氢化双酚a环氧树脂检测标准
CNAS认证
CMA认证
GB/T 13657-2011
双酚A型环氧树脂
Bisphenol-A epoxy resin
- 【发布单位或类别】 CN-GB国家标准
- 【发布日期】2011-12-30
- 【CCS分类】G32合成树脂、塑料
- 【ICS分类】83.080.10热固性塑料
HG/T 6276-2024
双酚F型环氧树脂
- 【发布单位或类别】 CN-HG行业标准-化工
- 【发布日期】2024-03-29
- 【CCS分类】G32合成树脂、塑料
- 【ICS分类】83.080.10热固性塑料
GB/T 27809-2011
热固性粉末涂料用双酚A型环氧树脂
Bisphenol A epoxy resins for thermosetting powder coatings
- 【发布单位或类别】 CN-GB国家标准
- 【发布日期】2011-12-30
- 【CCS分类】G51涂料
- 【ICS分类】87.040涂料和清漆
GB/T 13657-1992
双酚-A型环氧树脂
Bisphenol—A epoxy resins
- 【发布单位或类别】 CN-GB国家标准
- 【发布日期】1992-09-01
- 【CCS分类】G32合成树脂、塑料
- 【ICS分类】83.080塑料
SN/T 3351-2012
进出口建筑用环氧树脂粘接剂中双酚A的测定
- 【发布单位或类别】 CN-SN行业标准-商品检验
- 【发布日期】2012-12-12
- 【CCS分类】Q27粘结材料
- 【ICS分类】83.120增强塑料
T/CSTM 01149-2024
氢化双酚A
- 【发布单位或类别】 CN-TUANTI团体标准
- 【发布日期】2024-04-29
- 【CCS分类】G化工
- 【ICS分类】71.080.90酚
SN/T 2379-2009
聚碳酸酯树脂及其成型品中双酚A的测定 气相色谱-质谱法
Determination of bisphenol A in polycarbonate resin and its products-Gas chromatography-mass spectrography
- 【发布单位或类别】 CN-SN行业标准-商品检验
- 【发布日期】2009-09-02
- 【CCS分类】G31合成树脂、塑料基础标准与通用方法
- 【ICS分类】71.040.50物理化学分析方法
ASTM A1055/A1055M-22
Standard Specification for Zinc and Epoxy Dual-Coated Steel Reinforcing Bars
Standard Specification for Zinc and Epoxy Dual-Coated Steel Reinforcing Bars
- 【发布单位或类别】 US-ASTM美国材料与试验协会
- 【发布日期】2022-09-01
- 【CCS分类】
- 【ICS分类】25.220.40金属镀层
SAE AMS3731/4C
Potting Compound, Epoxy Bisphenol A-Type Impregnating Resin, Heat Cure, Single Component
Potting Compound, Epoxy Bisphenol A-Type Impregnating Resin, Heat Cure, Single Component
- 【发布单位或类别】 US-SAE美国机动车工程师协会
- 【发布日期】2016-09-22
- 【CCS分类】
- 【ICS分类】
SAE AMS3672C
Plastic Molding Compound, Epi-Bis Epoxy, Glass Fiber Reinforced, Structural
Plastic Molding Compound, Epi-Bis Epoxy, Glass Fiber Reinforced, Structural
- 【发布单位或类别】 US-SAE美国机动车工程师协会
- 【发布日期】1995-10-01
- 【CCS分类】
- 【ICS分类】
MIL MIL-S-13949/12B Notice 1-Inactivation
SHEET, PRINTED WIRING BOARD, PREPREG, BASE MATERIAL GF (WOVEN E-GLASS REINFORCEMENT, MAJORITY DIFUNCTIONAL EPOXY RESIN, FLAME RESISTANT) (SUPERSEDING MIL-S-13949/12A) (NO S/S DOCUMENT)
SHEET, PRINTED WIRING BOARD, PREPREG, BASE MATERIAL GF (WOVEN E-GLASS REINFORCEMENT, MAJORITY DIFUNCTIONAL EPOXY RESIN, FLAME RESISTANT) (SUPERSEDING MIL-S-13949/12A) (NO S/S DOCUMENT)
