环氧树脂玻璃钢防腐检测标准
CNAS认证
CMA认证
SC/T 8063-2001
玻璃钢渔船用不饱和聚酯树脂和玻璃纤维制品
Unsaturated polyester resin and fiberglass products for glass fiber reinforced plastics fishing vessels
- 【发布单位或类别】 CN-SC行业标准-水产
- 【发布日期】2001-06-01
- 【CCS分类】U05船舶用材料及其检验方法
- 【ICS分类】47.020造船和海上构筑物综合
GB/T 8237-1987
玻璃纤维增强塑料(玻璃钢)用液体不饱和聚酯树脂
Liquid unsaturated polyester resin for glass fiber reinforced plastics
- 【发布单位或类别】 CN-GB国家标准
- 【发布日期】1987-10-05
- 【CCS分类】G32合成树脂、塑料
- 【ICS分类】83.120增强塑料
QJ 1179-1987
玻璃钢蜂窝芯子树脂含量试验方法
- 【发布单位或类别】 CN-QJ行业标准-航天
- 【发布日期】1987-05-07
- 【CCS分类】压缩机、风机
- 【ICS分类】通风机、风扇、空调器
AWWA ACE93178
Fusion Bonded Epoxy for Flow Efficiency and Corrosion Protection of Steel and Ductile Iron Pipe
Fusion Bonded Epoxy for Flow Efficiency and Corrosion Protection of Steel and Ductile Iron Pipe
- 【发布单位或类别】 US-AWWA美国给水工程协会
- 【发布日期】1993-01-01
- 【CCS分类】
- 【ICS分类】纺织玻璃纤维材料
T/SLEA 0061.1-2022
实验室用通风机技术规范 第1部分：玻璃钢防腐离心通风机
- 【发布单位或类别】 CN-TUANTI团体标准
- 【发布日期】2022-09-17
- 【CCS分类】J72
- 【ICS分类】23.120纺织玻璃纤维材料
KS M ISO 3597-2-2012(2017)
유리섬유강화 플라스틱－로빙 강화 수지로 만든 봉의 기계적 물성의 측정－제2부：굴곡 강도
Textile-glass-reinforced plastics－Determination of mechanical properties on rods made of roving-reinforced resin－Part 2：Determination of flexural strength
- 【发布单位或类别】 KR-KS韩国标准
- 【发布日期】2012-12-22
- 【CCS分类】
- 【ICS分类】纺织玻璃纤维材料
KS M ISO 3597-3-2012(2017)
유리섬유강화 플라스틱－로빙 강화 수지로 만든 봉의 기계적 물성의 측정－제3부：압축 강도
Textile-glass-reinforced plastics－Determination of mechanical properties on rods made of roving-reinforced resin－Part 3：Determination of compressive strength
- 【发布单位或类别】 KR-KS韩国标准
- 【发布日期】2012-12-22
- 【CCS分类】
- 【ICS分类】纺织玻璃纤维材料
KS M 3370-2020
수도용 플라스틱 배관 시스템 —불포화 폴리에스테르 수지 유리섬유 강화 플라스틱(GRP) — 압력 및 비압력 배관
Plastics piping systems for water supply — Glass reinforced thermosetting plastics(GRP) based on unsaturated polyester(UP) resin — Pressure and non-pressure piping system
- 【发布单位或类别】 KR-KS韩国标准
- 【发布日期】2020-12-30
- 【CCS分类】
- 【ICS分类】塑料管
KS M ISO 3597-4-2012(2017)
유리섬유강화 플라스틱－로빙 강화 수지로 만든 봉의 기계적 물성의 측정－제4부：겉보기 층간 전단 강도
Textile-glass-reinforced plastics－Determination of mechanical properties on rods made of roving-reinforced resin－Part 4：Determination of apparent interlaminar shear strength
- 【发布单位或类别】 KR-KS韩国标准
- 【发布日期】2012-12-22
- 【CCS分类】
- 【ICS分类】塑料管
ISO 3597-2:2003
Textile-glass-reinforced plastics — Determination of mechanical properties on rods made of roving-reinforced resin — Part 2: Determination of flexural strength
Textile-glass-reinforced plastics — Determination of mechanical properties on rods made of roving-reinforced resin — Part 2: Determination of flexural strength
- 【发布单位或类别】 IX-ISO国际标准化组织
- 【发布日期】2003-09-24
- 【CCS分类】
- 【ICS分类】59.100.10塑料管
ISO 3597-3:2003
Textile-glass-reinforced plastics — Determination of mechanical properties on rods made of roving-reinforced resin — Part 3: Determination of compressive strength
Textile-glass-reinforced plastics — Determination of mechanical properties on rods made of roving-reinforced resin — Part 3: Determination of compressive strength
