压脂层树脂检测标准，压脂层树脂检测标准标准内容,检测中心-北检（北京）检测技术研究院

GB/T 35157-2017(\u82f1\u6587\u7248)

树脂型合成石板材
树脂型合成石板材

【发布单位或类别】 CN-GB国家标准
【发布日期】2017-12-29
【CCS分类】Q21石材制品
【ICS分类】其他绝缘材料

GB/T 1303.5-2017

电气用热固性树脂工业硬质层压板第5部分：三聚氰胺树脂硬质层压板
Industrial rigid laminated sheets based on thermosetting resins for electrical purposes—Part 5: Requirements for rigid laminated sheets based on melamine resins

【发布单位或类别】 CN-GB国家标准
【发布日期】2017-09-29
【CCS分类】K15电工绝缘材料及其制品
【ICS分类】29.035.99绝缘材料综合

GB/T 1303.6-2009

电气用热固性树脂工业硬质层压板第6部分：酚醛树脂硬质层压板
Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 6: Requirements for rigid laminated sheets based on phenolic resins

【发布单位或类别】 CN-GB国家标准
【发布日期】2009-06-10
【CCS分类】K15电工绝缘材料及其制品
【ICS分类】29.035.01其他绝缘材料

GB/T 1303.4-2009

电气用热固性树脂工业硬质层压板第4部分：环氧树脂硬质层压板
Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 4: Requirements for rigid laminated sheets based on epoxy resins

【发布单位或类别】 CN-GB国家标准
【发布日期】2009-06-10
【CCS分类】K15电工绝缘材料及其制品
【ICS分类】29.035.99绝缘材料综合

GB/T 1303.7-2009

电气用热固性树脂工业硬质层压板第7部分：聚酯树脂硬质层压板
Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 7: Requirements for rigid laminated sheets based on polyester resins

【发布单位或类别】 CN-GB国家标准
【发布日期】2009-06-10
【CCS分类】K15电工绝缘材料及其制品
【ICS分类】29.035.01其他绝缘材料

GB/T 1303.8-2009

电气用热固性树脂工业硬质层压板第8部分：有机硅树脂硬质层压板
Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 8: Requirements for rigid laminated sheets based on silicone resins

【发布单位或类别】 CN-GB国家标准
【发布日期】2009-06-10
【CCS分类】K15电工绝缘材料及其制品
【ICS分类】29.035.99绝缘材料综合

GB/T 1303.9-2009

电气用热固性树脂工业硬质层压板第9部分：聚酰亚胺树脂硬质层压板
Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 9: Requirements for rigid laminated sheets based on polyimide resins

【发布单位或类别】 CN-GB国家标准
【发布日期】2009-06-10
【CCS分类】K15电工绝缘材料及其制品
【ICS分类】29.035.01绝缘材料综合

GB/T 1303.10-2009

电气用热固性树脂工业硬质层压板第10部分：双马来酰亚胺树脂硬质层压板
Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 10: Requirements for rigid laminated sheets based on bis-maleimide resins

【发布单位或类别】 CN-GB国家标准
【发布日期】2009-06-10
【CCS分类】K15电工绝缘材料及其制品
【ICS分类】29.035.01绝缘材料综合

GB/T 1303.11-2009

电气用热固性树脂工业硬质层压板第11部分：聚酰胺酰亚胺树脂硬质层压板
Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 11: Requirements for rigid laminated sheets based on polyamide-imide resins

【发布单位或类别】 CN-GB国家标准
【发布日期】2009-06-10
【CCS分类】K15电工绝缘材料及其制品
【ICS分类】29.035.01木基板材综合

GB/T 7911-2024

热固性树脂浸渍纸高压装饰层积板（HPL）
High-pressure decorative laminates made from thermosetting resins impregnated sheets (HPL)

【发布单位或类别】 CN-GB国家标准
【发布日期】2024-03-15
【CCS分类】B70人造板
【ICS分类】79.060.01绝缘材料综合

GB/T 5132.3-2024

电气用热固性树脂工业硬质圆形层压管和棒第3部分：圆形层压卷制管
Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes—Part 3：Round laminated rolled tubes

【发布单位或类别】 CN-GB国家标准
【发布日期】2024-09-29
【CCS分类】K15电工绝缘材料及其制品
【ICS分类】29.035.01绝缘材料综合

GB/T 5132.4-2024

电气用热固性树脂工业硬质圆形层压管和棒第4部分：圆形层压模制管
Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes—Part 4：Round laminated moulded tubes

【发布单位或类别】 CN-GB国家标准
【发布日期】2024-09-29
【CCS分类】K15电工绝缘材料及其制品
【ICS分类】29.035.01绝缘材料综合

GB/T 1303.12-2022

电气用热固性树脂工业硬质层压板第12部分：典型值
Industrial rigid laminated sheets based on thermosetting resins for electrical purposes—Part 12：Typical values

【发布单位或类别】 CN-GB国家标准
【发布日期】2022-07-11
【CCS分类】K15电工绝缘材料及其制品
【ICS分类】29.035.01绝缘材料综合

GB/T 1303.3-2008

电气用热固性树脂工业硬质层压板第3部分：工业硬质层压板型号
Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3: Requirements for types of industrial rigid laminated sheets

