甘油3d效果检测标准，甘油3d效果检测标准标准内容,检测中心-北检（北京）检测技术研究院

3D Displays

【发布单位或类别】 UNKNOWN其他未分类
【发布日期】2011-12-01
【CCS分类】
【ICS分类】

SAE AS85421/3D

FITTING, TEE, REDUCER, BEAM SEAL, 3000/4000 PSI, 3 MALE ENDS
FITTING, TEE, REDUCER, BEAM SEAL, 3000/4000 PSI, 3 MALE ENDS

【发布单位或类别】 US-SAE美国机动车工程师协会
【发布日期】2022-10-26
【CCS分类】
【ICS分类】

SAE AS81935/3D

LOCKING DEVICES (FOR ROD END BEARINGS)
LOCKING DEVICES (FOR ROD END BEARINGS)

【发布单位或类别】 US-SAE美国机动车工程师协会
【发布日期】2022-05-02
【CCS分类】
【ICS分类】

SAE AS22520/3D

CRIMPING TOOLS, TERMINAL, HAND, WIRE TERMINATION, INSPECTION GAGE FOR TYPE I AND II TOOLS
CRIMPING TOOLS, TERMINAL, HAND, WIRE TERMINATION, INSPECTION GAGE FOR TYPE I AND II TOOLS

【发布单位或类别】 US-SAE美国机动车工程师协会
【发布日期】2021-12-27
【CCS分类】
【ICS分类】

SAE AS1895/3D

FLANGE, FEMALE, SEAM WELD TYPE I STANDARD PROFILE
FLANGE, FEMALE, SEAM WELD TYPE I STANDARD PROFILE

【发布单位或类别】 US-SAE美国机动车工程师协会
【发布日期】2021-03-08
【CCS分类】
【ICS分类】

CID A-A-59440/3D

COCK, DRAIN, SPRING KEY, BRASS, 50 P.S.I., WATER, OIL, GAS (WOG), NPTF-1 THREADS
COCK, DRAIN, SPRING KEY, BRASS, 50 P.S.I., WATER, OIL, GAS (WOG), NPTF-1 THREADS

【发布单位或类别】 UNKNOWN其他未分类
【发布日期】2020-07-02
【CCS分类】
【ICS分类】

SAE AS85049/3D

CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, CABLE SEALING, STRAIGHT, CATEGORY 1A (FOR MIL-DTL-22992 CONNECTORS, CLASSES C, J, AND R)
CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, CABLE SEALING, STRAIGHT, CATEGORY 1A (FOR MIL-DTL-22992 CONNECTORS, CLASSES C, J, AND R)

【发布单位或类别】 US-SAE美国机动车工程师协会
【发布日期】2019-12-05
【CCS分类】
【ICS分类】

CID A-A-55564/3D

RESISTOR, VOLTAGE SENSITIVE (VARISTOR), METAL OXIDE, RADIAL LEAD
RESISTOR, VOLTAGE SENSITIVE (VARISTOR), METAL OXIDE, RADIAL LEAD

【发布单位或类别】 UNKNOWN其他未分类
【发布日期】2018-05-01
【CCS分类】
【ICS分类】

SAE AS81820/3D

BEARING, PLAIN, SELF-ALIGNING, SELF-LUBRICATING, LINED BORE, LOW SPEED, WIDE, GROOVED RACE, −65 TO +325 °F
BEARING, PLAIN, SELF-ALIGNING, SELF-LUBRICATING, LINED BORE, LOW SPEED, WIDE, GROOVED RACE, −65 TO +325 °F

【发布单位或类别】 US-SAE美国机动车工程师协会
【发布日期】2014-07-11
【CCS分类】
【ICS分类】

Exploring 3D Graphics

【发布单位或类别】 UNKNOWN其他未分类
【发布日期】1999-05-01
【CCS分类】
【ICS分类】

3D Computer Graphics

【发布单位或类别】 UNKNOWN其他未分类
【发布日期】1999-12-06
【CCS分类】
【ICS分类】

Introduction to 3D Data:Modeling with ArcGIS 3D Analyst and Google Earth

【发布单位或类别】 UNKNOWN其他未分类
【发布日期】2010-12-01
【CCS分类】
【ICS分类】

SAE AS7110/3D

Nadcap Requirements for Electron Beam Welding
Nadcap Requirements for Electron Beam Welding

【发布单位或类别】 US-SAE美国机动车工程师协会
【发布日期】2007-03-06
【CCS分类】
【ICS分类】

SAE AMS2451/3D

Plating, Brush, Nickel Low-Stress, Low-Hardness Deposit
Plating, Brush, Nickel Low-Stress, Low-Hardness Deposit

【发布单位或类别】 US-SAE美国机动车工程师协会
【发布日期】2022-11-22
【CCS分类】
【ICS分类】

SAE AMS3217/3D

Test Slabs, Chloroprene (CR) 70 - 80
Test Slabs, Chloroprene (CR) 70 - 80

【发布单位或类别】 US-SAE美国机动车工程师协会
【发布日期】2021-10-01
【CCS分类】
【ICS分类】

SAE AMS3799/3D

Webbing, Tubular, Low Modulus Aramid 1 (25) Wide, 4000 (17 793) Breaking Strength (Stabilized: Jul 2018)
Webbing, Tubular, Low Modulus Aramid 1 (25) Wide, 4000 (17 793) Breaking Strength (Stabilized: Jul 2018)