- 【发布单位或类别】 US-MIL美国军事规范和标准
- 【发布日期】1997-08-01
- 【CCS分类】
- 【ICS分类】
MIL MIL-S-13949/11B Notice 1-Inactivation
SHEET, PRINTED WIRING BOARD, PREPREG, BASE MATERIAL GE (WOVEN E-GLASS REINFORCEMENT, MAJORITY DIFUNCTIONAL EPOXY RESIN) (SUPERSEDING MIL-S-13949/11A) (NO S/S DOCUMENT)
SHEET, PRINTED WIRING BOARD, PREPREG, BASE MATERIAL GE (WOVEN E-GLASS REINFORCEMENT, MAJORITY DIFUNCTIONAL EPOXY RESIN) (SUPERSEDING MIL-S-13949/11A) (NO S/S DOCUMENT)
- 【发布单位或类别】 US-MIL美国军事规范和标准
- 【发布日期】1997-08-01
- 【CCS分类】
- 【ICS分类】
MIL MIL-S-13949/11B
SHEET, PRINTED WIRING BOARD, PREPREG, BASE MATERIAL GE (WOVEN E-GLASS REINFORCEMENT, MAJORITY DIFUNCTIONAL EPOXY RESIN) (SUPERSEDING MIL-S-13949/11A) (NO S/S DOCUMENT)
SHEET, PRINTED WIRING BOARD, PREPREG, BASE MATERIAL GE (WOVEN E-GLASS REINFORCEMENT, MAJORITY DIFUNCTIONAL EPOXY RESIN) (SUPERSEDING MIL-S-13949/11A) (NO S/S DOCUMENT)
- 【发布单位或类别】 US-MIL美国军事规范和标准
- 【发布日期】1994-06-06
- 【CCS分类】
- 【ICS分类】
MIL MIL-S-13949/12B
SHEET, PRINTED WIRING BOARD, PREPREG, BASE MATERIAL GF (WOVEN E-GLASS REINFORCEMENT, MAJORITY DIFUNCTIONAL EPOXY RESIN, FLAME RESISTANT) (SUPERSEDING MIL-S-13949/12A) (NO S/S DOCUMENT)
SHEET, PRINTED WIRING BOARD, PREPREG, BASE MATERIAL GF (WOVEN E-GLASS REINFORCEMENT, MAJORITY DIFUNCTIONAL EPOXY RESIN, FLAME RESISTANT) (SUPERSEDING MIL-S-13949/12A) (NO S/S DOCUMENT)
- 【发布单位或类别】 US-MIL美国军事规范和标准
- 【发布日期】1993-08-16
- 【CCS分类】
- 【ICS分类】
SAE AMS3731/4B
POTTING COMPOUND, EPOXY Bisphenol A-Type Impregnating Resin, Heat Cure, Single Component (Noncurrent: Jan 1993)
POTTING COMPOUND, EPOXY Bisphenol A-Type Impregnating Resin, Heat Cure, Single Component (Noncurrent: Jan 1993)
- 【发布单位或类别】 US-SAE美国机动车工程师协会
- 【发布日期】1993-01-01
- 【CCS分类】
- 【ICS分类】
MIL MIL-S-13949/4D
SHEET, PRINTED WIRING BOARD, LAMINATED, BASE MATERIAL GF (WOVEN E-GLASS REINFORCEMENT, MAJORITY DIFUNCTIONAL EPOXY RESIN, FLAME RESISTANT, METAL CLAD OR UNCLAD) (SUPERSEDING MIL-S-13949/4C) (NO S/S DOCUMENT)
SHEET, PRINTED WIRING BOARD, LAMINATED, BASE MATERIAL GF (WOVEN E-GLASS REINFORCEMENT, MAJORITY DIFUNCTIONAL EPOXY RESIN, FLAME RESISTANT, METAL CLAD OR UNCLAD) (SUPERSEDING MIL-S-13949/4C) (NO S/S DOCUMENT)
