环氧树脂分子结构检测标准，环氧树脂分子结构检测标准标准内容,检测中心-北检（北京）检测技术研究院

QJ 1870-1990

环氧树脂分子量及其分布测试方法(GPC法)

【发布单位或类别】 CN-QJ行业标准-航天
【发布日期】1990-01-20
【CCS分类】V13航空与航天用非金属材料
【ICS分类】教育

JY/T 0588-2020

单晶X射线衍射仪测定小分子化合物的晶体及分子结构分析方法通则
General rules for crystal and molecular structure determination of small molecules by single crystal X-ray diffractometer

【发布单位或类别】 CN-JY行业标准-教育
【发布日期】2020-09-29
【CCS分类】Y51教学专用仪器
【ICS分类】03.180粘合料、密封材料

KS F 4043-2023

콘크리트 구조물 보수용 에폭시 수지 모르타르
Epoxy resin mortar for restoration in concrete structure

【发布单位或类别】 KR-KS韩国标准
【发布日期】2023-12-29
【CCS分类】土木、建筑
【ICS分类】91.100.50涂料和清漆

KS F 4921-2016(2021)

콘크리트용 에폭시 수지계 방수ㆍ방식재
Epoxy resin material for waterproof and anticorrosion of concrete structure

【发布单位或类别】 KR-KS韩国标准
【发布日期】2016-11-24
【CCS分类】质谱仪、液谱仪、能谱仪及其联用装置
【ICS分类】87.040粘合料、密封材料

KS F 4043-2008(2018)

콘크리트 구조물 보수용 에폭시 수지 모르타르
Epoxy resin mortar for restoration in concrete structure

【发布单位或类别】 KR-KS韩国标准
【发布日期】2008-12-30
【CCS分类】
【ICS分类】91.100.50涂料和清漆

KS F 4921-2016

콘크리트용 에폭시 수지계 방수ㆍ방식재
Epoxy resin material for waterproof and anticorrosion of concrete structure

【发布单位或类别】 KR-KS韩国标准
【发布日期】2016-11-24
【CCS分类】
【ICS分类】87.040涂料涂覆工艺

KS F 9001-2019

콘크리트용 에폭시 수지계 방수·방식도료 도포방법 시공표준
Standard coating method of epoxy resin paints for waterproof and anticorrosion of concretes structures

【发布单位或类别】 KR-KS韩国标准
【发布日期】2019-12-31
【CCS分类】
【ICS分类】87.020水力工程

T/CASME 1665-2024

水利工程混凝土结构表层裂缝环氧树脂修复材料应用技术规程

【发布单位或类别】 CN-TUANTI团体标准
【发布日期】2024-09-06
【CCS分类】P
【ICS分类】27.140热塑性塑料

AS 3750.10-2008

Paints for steel structures, Part 10: Full gloss epoxy (two-pack)
Paints for steel structures, Part 10: Full gloss epoxy (two-pack)

【发布单位或类别】 AU-AS澳大利亚标准
【发布日期】2008-01-01
【CCS分类】
【ICS分类】印制电路和印制电路板

SAE AMS3671C

Plastic Molding Compound, Novolac Epoxy Resin, Short Glass Fiber Reinforced, Structural
Plastic Molding Compound, Novolac Epoxy Resin, Short Glass Fiber Reinforced, Structural

【发布单位或类别】 US-SAE美国机动车工程师协会
【发布日期】1996-10-01
【CCS分类】
【ICS分类】

AS/NZS 3750.14:1997

Paints for steel structures, Part 14: High-build epoxy (two-pack)
Paints for steel structures, Part 14: High-build epoxy (two-pack)

【发布单位或类别】 AU-AS/NZS澳大利亚/新西兰标准
【发布日期】1997-11-05
【CCS分类】
【ICS分类】

MIL MIL-A-82832

ADHESIVE, EPOXY RESIN, STRUCTURAL BONDING (NO S/S DOCUMENT)
ADHESIVE, EPOXY RESIN, STRUCTURAL BONDING (NO S/S DOCUMENT)

【发布单位或类别】 US-MIL美国军事规范和标准
【发布日期】1990-02-05
【CCS分类】
【ICS分类】

MIL MIL-A-82836 Notice 1-Cancellation

ADHESIVE, EPOXY RESIN, STRUCTURAL BONDING, NON-ASBESTOS (NO S/S DOCUMENT)
ADHESIVE, EPOXY RESIN, STRUCTURAL BONDING, NON-ASBESTOS (NO S/S DOCUMENT)

