树脂强5检测标准，树脂强5检测标准标准内容,检测中心-北检（北京）检测技术研究院

GB/T 15022.5-2011

电气绝缘用树脂基活性复合物第5部分：石英填料环氧树脂复合物
Resin based reactive compounds used for electrical insulation - Part 5：Quartz filled epoxy resinous compounds

【发布单位或类别】 CN-GB国家标准
【发布日期】2011-12-30
【CCS分类】K15电工绝缘材料及其制品
【ICS分类】29.035.99其他绝缘材料

GB/T 1303.5-2017

电气用热固性树脂工业硬质层压板第5部分：三聚氰胺树脂硬质层压板
Industrial rigid laminated sheets based on thermosetting resins for electrical purposes—Part 5: Requirements for rigid laminated sheets based on melamine resins

【发布单位或类别】 CN-GB国家标准
【发布日期】2017-09-29
【CCS分类】K15电工绝缘材料及其制品
【ICS分类】29.035.99其他绝缘材料

GB/T 5019.8-2009

以云母为基的绝缘材料第8部分：玻璃布补强B阶环氧树脂粘合云母带
Specification for insulating materials based on mica - Part 8: Glass-backed mica paper with a B-stage epoxy resin binder

【发布单位或类别】 CN-GB国家标准
【发布日期】2009-06-10
【CCS分类】K15电工绝缘材料及其制品
【ICS分类】29.035.99其他绝缘材料

GB/T 5019.6-2007

以云母为基的绝缘材料第6部分: 聚酯薄膜补强B阶环氧树脂粘合云母带
Specification for insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 4: Polyester film-backed mica paper with a B-stage epoxy resin binder

【发布单位或类别】 CN-GB国家标准
【发布日期】2007-12-03
【CCS分类】K15电工绝缘材料及其制品
【ICS分类】29.035.99其他绝缘材料

GB/T 32788.5-2016

预浸料性能试验方法第5部分：树脂含量的测定
Test method for properties of prepreg—Part 5: Determination of resin content

【发布单位或类别】 CN-GB国家标准
【发布日期】2016-06-14
【CCS分类】Q23纤维增强复合材料
【ICS分类】83.120增强塑料

GB/T 5019.7-2009

以云母为基的绝缘材料第7部分：真空压力浸渍（VPI）用玻璃布及薄膜补强环氧树脂粘合云母带
Insulating materials based on mica - Part 7: Glass-backed and film-backed mica paper with an epoxy resin binder for vacuum pressure impregnation(VPI)

【发布单位或类别】 CN-GB国家标准
【发布日期】2009-06-10
【CCS分类】K15电工绝缘材料及其制品
【ICS分类】29.035.99其他绝缘材料

BS PL 5:2005

Unsaturated polyester resins for low pressure laminating of high strength fibre reinforced composites. Test methods
Unsaturated polyester resins for low pressure laminating of high strength fibre reinforced composites. Test methods

【发布单位或类别】 GB-BSI英国标准学会
【发布日期】2005-06-10
【CCS分类】电工绝缘材料及其制品
【ICS分类】其他绝缘材料

GB/T 5132.5-2009

电气用热固性树脂工业硬质圆形层压管和棒第5部分：圆形层压模制棒
Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 5: Round laminated moulded rods

【发布单位或类别】 CN-GB国家标准
【发布日期】2009-06-10
【CCS分类】K15气象学
【ICS分类】29.035.99地质学、气象学、水文学

DB50/T 1125.5-2021

区域性气象灾害过程评估规范第5部分：强降温

【发布单位或类别】 CN-DB50重庆市地方标准
【发布日期】2021-09-10
【CCS分类】A47石油工程
【ICS分类】07.060固定容器和罐

ASTM D3299-24

Standard Specification for Filament-Wound Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks
Standard Specification for Filament-Wound Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks

【发布单位或类别】 US-ASTM美国材料与试验协会
【发布日期】2024-12-01
【CCS分类】
【ICS分类】23.020.10固定容器和罐

ASTM D4097-19

Standard Specification for Contact-Molded Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks
Standard Specification for Contact-Molded Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks

【发布单位或类别】 US-ASTM美国材料与试验协会
【发布日期】2019-08-01
【CCS分类】
【ICS分类】23.020.10机器和设备的噪声

ASTM E1067/E1067M-18

Standard Practice for Acoustic Emission Examination of Fiberglass Reinforced Plastic Resin (FRP) Tanks/Vessels
Standard Practice for Acoustic Emission Examination of Fiberglass Reinforced Plastic Resin (FRP) Tanks/Vessels

【发布单位或类别】 US-ASTM美国材料与试验协会
【发布日期】2018-02-01
【CCS分类】
【ICS分类】17.140.20热塑性塑料

T/QGCML 1649-2023

液体C5增粘石油树脂

【发布单位或类别】 CN-TUANTI团体标准
【发布日期】2023-10-10
【CCS分类】
【ICS分类】83.080.20石油及相关技术综合

DIN 16965-5

Wound glass fibre reinforced polyester resin (UP-GF); pipes, Type E pipes, dimensions
Wound glass fibre reinforced polyester resin (UP-GF); pipes, Type E pipes, dimensions