- 【发布单位或类别】 US-MIL美国军事规范和标准
- 【发布日期】1993-08-16
- 【CCS分类】
- 【ICS分类】
MIL MIL-S-13949/4D Notice 2-Cancellation
SHEET, PRINTED WIRING BOARD, LAMINATED, BASE MATERIAL GF (WOVEN E-GLASS REINFORCEMENT, MAJORITY DIFUNCTIONAL EPOXY RESIN, FLAME RESISTANT, METAL CLAD OR UNCLAD) (SUPERSEDING MIL-S-13949/4C) (NO S/S DOCUMENT)
SHEET, PRINTED WIRING BOARD, LAMINATED, BASE MATERIAL GF (WOVEN E-GLASS REINFORCEMENT, MAJORITY DIFUNCTIONAL EPOXY RESIN, FLAME RESISTANT, METAL CLAD OR UNCLAD) (SUPERSEDING MIL-S-13949/4C) (NO S/S DOCUMENT)
- 【发布单位或类别】 US-MIL美国军事规范和标准
- 【发布日期】1998-11-30
- 【CCS分类】
- 【ICS分类】
MIL MIL-S-13949/4D Notice 1-Inactivation
SHEET, PRINTED WIRING BOARD, LAMINATED, BASE MATERIAL GF (WOVEN E-GLASS REINFORCEMENT, MAJORITY DIFUNCTIONAL EPOXY RESIN, FLAME RESISTANT, METAL CLAD OR UNCLAD) (SUPERSEDING MIL-S-13949/4C) (NO S/S DOCUMENT)
SHEET, PRINTED WIRING BOARD, LAMINATED, BASE MATERIAL GF (WOVEN E-GLASS REINFORCEMENT, MAJORITY DIFUNCTIONAL EPOXY RESIN, FLAME RESISTANT, METAL CLAD OR UNCLAD) (SUPERSEDING MIL-S-13949/4C) (NO S/S DOCUMENT)
- 【发布单位或类别】 US-MIL美国军事规范和标准
- 【发布日期】1997-08-01
- 【CCS分类】
- 【ICS分类】
MIL MIL-S-13949/4D Amendment 1
SHEET, PRINTED WIRING BOARD, LAMINATED, BASE MATERIAL GF (WOVEN E-GLASS REINFORCEMENT, MAJORITY DIFUNCTIONAL EPOXY RESIN, FLAME RESISTANT, METAL CLAD OR UNCLAD) (SUPERSEDING MIL-S-13949/4C) (NO S/S DOCUMENT)
SHEET, PRINTED WIRING BOARD, LAMINATED, BASE MATERIAL GF (WOVEN E-GLASS REINFORCEMENT, MAJORITY DIFUNCTIONAL EPOXY RESIN, FLAME RESISTANT, METAL CLAD OR UNCLAD) (SUPERSEDING MIL-S-13949/4C) (NO S/S DOCUMENT)
- 【发布单位或类别】 US-MIL美国军事规范和标准
- 【发布日期】1996-01-26
- 【CCS分类】
- 【ICS分类】
MIL MIL-P-13949/3B Notice 1-Cancellation
PLASTIC SHEET, LAMINATED, METAL-CLAD (FOR PRINTED WIRING BOARDS), BASE MATERIAL GE, GLASS BASE, WOVEN, MAJORITY DIFUNCTIONAL EPOXY RESIN, GENERAL PURPOSE, COPPER-CLAD (SUPERSEDING MIL-P-13949/3A) (S/S BY MIL-P-13949/4C)
PLASTIC SHEET, LAMINATED, METAL-CLAD (FOR PRINTED WIRING BOARDS), BASE MATERIAL GE, GLASS BASE, WOVEN, MAJORITY DIFUNCTIONAL EPOXY RESIN, GENERAL PURPOSE, COPPER-CLAD (SUPERSEDING MIL-P-13949/3A) (S/S BY MIL-P-13949/4C)
- 【发布单位或类别】 US-MIL美国军事规范和标准
- 【发布日期】1988-06-14
- 【CCS分类】
- 【ICS分类】