【发布单位或类别】 US-MIL美国军事规范和标准
【发布日期】1993-02-25
【CCS分类】
【ICS分类】

SAE AMS3672C

Plastic Molding Compound, Epi-Bis Epoxy, Glass Fiber Reinforced, Structural
Plastic Molding Compound, Epi-Bis Epoxy, Glass Fiber Reinforced, Structural

【发布单位或类别】 US-SAE美国机动车工程师协会
【发布日期】1995-10-01
【CCS分类】
【ICS分类】

ASTM D3364-99(2019)

Standard Test Method for Flow Rates for Poly(Vinyl Chloride) with Molecular Structural Implications
Standard Test Method for Flow Rates for Poly(Vinyl Chloride) with Molecular Structural Implications

【发布单位或类别】 US-ASTM美国材料与试验协会
【发布日期】2019-05-01
【CCS分类】
【ICS分类】83.080.20

QPL QPL-MMM-A-134-11 Notice 1-Inactivation

ADHESIVES, EPROXY RESIN, METAL TO METAL STRUCTURAL BONDING (SUPERSEDING QPL-MMM-A-134-10)
ADHESIVES, EPROXY RESIN, METAL TO METAL STRUCTURAL BONDING (SUPERSEDING QPL-MMM-A-134-10)

【发布单位或类别】 UNKNOWN其他未分类
【发布日期】2001-04-19
【CCS分类】
【ICS分类】

BS EN 1877-1:2000

Products and systems for the protection and repair of concrete structures. Test methods. Reactive functions related to epoxy resins-Determination of epoxy equivalent
Products and systems for the protection and repair of concrete structures. Test methods. Reactive functions related to epoxy resins-Determination of epoxy equivalent

【发布单位或类别】 GB-BSI英国标准学会
【发布日期】2000-10-15
【CCS分类】
【ICS分类】

JY/T 008-1996

四圆单晶X射线衍射仪测定小分子化合物的晶体及分子结构分析方法通则
General rules for crystal and molecular structure determination of small molecules by four-circle single crystal X-ray diffractometer

【发布单位或类别】 CN-JY行业标准-教育
【发布日期】1997-01-23
【CCS分类】N54
【ICS分类】

AS/NZS 3750.10:1994

Paints for steel structures, Part 10: Full gloss epoxy (two-pack)
Paints for steel structures, Part 10: Full gloss epoxy (two-pack)

【发布单位或类别】 AU-AS/NZS澳大利亚/新西兰标准
【发布日期】1995-03-05
【CCS分类】
【ICS分类】

IEC 61249-2-39:2012

Materials for printed boards and other interconnecting structures - Part 2-39: Reinforced base materials clad and unclad - High performance epoxide and non-epoxide, woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly
Materials for printed boards and other interconnecting structures - Part 2-39: Reinforced base materials clad and unclad - High performance epoxide and non-epoxide, woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly

【发布单位或类别】 IX-IEC国际电工委员会
【发布日期】2012-11-29
【CCS分类】
【ICS分类】31.180

环氧树脂分子结构检测标准

环氧树脂分子量及其分布测试方法(GPC法)

单晶X射线衍射仪测定小分子化合物的晶体及分子结构分析方法通则 General rules for crystal and molecular structure determination of small molecules by single crystal X-ray diffractometer

콘크리트 구조물 보수용 에폭시 수지 모르타르 Epoxy resin mortar for restoration in concrete structure

콘크리트용 에폭시 수지계 방수ㆍ방식재 Epoxy resin material for waterproof and anticorrosion of concrete structure

콘크리트 구조물 보수용 에폭시 수지 모르타르 Epoxy resin mortar for restoration in concrete structure

콘크리트용 에폭시 수지계 방수ㆍ방식재 Epoxy resin material for waterproof and anticorrosion of concrete structure

콘크리트용 에폭시 수지계 방수·방식도료 도포방법 시공표준 Standard coating method of epoxy resin paints for waterproof and anticorrosion of concretes structures

水利工程混凝土结构表层裂缝环氧树脂修复材料应用技术规程

Paints for steel structures, Part 10: Full gloss epoxy (two-pack) Paints for steel structures, Part 10: Full gloss epoxy (two-pack)

Plastic Molding Compound, Novolac Epoxy Resin, Short Glass Fiber Reinforced, Structural Plastic Molding Compound, Novolac Epoxy Resin, Short Glass Fiber Reinforced, Structural

Paints for steel structures, Part 14: High-build epoxy (two-pack) Paints for steel structures, Part 14: High-build epoxy (two-pack)

