甘油二丙烯酸酯合成检测标准，甘油二丙烯酸酯合成检测标准标准内容,检测中心-北检（北京）检测技术研究院

HG/T 4947~4948-2016

光敏材料用三羟甲基丙烷三丙烯酸酯和二缩三丙二醇二丙烯酸酯 (2016)

【发布单位或类别】 CN-HG行业标准-化工
【发布日期】2016-01-15
【CCS分类】G15有机化工原料综合
【ICS分类】橡胶

GB/T 24797.3-2014

橡胶包装用薄膜第3部分：乙烯-丙烯-二烯烃橡胶（EPDM）、丙烯腈-丁二烯橡胶（NBR）、氢化丙烯腈-丁二烯橡胶（HNBR）、乙烯基丙烯酸酯橡胶（AEM）和丙烯酸酯橡胶（ACM）
Film for wrapping rubber bales―Part 3: Ethylene-propylene-diene rubber (EPDM)，acrylonitrilebutadiene rubber (NBR)，hydrogenated nitrile-butadiene rubber(HNBR)，acrylic-ethylene rubber (AEM) and acrylic rubber (ACM)

【发布单位或类别】 CN-GB国家标准
【发布日期】2014-07-08
【CCS分类】G35合成橡胶
【ICS分类】83.060相纸、胶卷和暗盒

HG/T 4948-2016

光敏材料用二缩三丙二醇二丙烯酸酯

【发布单位或类别】 CN-HG行业标准-化工
【发布日期】2016-01-15
【CCS分类】G81感光材料
【ICS分类】37.040.20热塑性塑料

SH/T 1846-2024

合成树脂瓦用丙烯腈-苯乙烯-丙烯酸酯（ASA）共挤专用料

【发布单位或类别】 CN-SH行业标准-石油化工
【发布日期】2024-03-29
【CCS分类】G32合成树脂、塑料
【ICS分类】83.080.20橡胶和塑料制品

DB35/T 1641-2017

丙烯腈-苯乙烯-丙烯酸酯三元共聚物（ASA）合成树脂瓦技术条件

【发布单位或类别】 CN-DB35福建省地方标准
【发布日期】2017-02-08
【CCS分类】Q22建筑用塑料制品
【ICS分类】83.140塑料管

\u0413\u041e\u0421\u0422 \u0420 \u0418\u0421\u041e 2507-3-2015

Трубы и соединительные детали из термопластов. Температура размягчения по Вика. Часть 3. Условия испытания труб и соединительных деталей из акрилонитрил-бутадиен-стирола и акрилонитрил-стирол-акрилата
Thermoplastics pipes and fittings. Vicat softening temperature. Part 3. Test conditions for acrylonitrile-butadiene-stirene and acrylonitrile-styrene-acrylate pipes and fittings

【发布单位或类别】 RU-GOST俄罗斯国家标准
【发布日期】
【CCS分类】G30/39合成材料
【ICS分类】23.040.20热塑性塑料

20231349-T-606

塑料丙烯腈-苯乙烯-丙烯酸酯（ASA）、丙烯腈-（乙烯-丙烯-二烯烃）-苯乙烯（AEPDS）、丙烯腈-（氯化聚乙烯）-苯乙烯（ACS）模塑和挤出材料第2部分：试样制备和性能测定
Plastics — Acrylonitrile-styrene-acrylate (ASA), acrylonitrile - (ethylene - propylene - diene) - styrene (AEPDS) and acrylonitrile - (chlorinated polyethylene) - styrene (ACS) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties

【发布单位或类别】 CN-PLAN国家标准计划
【发布日期】2023-12-01
【CCS分类】机械综合
【ICS分类】83.080.20热塑性塑料

20231364-T-606

塑料丙烯腈-苯乙烯-丙烯酸酯（ASA）、丙烯腈-（乙烯-丙烯-二烯烃）-苯乙烯（AEPDS）、丙烯腈-（氯化聚乙烯）-苯乙烯（ACS）模塑和挤出材料第1部分：命名系统和分类基础
Plastics—Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile- (chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials—Part 1:Designation system and basis for specifications

【发布单位或类别】 CN-PLAN国家标准计划
【发布日期】2023-12-01
【CCS分类】基础标准与通用方法
【ICS分类】83.080.20食品添加剂

BS EN ISO 19065-2:2019

Plastics. Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials-Preparation of test specimens and determination of properties
Plastics. Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials-Preparation of test specimens and determination of properties

【发布单位或类别】 GB-BSI英国标准学会
【发布日期】2019-04-10
【CCS分类】有机化工原料
【ICS分类】纺织纤维综合

BS EN ISO 19065-1:2014

Plastics. Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials-Designation system and basis for specifications
Plastics. Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials-Designation system and basis for specifications