【发布单位或类别】 DE-DIN德国标准化学会
【发布日期】1982-07-01
【CCS分类】
【ICS分类】

DIN 16966-5

Glass fibre reinforced polyester resin (UP-GF) pipe fittings and joints; Reducers, Dimensions
Glass fibre reinforced polyester resin (UP-GF) pipe fittings and joints; Reducers, Dimensions

【发布单位或类别】 DE-DIN德国标准化学会
【发布日期】1982-07-01
【CCS分类】
【ICS分类】

SAE AMS3671C

Plastic Molding Compound, Novolac Epoxy Resin, Short Glass Fiber Reinforced, Structural
Plastic Molding Compound, Novolac Epoxy Resin, Short Glass Fiber Reinforced, Structural

【发布单位或类别】 US-SAE美国机动车工程师协会
【发布日期】1996-10-01
【CCS分类】
【ICS分类】

UNE-EN 1636-5:1998

PLASTICS PIPING SYSTEMS FOR NON-PRESSURE DRAINAGE AND SEWERAGE. GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) BASED ON UNSATURATED POLYESTER RESIN (UP). PART 5: FITNESS FOR PURPOSE OF THE JOINTS.
PLASTICS PIPING SYSTEMS FOR NON-PRESSURE DRAINAGE AND SEWERAGE. GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) BASED ON UNSATURATED POLYESTER RESIN (UP). PART 5: FITNESS FOR PURPOSE OF THE JOINTS.

【发布单位或类别】 ES-UNE西班牙标准
【发布日期】1998-05-25
【CCS分类】
【ICS分类】

HB 7736.5-2004

复合材料预浸料物理性能试验方法第5部分:树脂含量的测定
Test method for physical properties of composite material prepreg Part 5:Determination of resin content

【发布单位或类别】 CN-HB行业标准-航空
【发布日期】2004-02-16
【CCS分类】
【ICS分类】

SY/T 6770.5-2016

非金属管材质量验收规范第5部分：纤维曾强热塑性塑料复合连续管

【发布单位或类别】 CN-SY行业标准-石油
【发布日期】2016-12-05
【CCS分类】P71
【ICS分类】75.010

SAE AMS3672C

Plastic Molding Compound, Epi-Bis Epoxy, Glass Fiber Reinforced, Structural
Plastic Molding Compound, Epi-Bis Epoxy, Glass Fiber Reinforced, Structural

【发布单位或类别】 US-SAE美国机动车工程师协会
【发布日期】1995-10-01
【CCS分类】
【ICS分类】

树脂强5检测标准

电气绝缘用树脂基活性复合物 第5部分：石英填料环氧树脂复合物 Resin based reactive compounds used for electrical insulation - Part 5：Quartz filled epoxy resinous compounds

电气用热固性树脂工业硬质层压板 第5部分：三聚氰胺树脂硬质层压板 Industrial rigid laminated sheets based on thermosetting resins for electrical purposes—Part 5: Requirements for rigid laminated sheets based on melamine resins

以云母为基的绝缘材料 第8部分：玻璃布补强B阶环氧树脂粘合云母带 Specification for insulating materials based on mica - Part 8: Glass-backed mica paper with a B-stage epoxy resin binder

以云母为基的绝缘材料 第6部分: 聚酯薄膜补强B阶环氧树脂粘合云母带 Specification for insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 4: Polyester film-backed mica paper with a B-stage epoxy resin binder

预浸料性能试验方法 第5部分：树脂含量的测定 Test method for properties of prepreg—Part 5: Determination of resin content

以云母为基的绝缘材料 第7部分：真空压力浸渍（VPI）用玻璃布及薄膜补强环氧树脂粘合云母带 Insulating materials based on mica - Part 7: Glass-backed and film-backed mica paper with an epoxy resin binder for vacuum pressure impregnation(VPI)

Unsaturated polyester resins for low pressure laminating of high strength fibre reinforced composites. Test methods Unsaturated polyester resins for low pressure laminating of high strength fibre reinforced composites. Test methods

电气用热固性树脂工业硬质圆形层压管和棒 第5部分：圆形层压模制棒 Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 5: Round laminated moulded rods

区域性气象灾害过程评估规范 第5部分：强降温

Standard Specification for Filament-Wound Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks Standard Specification for Filament-Wound Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks

Standard Specification for Contact-Molded Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks Standard Specification for Contact-Molded Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks

Standard Practice for Acoustic Emission Examination of Fiberglass Reinforced Plastic Resin (FRP) Tanks/Vessels Standard Practice for Acoustic Emission Examination of Fiberglass Reinforced Plastic Resin (FRP) Tanks/Vessels