标准化组织
【发布日期】1982-11-01
【CCS分类】
【ICS分类】77.080.01

BS ISO 16592:2006

Microbeam analysis. Electron probe microanalysis. Guidelines for determining the carbon content of steels using a calibration curve method
Microbeam analysis. Electron probe microanalysis. Guidelines for determining the carbon content of steels using a calibration curve method

【发布单位或类别】 GB-BSI英国标准学会
【发布日期】2006-10-31
【CCS分类】
【ICS分类】

ISO 16592:2006

Microbeam analysis — Electron probe microanalysis — Guidelines for determining the carbon content of steels using a calibration curve method
Microbeam analysis — Electron probe microanalysis — Guidelines for determining the carbon content of steels using a calibration curve method

【发布单位或类别】 IX-ISO国际标准化组织
【发布日期】2006-09-14
【CCS分类】
【ICS分类】71.040.50

ISO/TR 4830-4:1978

Steel — Determination of low carbon contents — Part 4: Coulometric method after combustion
Steel — Determination of low carbon contents — Part 4: Coulometric method after combustion

【发布单位或类别】 IX-ISO国际标准化组织
【发布日期】1978-04-01
【CCS分类】
【ICS分类】77.080.20

ISO 4936:1984

Steel and cast iron — Determination of chromium content — Diphenylcarbazide spectrophotometric method
Steel and cast iron — Determination of chromium content — Diphenylcarbazide spectrophotometric method

【发布单位或类别】 IX-ISO国际标准化组织
【发布日期】1984-11-01
【CCS分类】
【ICS分类】77.080.01

碳含量越高 钢硬度检测标准

CNAS认证

CMA认证

ISO认证

AAA诚信企业

微束分析 电子探针显微分析 测定钢中碳含量的校正曲线法 Microbeam analysis - Electron probe microanalysis - Guidelines for determining the carbon content of steels using calibration curve method

강 및 주철 — 총 탄소 함유량의 정량 —연소 무게분석법 Steel and cast iron — Determination of total carbon content —Combustion gravimetric method

철 및 강－탄소의 총량 분석－연소 무게법 Steel and cast iron－Determination of total carbon content－Combustion gravimetric method

마이크로빔 분석－전자 탐침 미소분석－검정곡선을 이용한 강재의 탄소 함량 정량 지침 Microbeam analysis－Electron probe microanalysis－Guidelines for determining the carbon content of steels using a calibration curve method

마이크로빔 분석－전자 탐침 미소분석－검정곡선을 이용한 강재의 탄소 함량 정량 지침 Microbeam analysis－Electron probe microanalysis－Guidelines for determining the carbon content of steels using a calibration curve method

Microbeam analysis. Electron probe microanalysis. Guidelines for determining the carbon content of steels using a calibration curve method Microbeam analysis. Electron probe microanalysis. Guidelines for determining the carbon content of steels using a calibration curve method

Microbeam analysis — Electron probe microanalysis — Guidelines for determining the carbon content of steels using a calibration curve method Microbeam analysis — Electron probe microanalysis — Guidelines for determining the carbon content of steels using a calibration curve method

Steel, Low Carbon Bars, Forgings, Tubing, Sheet, Strip, and Plate 0.25 Carbon, Maximum (Stabilized: Aug 2017) Steel, Low Carbon Bars, Forgings, Tubing, Sheet, Strip, and Plate 0.25 Carbon, Maximum (Stabilized: Aug 2017)

DETERMINATION OF LOW CARBON CONTENTS IN STEELS. VOLUMETRIE METOD. DETERMINATION OF LOW CARBON CONTENTS IN STEELS. VOLUMETRIE METOD.

DETERMINATION OF CAST IRON AND STEEL CARBON CONTENT. GASOMETRIC METHOD. DETERMINATION OF CAST IRON AND STEEL CARBON CONTENT. GASOMETRIC METHOD.

강－저농도 탄소 정량 방법－제4부：연소 후 전기량법 Steel－Determination of low carbon contents－Part 4：Coulometric method after combustion

Steel, Low Carbon Bars, Forgings, Tubing, Sheet, Strip, and Plate 0.25 Carbon, Maximum Steel, Low Carbon Bars, Forgings, Tubing, Sheet, Strip, and Plate 0.25 Carbon, Maximum

Standard Test Methods for Determination of Carbon, Sulfur, Nitrogen, and Oxygen in Steel and in Iron, Nickel, and Cobalt Alloys Standard Test Methods for Determination of Carbon, Sulfur, Nitrogen, and Oxygen in Steel and in Iron, Nickel, and Cobalt Alloys

Standard Test Methods for Determination of Carbon, Sulfur, Nitrogen, and Oxygen in Steel and in Iron, Nickel, and Cobalt Alloys Standard Test Methods for Determination of Carbon, Sulfur, Nitrogen, and Oxygen in Steel and in Iron, Nickel, and Cobalt Alloys

Standard Test Methods for Determination of Carbon, Sulfur, Nitrogen, and Oxygen in Steel and in Iron, Nickel, and Cobalt Alloys Standard Test Methods for Determination of Carbon, Sulfur, Nitrogen, and Oxygen in Steel and in Iron, Nickel, and Cobalt Alloys

Steel and cast iron — Determination of total carbon content — Combustion gravimetric method Steel and cast iron — Determination of total carbon content — Combustion gravimetric method

Microbeam analysis. Electron probe microanalysis. Guidelines for determining the carbon content of steels using a calibration curve method Microbeam analysis. Electron probe microanalysis. Guidelines for determining the carbon content of steels using a calibration curve method