【发布单位或类别】 CN-GB国家标准
【发布日期】2008-12-30
【CCS分类】K15电工绝缘材料及其制品
【ICS分类】29.035.01其他绝缘材料

GB/T 5132.5-2009

电气用热固性树脂工业硬质圆形层压管和棒第5部分：圆形层压模制棒
Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 5: Round laminated moulded rods

【发布单位或类别】 CN-GB国家标准
【发布日期】2009-06-10
【CCS分类】K15电工绝缘材料及其制品
【ICS分类】29.035.99其他绝缘材料

GB/T 1303.2-2009

电气用热固性树脂工业硬质层压板第2部分：试验方法
Industrial rigid laminated sheets based on thermosetting for electrical purposes - Part 2: Test methods

【发布单位或类别】 CN-GB国家标准
【发布日期】2009-06-10
【CCS分类】K15电工绝缘材料及其制品
【ICS分类】29.035.99其他绝缘材料

GB/T 5132.1-2009

电气用热固性树脂工业硬质圆形层压管和棒第1部分：一般要求
Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 1: General requirements

【发布单位或类别】 CN-GB国家标准
【发布日期】2009-06-10
【CCS分类】K15电工绝缘材料及其制品
【ICS分类】29.035.99其他绝缘材料

GB/T 5132.2-2009

电气用热固性树脂工业硬质圆形层压管和棒第2部分：试验方法
Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 2: Methods of test

【发布单位或类别】 CN-GB国家标准
【发布日期】2009-06-10
【CCS分类】K15电工绝缘材料及其制品
【ICS分类】29.035.99其他绝缘材料

GB/T 1303.1-2009

电气用热固性树脂工业硬质层压板第1部分：定义、分类和一般要求
Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 1: Definitions, designations and general requirements

【发布单位或类别】 CN-GB国家标准
【发布日期】2009-06-10
【CCS分类】K15电工绝缘材料及其制品
【ICS分类】29.035.99其他绝缘材料

20243218-T-604

电气用热固性树脂工业硬质层压板第13部分：苯并噁嗪树脂硬质层压板
Industrial rigid laminated sheets based on thermosetting resins for electrical purposes—Part 13: Rigid laminated sheets based on benzoxazine resin

【发布单位或类别】 CN-PLAN国家标准计划
【发布日期】2024-10-26
【CCS分类】
【ICS分类】29.035.99

压脂层树脂检测标准

树脂型合成石板材 树脂型合成石板材

电气用热固性树脂工业硬质层压板 第5部分：三聚氰胺树脂硬质层压板 Industrial rigid laminated sheets based on thermosetting resins for electrical purposes—Part 5: Requirements for rigid laminated sheets based on melamine resins

电气用热固性树脂工业硬质层压板 第6部分：酚醛树脂硬质层压板 Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 6: Requirements for rigid laminated sheets based on phenolic resins

电气用热固性树脂工业硬质层压板 第4部分：环氧树脂硬质层压板 Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 4: Requirements for rigid laminated sheets based on epoxy resins

电气用热固性树脂工业硬质层压板 第7部分：聚酯树脂硬质层压板 Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 7: Requirements for rigid laminated sheets based on polyester resins

电气用热固性树脂工业硬质层压板 第8部分：有机硅树脂硬质层压板 Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 8: Requirements for rigid laminated sheets based on silicone resins

电气用热固性树脂工业硬质层压板 第9部分：聚酰亚胺树脂硬质层压板 Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 9: Requirements for rigid laminated sheets based on polyimide resins

电气用热固性树脂工业硬质层压板 第10部分：双马来酰亚胺树脂硬质层压板 Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 10: Requirements for rigid laminated sheets based on bis-maleimide resins

电气用热固性树脂工业硬质层压板 第11部分：聚酰胺酰亚胺树脂硬质层压板 Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 11: Requirements for rigid laminated sheets based on polyamide-imide resins

热固性树脂浸渍纸高压装饰层积板（HPL） High-pressure decorative laminates made from thermosetting resins impregnated sheets (HPL)

电气用热固性树脂工业硬质圆形层压管和棒 第3部分：圆形层压卷制管 Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes—Part 3：Round laminated rolled tubes

电气用热固性树脂工业硬质圆形层压管和棒 第4部分：圆形层压模制管 Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes—Part 4：Round laminated moulded tubes

电气用热固性树脂工业硬质层压板 第12部分：典型值 Industrial rigid laminated sheets based on thermosetting resins for electrical purposes—Part 12：Typical values

电气用热固性树脂工业硬质层压板 第3部分：工业硬质层压板型号 Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3: Requirements for types of industrial rigid laminated sheets

电气用热固性树脂工业硬质圆形层压管和棒 第5部分：圆形层压模制棒 Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 5: Round laminated moulded rods

电气用热固性树脂工业硬质层压板 第2部分：试验方法 Industrial rigid laminated sheets based on thermosetting for electrical purposes - Part 2: Test methods

电气用热固性树脂工业硬质圆形层压管和棒 第1部分：一般要求 Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 1: General requirements

电气用热固性树脂工业硬质圆形层压管和棒 第2部分：试验方法 Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 2: Methods of test

电气用热固性树脂工业硬质层压板 第1部分：定义、分类和一般要求 Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 1: Definitions, designations and general requirements

电气用热固性树脂工业硬质层压板 第13部分：苯并噁嗪树脂硬质层压板 Industrial rigid laminated sheets based on thermosetting resins for electrical purposes—Part 13: Rigid laminated sheets based on benzoxazine resin

北检院部分仪器展示