- 【发布单位或类别】 IX-ISO国际标准化组织
- 【发布日期】2003-09-29
- 【CCS分类】
- 【ICS分类】59.100.10塑料管
ISO 3597-4:2003
Textile-glass-reinforced plastics — Determination of mechanical properties on rods made of roving-reinforced resin — Part 4: Determination of apparent interlaminar shear strength
Textile-glass-reinforced plastics — Determination of mechanical properties on rods made of roving-reinforced resin — Part 4: Determination of apparent interlaminar shear strength
- 【发布单位或类别】 IX-ISO国际标准化组织
- 【发布日期】2003-09-29
- 【CCS分类】
- 【ICS分类】59.100.10
ISO 3597-1:2003
Textile-glass-reinforced plastics — Determination of mechanical properties on rods made of roving-reinforced resin — Part 1: General considerations and preparation of rods
Textile-glass-reinforced plastics — Determination of mechanical properties on rods made of roving-reinforced resin — Part 1: General considerations and preparation of rods
- 【发布单位或类别】 IX-ISO国际标准化组织
- 【发布日期】2003-09-24
- 【CCS分类】
- 【ICS分类】59.100.10
ASTM F2019-11
Standard Practice for Rehabilitation of Existing Pipelines and Conduits by the Pulled in Place Installation of Glass Reinforced Plastic (GRP) Cured-in-Place Thermosetting Resin Pipe (CIPP)
Standard Practice for Rehabilitation of Existing Pipelines and Conduits by the Pulled in Place Installation of Glass Reinforced Plastic (GRP) Cured-in-Place Thermosetting Resin Pipe (CIPP)
- 【发布单位或类别】 US-ASTM美国材料与试验协会
- 【发布日期】2011-09-01
- 【CCS分类】
- 【ICS分类】23.040.20
ASTM F2019-03(2009)
Standard Practice for Rehabilitation of Existing Pipelines and Conduits by the Pulled in Place Installation of Glass Reinforced Plastic (GRP) Cured-in-Place Thermosetting Resin Pipe (CIPP)
Standard Practice for Rehabilitation of Existing Pipelines and Conduits by the Pulled in Place Installation of Glass Reinforced Plastic (GRP) Cured-in-Place Thermosetting Resin Pipe (CIPP)
- 【发布单位或类别】 US-ASTM美国材料与试验协会
- 【发布日期】2009-08-01
- 【CCS分类】
- 【ICS分类】23.040.20
ASTM F2019-03
Standard Practice for Rehabilitation of Existing Pipelines and Conduits by the Pulled in Place Installation of Glass Reinforced Plastic (GRP) Cured-in-Place Thermosetting Resin Pipe (CIPP)
Standard Practice for Rehabilitation of Existing Pipelines and Conduits by the Pulled in Place Installation of Glass Reinforced Plastic (GRP) Cured-in-Place Thermosetting Resin Pipe (CIPP)
- 【发布单位或类别】 US-ASTM美国材料与试验协会
- 【发布日期】2003-09-10
- 【CCS分类】
- 【ICS分类】23.040.20
ASTM F2019-00
Standard Practice for Rehabilitation of Existing Pipelines and Conduits by the Pulled in Place Installation of Glass Reinforced Plastic (GRP) Cured-in-Place Thermosetting Resin Pipe (CIPP)
Standard Practice for Rehabilitation of Existing Pipelines and Conduits by the Pulled in Place Installation of Glass Reinforced Plastic (GRP) Cured-in-Place Thermosetting Resin Pipe (CIPP)
- 【发布单位或类别】 US-ASTM美国材料与试验协会
- 【发布日期】2000-05-10
- 【CCS分类】
- 【ICS分类】23.040.20