【发布单位或类别】 US-SAE美国机动车工程师协会
【发布日期】2018-07-31
【CCS分类】
【ICS分类】

SAE AMS3793/3D

Tape and Webbing, Textile. Para-Aramid Intermediate Modulus ¾ Inch (19 mm), 0.11 to 0.60 Ounces per Yard (3.4 to 18.6 g/m) (Stabilized: Jul 2018)
Tape and Webbing, Textile. Para-Aramid Intermediate Modulus ¾ Inch (19 mm), 0.11 to 0.60 Ounces per Yard (3.4 to 18.6 g/m) (Stabilized: Jul 2018)

【发布单位或类别】 US-SAE美国机动车工程师协会
【发布日期】2018-07-31
【CCS分类】
【ICS分类】

SAE AMS3901/3D

Yarn, Organic Fiber (Para-Aramid), High Modulus 1140 Denier (1270 d tex), 0.6% Finish
Yarn, Organic Fiber (Para-Aramid), High Modulus 1140 Denier (1270 d tex), 0.6% Finish

【发布单位或类别】 US-SAE美国机动车工程师协会
【发布日期】2014-07-30
【CCS分类】
【ICS分类】

3D Modeling of Buildings:Outstanding Sites

【发布单位或类别】 UNKNOWN其他未分类
【发布日期】2014-07-01
【CCS分类】
【ICS分类】

MIL MIL-PRF-31032/3D

Printed Wiring Board, Flexible, Single and Double Layer, with or without Plated-through Holes, with or without Stiffeners, for Soldered Part Mounting
Printed Wiring Board, Flexible, Single and Double Layer, with or without Plated-through Holes, with or without Stiffeners, for Soldered Part Mounting

【发布单位或类别】 US-MIL美国军事规范和标准
【发布日期】2020-04-03
【CCS分类】
【ICS分类】

甘油3d效果检测标准

FITTING, TEE, REDUCER, BEAM SEAL, 3000/4000 PSI, 3 MALE ENDS FITTING, TEE, REDUCER, BEAM SEAL, 3000/4000 PSI, 3 MALE ENDS

LOCKING DEVICES (FOR ROD END BEARINGS) LOCKING DEVICES (FOR ROD END BEARINGS)

CRIMPING TOOLS, TERMINAL, HAND, WIRE TERMINATION, INSPECTION GAGE FOR TYPE I AND II TOOLS CRIMPING TOOLS, TERMINAL, HAND, WIRE TERMINATION, INSPECTION GAGE FOR TYPE I AND II TOOLS

FLANGE, FEMALE, SEAM WELD TYPE I STANDARD PROFILE FLANGE, FEMALE, SEAM WELD TYPE I STANDARD PROFILE

COCK, DRAIN, SPRING KEY, BRASS, 50 P.S.I., WATER, OIL, GAS (WOG), NPTF-1 THREADS COCK, DRAIN, SPRING KEY, BRASS, 50 P.S.I., WATER, OIL, GAS (WOG), NPTF-1 THREADS

CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, CABLE SEALING, STRAIGHT, CATEGORY 1A (FOR MIL-DTL-22992 CONNECTORS, CLASSES C, J, AND R) CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, CABLE SEALING, STRAIGHT, CATEGORY 1A (FOR MIL-DTL-22992 CONNECTORS, CLASSES C, J, AND R)

RESISTOR, VOLTAGE SENSITIVE (VARISTOR), METAL OXIDE, RADIAL LEAD RESISTOR, VOLTAGE SENSITIVE (VARISTOR), METAL OXIDE, RADIAL LEAD

BEARING, PLAIN, SELF-ALIGNING, SELF-LUBRICATING, LINED BORE, LOW SPEED, WIDE, GROOVED RACE, −65 TO +325 °F BEARING, PLAIN, SELF-ALIGNING, SELF-LUBRICATING, LINED BORE, LOW SPEED, WIDE, GROOVED RACE, −65 TO +325 °F

Nadcap Requirements for Electron Beam Welding Nadcap Requirements for Electron Beam Welding

Plating, Brush, Nickel Low-Stress, Low-Hardness Deposit Plating, Brush, Nickel Low-Stress, Low-Hardness Deposit

Test Slabs, Chloroprene (CR) 70 - 80 Test Slabs, Chloroprene (CR) 70 - 80

Webbing, Tubular, Low Modulus Aramid 1 (25) Wide, 4000 (17 793) Breaking Strength (Stabilized: Jul 2018) Webbing, Tubular, Low Modulus Aramid 1 (25) Wide, 4000 (17 793) Breaking Strength (Stabilized: Jul 2018)

Tape and Webbing, Textile. Para-Aramid Intermediate Modulus ¾ Inch (19 mm), 0.11 to 0.60 Ounces per Yard (3.4 to 18.6 g/m) (Stabilized: Jul 2018) Tape and Webbing, Textile. Para-Aramid Intermediate Modulus ¾ Inch (19 mm), 0.11 to 0.60 Ounces per Yard (3.4 to 18.6 g/m) (Stabilized: Jul 2018)

Yarn, Organic Fiber (Para-Aramid), High Modulus 1140 Denier (1270 d tex), 0.6% Finish Yarn, Organic Fiber (Para-Aramid), High Modulus 1140 Denier (1270 d tex), 0.6% Finish

Printed Wiring Board, Flexible, Single and Double Layer, with or without Plated-through Holes, with or without Stiffeners, for Soldered Part Mounting Printed Wiring Board, Flexible, Single and Double Layer, with or without Plated-through Holes, with or without Stiffeners, for Soldered Part Mounting

北检院部分仪器展示