ADHESIVE, EPOXY RESIN, STRUCTURAL BONDING (NO S/S DOCUMENT) ADHESIVE, EPOXY RESIN, STRUCTURAL BONDING (NO S/S DOCUMENT)

ADHESIVE, EPOXY RESIN, STRUCTURAL BONDING, NON-ASBESTOS (NO S/S DOCUMENT) ADHESIVE, EPOXY RESIN, STRUCTURAL BONDING, NON-ASBESTOS (NO S/S DOCUMENT)

Plastic Molding Compound, Epi-Bis Epoxy, Glass Fiber Reinforced, Structural Plastic Molding Compound, Epi-Bis Epoxy, Glass Fiber Reinforced, Structural

Standard Test Method for Flow Rates for Poly(Vinyl Chloride) with Molecular Structural Implications Standard Test Method for Flow Rates for Poly(Vinyl Chloride) with Molecular Structural Implications

ADHESIVES, EPROXY RESIN, METAL TO METAL STRUCTURAL BONDING (SUPERSEDING QPL-MMM-A-134-10) ADHESIVES, EPROXY RESIN, METAL TO METAL STRUCTURAL BONDING (SUPERSEDING QPL-MMM-A-134-10)

四圆单晶X射线衍射仪测定小分子化合物的晶体及分子结构分析方法通则 General rules for crystal and molecular structure determination of small molecules by four-circle single crystal X-ray diffractometer

Paints for steel structures, Part 10: Full gloss epoxy (two-pack) Paints for steel structures, Part 10: Full gloss epoxy (two-pack)

北检院部分仪器展示

单晶X射线衍射仪测定小分子化合物的晶体及分子结构分析方法通则
General rules for crystal and molecular structure determination of small molecules by single crystal X-ray diffractometer

콘크리트 구조물 보수용 에폭시 수지 모르타르
Epoxy resin mortar for restoration in concrete structure

콘크리트용 에폭시 수지계 방수ㆍ방식재
Epoxy resin material for waterproof and anticorrosion of concrete structure

콘크리트 구조물 보수용 에폭시 수지 모르타르
Epoxy resin mortar for restoration in concrete structure

콘크리트용 에폭시 수지계 방수ㆍ방식재
Epoxy resin material for waterproof and anticorrosion of concrete structure

콘크리트용 에폭시 수지계 방수·방식도료 도포방법 시공표준
Standard coating method of epoxy resin paints for waterproof and anticorrosion of concretes structures

Paints for steel structures, Part 10: Full gloss epoxy (two-pack)
Paints for steel structures, Part 10: Full gloss epoxy (two-pack)

Plastic Molding Compound, Novolac Epoxy Resin, Short Glass Fiber Reinforced, Structural
Plastic Molding Compound, Novolac Epoxy Resin, Short Glass Fiber Reinforced, Structural

Paints for steel structures, Part 14: High-build epoxy (two-pack)
Paints for steel structures, Part 14: High-build epoxy (two-pack)

ADHESIVE, EPOXY RESIN, STRUCTURAL BONDING (NO S/S DOCUMENT)
ADHESIVE, EPOXY RESIN, STRUCTURAL BONDING (NO S/S DOCUMENT)

ADHESIVE, EPOXY RESIN, STRUCTURAL BONDING, NON-ASBESTOS (NO S/S DOCUMENT)
ADHESIVE, EPOXY RESIN, STRUCTURAL BONDING, NON-ASBESTOS (NO S/S DOCUMENT)

Plastic Molding Compound, Epi-Bis Epoxy, Glass Fiber Reinforced, Structural
Plastic Molding Compound, Epi-Bis Epoxy, Glass Fiber Reinforced, Structural

Standard Test Method for Flow Rates for Poly(Vinyl Chloride) with Molecular Structural Implications
Standard Test Method for Flow Rates for Poly(Vinyl Chloride) with Molecular Structural Implications

ADHESIVES, EPROXY RESIN, METAL TO METAL STRUCTURAL BONDING (SUPERSEDING QPL-MMM-A-134-10)
ADHESIVES, EPROXY RESIN, METAL TO METAL STRUCTURAL BONDING (SUPERSEDING QPL-MMM-A-134-10)

四圆单晶X射线衍射仪测定小分子化合物的晶体及分子结构分析方法通则
General rules for crystal and molecular structure determination of small molecules by four-circle single crystal X-ray diffractometer

Paints for steel structures, Part 10: Full gloss epoxy (two-pack)
Paints for steel structures, Part 10: Full gloss epoxy (two-pack)