【发布单位或类别】 GB-BSI英国标准学会
【发布日期】2014-12-31
【CCS分类】标准化、质量管理
【ICS分类】热塑性塑料

32013R0816

Commission Regulation (EU) No 816/2013 of 28 August 2013 amending Annex II to Regulation (EC) No 1333/2008 of the European Parliament and of the Council as regards the use of Neutral methacrylate copolymer and Anionic methacrylate copolymer in solid food supplements and the Annex to Commission Regulation (EU) No 231/2012 as regards the specifications for Basic methacrylate copolymer (E 1205), Neutral methacrylate copolymer and Anionic methacrylat
Commission Regulation (EU) No 816/2013 of 28 August 2013 amending Annex II to Regulation (EC) No 1333/2008 of the European Parliament and of the Council as regards the use of Neutral methacrylate copolymer and Anionic methacrylate copolymer in solid food supplements and the Annex to Commission Regulation (EU) No 231/2012 as regards the specifications for Basic methacrylate copolymer (E 1205), Neutral methacrylate copolymer and Anionic methacrylat

【发布单位或类别】 IX-EURLEX欧洲技术法规
【发布日期】2013-08-28
【CCS分类】J00/09一般有机化工原料
【ICS分类】67.220.20危险品防护

EN ISO 1833-12:2020

Textiles - Quantitative chemical analysis - Part 12: Mixtures of acrylic, certain modacrylics, certain chlorofibres, certain elastane fibres with certain other fibres (method using dimethylformamide) (ISO 1833-12:2020)

【发布单位或类别】 IX-CEN欧洲标准化委员会
【发布日期】2020-10-21
【CCS分类】W04一般有机化工原料
【ICS分类】59.060.01热塑性塑料

EN ISO 19065-2:2019

Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 19065-2:2019)

【发布单位或类别】 IX-CEN欧洲标准化委员会
【发布日期】2019-03-27
【CCS分类】G15/19
【ICS分类】83.080.20热塑性塑料

32016D2091

Commission Implementing Decision (EU) 2016/2091 of 28 November 2016 not to identify hexamethylene diacrylate (hexane-1,6-diol diacrylate) (HDDA) as a substance of very high concern pursuant to Article 57(f) of Regulation (EC) No 1907/2006 of the European Parliament and of the Council (notified under document C(2016) 7524) (Text with EEA relevance )

【发布单位或类别】 IX-EURLEX欧洲技术法规
【发布日期】2016-11-28
【CCS分类】A00
【ICS分类】13.300醇、醚

DIN EN ISO 2507-3

Thermoplastics pipes and fittings - Vicat softening temperature - Part 3: Test conditions for acrylonitrile/butadiene/styrene (ABS) and acrylonitrile/styrene/acrylic ester (ASA) pipes and fittings (ISO 2507-3:1995)
Thermoplastics pipes and fittings - Vicat softening temperature - Part 3: Test conditions for acrylonitrile/butadiene/styrene (ABS) and acrylonitrile/styrene/acrylic ester (ASA) pipes and fittings (ISO 2507-3:1995)

【发布单位或类别】 DE-DIN德国标准化学会
【发布日期】2018-01-01
【CCS分类】
【ICS分类】

ISO 19065-2:2019

Plastics — Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
Plastics — Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties

【发布单位或类别】 IX-ISO国际标准化组织
【发布日期】2019-02-27
【CCS分类】
【ICS分类】83.080.20

ISO 19065-1:2014

Plastics — Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials — Part 1: Designation system and basis for specifications
Plastics — Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials — Part 1: Designation system and basis for specifications

【发布单位或类别】 IX-ISO国际标准化组织
【发布日期】2014-11-17
【CCS分类】
【ICS分类】83.080.20

DIN EN ISO 19065-2

Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 19065-2:2019)
Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 19065-2:2019)

【发布单位或类别】 DE-DIN德国标准化学会
【发布日期】2019-06-01
【CCS分类】
【ICS分类】

GB/T\u300017530.4-1998

工业丙烯酸酯酸度的测定

【发布单位或类别】 CN-GB国家标准
【发布日期】1998-11-04
【CCS分类】G17
【ICS分类】

GB/T 17530.4-1998

工业丙烯酸酯酸度的测定
Acrylate esters for industrial use--Determination of acidity

【发布单位或类别】 CN-GB国家标准
【发布日期】1998-11-04
【CCS分类】G17
【ICS分类】71.080.60

甘油二丙烯酸酯合成检测标准