Microbeam analysis — Electron probe microanalysis — Guidelines for determining the carbon content of steels using a calibration curve method Microbeam analysis — Electron probe microanalysis — Guidelines for determining the carbon content of steels using a calibration curve method

Steel — Determination of low carbon contents — Part 4: Coulometric method after combustion Steel — Determination of low carbon contents — Part 4: Coulometric method after combustion

Steel and cast iron — Determination of chromium content — Diphenylcarbazide spectrophotometric method Steel and cast iron — Determination of chromium content — Diphenylcarbazide spectrophotometric method

相关文章推荐

仪器设备

气相色谱仪

液相色谱仪

质谱仪

原子吸收光谱仪

红外光谱仪

X射线衍射仪

了解我们

检测优势

技术领先

设备先进

团队专业

快速高效

合作客户

需要专业检测服务？

在线咨询工程师

碳含量越高钢硬度检测标准

微束分析电子探针显微分析测定钢中碳含量的校正曲线法
Microbeam analysis - Electron probe microanalysis - Guidelines for determining the carbon content of steels using calibration curve method

강 및 주철 — 총 탄소 함유량의 정량 —연소 무게분석법
Steel and cast iron — Determination of total carbon content —Combustion gravimetric method

철 및 강－탄소의 총량 분석－연소 무게법
Steel and cast iron－Determination of total carbon content－Combustion gravimetric method

마이크로빔 분석－전자 탐침 미소분석－검정곡선을 이용한 강재의 탄소 함량 정량 지침
Microbeam analysis－Electron probe microanalysis－Guidelines for determining the carbon content of steels using a calibration curve method

마이크로빔 분석－전자 탐침 미소분석－검정곡선을 이용한 강재의 탄소 함량 정량 지침
Microbeam analysis－Electron probe microanalysis－Guidelines for determining the carbon content of steels using a calibration curve method

Microbeam analysis. Electron probe microanalysis. Guidelines for determining the carbon content of steels using a calibration curve method
Microbeam analysis. Electron probe microanalysis. Guidelines for determining the carbon content of steels using a calibration curve method

Microbeam analysis — Electron probe microanalysis — Guidelines for determining the carbon content of steels using a calibration curve method
Microbeam analysis — Electron probe microanalysis — Guidelines for determining the carbon content of steels using a calibration curve method

Steel, Low Carbon Bars, Forgings, Tubing, Sheet, Strip, and Plate 0.25 Carbon, Maximum (Stabilized: Aug 2017)
Steel, Low Carbon Bars, Forgings, Tubing, Sheet, Strip, and Plate 0.25 Carbon, Maximum (Stabilized: Aug 2017)

DETERMINATION OF LOW CARBON CONTENTS IN STEELS. VOLUMETRIE METOD.
DETERMINATION OF LOW CARBON CONTENTS IN STEELS. VOLUMETRIE METOD.

DETERMINATION OF CAST IRON AND STEEL CARBON CONTENT. GASOMETRIC METHOD.
DETERMINATION OF CAST IRON AND STEEL CARBON CONTENT. GASOMETRIC METHOD.

강－저농도 탄소 정량 방법－제4부：연소 후 전기량법
Steel－Determination of low carbon contents－Part 4：Coulometric method after combustion

Steel, Low Carbon Bars, Forgings, Tubing, Sheet, Strip, and Plate 0.25 Carbon, Maximum
Steel, Low Carbon Bars, Forgings, Tubing, Sheet, Strip, and Plate 0.25 Carbon, Maximum

Standard Test Methods for Determination of Carbon, Sulfur, Nitrogen, and Oxygen in Steel and in Iron, Nickel, and Cobalt Alloys
Standard Test Methods for Determination of Carbon, Sulfur, Nitrogen, and Oxygen in Steel and in Iron, Nickel, and Cobalt Alloys

Standard Test Methods for Determination of Carbon, Sulfur, Nitrogen, and Oxygen in Steel and in Iron, Nickel, and Cobalt Alloys
Standard Test Methods for Determination of Carbon, Sulfur, Nitrogen, and Oxygen in Steel and in Iron, Nickel, and Cobalt Alloys

Standard Test Methods for Determination of Carbon, Sulfur, Nitrogen, and Oxygen in Steel and in Iron, Nickel, and Cobalt Alloys
Standard Test Methods for Determination of Carbon, Sulfur, Nitrogen, and Oxygen in Steel and in Iron, Nickel, and Cobalt Alloys

Steel and cast iron — Determination of total carbon content — Combustion gravimetric method
Steel and cast iron — Determination of total carbon content — Combustion gravimetric method

Microbeam analysis. Electron probe microanalysis. Guidelines for determining the carbon content of steels using a calibration curve method
Microbeam analysis. Electron probe microanalysis. Guidelines for determining the carbon content of steels using a calibration curve method

Microbeam analysis — Electron probe microanalysis — Guidelines for determining the carbon content of steels using a calibration curve method
Microbeam analysis — Electron probe microanalysis — Guidelines for determining the carbon content of steels using a calibration curve method

Steel — Determination of low carbon contents — Part 4: Coulometric method after combustion
Steel — Determination of low carbon contents — Part 4: Coulometric method after combustion

Steel and cast iron — Determination of chromium content — Diphenylcarbazide spectrophotometric method
Steel and cast iron — Determination of chromium content — Diphenylcarbazide spectrophotometric method