吸水树脂线检测标准，吸水树脂线检测标准标准内容,检测中心-北检（北京）检测技术研究院

GB/T 44422-2024

尿吸收辅助器具中的聚丙烯酸吸水树脂要求
Water-absorbent polyacrylate in urine absorbing products—Requirements

【发布单位或类别】 CN-GB国家标准
【发布日期】2024-08-23
【CCS分类】C45体外循环、人工脏器、假体装置
【ICS分类】11.180.20造口术和失禁用设备

JC/T 2551-2019

混凝土高吸水性树脂内养护剂

【发布单位或类别】 CN-JC行业标准-建材
【发布日期】2019-12-24
【CCS分类】Q12水泥混合材与外加剂
【ICS分类】91.100.30混凝土和混凝土制品

T/ZZB 0858-2018

球形吸水树脂

【发布单位或类别】 CN-TUANTI团体标准
【发布日期】2018-12-14
【CCS分类】Y39其他纸
【ICS分类】85.080纸制品

KS K 0434-2022

코드의 수분 흡수율 시험방법
Test method for water absorption of cord

【发布单位或类别】 KR-KS韩国标准
【发布日期】2022-08-24
【CCS分类】电工材料和通用零件
【ICS分类】59.080.50绳

BS ISO 19699-2:2017

Superabsorbent polymer. Sodium polyacrylate resin for absorbing blood-Specifications
Superabsorbent polymer. Sodium polyacrylate resin for absorbing blood-Specifications

【发布单位或类别】 GB-BSI英国标准学会
【发布日期】2017-09-13
【CCS分类】电工材料和通用零件
【ICS分类】涂料和清漆

BS ISO 19699-1:2017

Superabsorbent polymer. Sodium polyacrylate resin for absorbing blood-Test methods
Superabsorbent polymer. Sodium polyacrylate resin for absorbing blood-Test methods

【发布单位或类别】 GB-BSI英国标准学会
【发布日期】2017-09-30
【CCS分类】带绝缘层电线
【ICS分类】插头、插座、连接器

KS M 5332-2006

강선 외판용 염화비닐 수지 도료
Vinyl chloride resin coating for outside plating of steel ship

【发布单位或类别】 KR-KS韩国标准
【发布日期】2006-10-02
【CCS分类】
【ICS分类】87.040电线

KS C 8453-1989(2009)

옥내 배선용 합성수지 선통
Plastic Surface Raceways for Interior Wiring

【发布单位或类别】 KR-KS韩国标准
【发布日期】1989-07-22
【CCS分类】
【ICS分类】29.120.30电线

MIL MIL-I-3158D Notice 1-Validation 1

INSULATION TAPE, ELECTRICAL GLASS-FIBER (RESIN-FILLED): AND CORD, FIBROUS-GLASS
INSULATION TAPE, ELECTRICAL GLASS-FIBER (RESIN-FILLED): AND CORD, FIBROUS-GLASS

【发布单位或类别】 US-MIL美国军事规范和标准
【发布日期】1988-10-28
【CCS分类】
【ICS分类】电线

BS EN 60317-49:2012

Specifications for particular types of winding wires-Glass-fibre wound high temperature resin or varnish impregnated, bare or enamelled round copper wire, temperature index 180
Specifications for particular types of winding wires-Glass-fibre wound high temperature resin or varnish impregnated, bare or enamelled round copper wire, temperature index 180

【发布单位或类别】 GB-BSI英国标准学会
【发布日期】2013-04-30
【CCS分类】
【ICS分类】电线

IEC 60317-48:2012

Specifications for particular types of winding wires - Part 48: Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire, temperature index 155
Specifications for particular types of winding wires - Part 48: Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire, temperature index 155

【发布单位或类别】 IX-IEC国际电工委员会
【发布日期】2012-07-09
【CCS分类】
【ICS分类】29.060.10电线

IEC 60317-0-6:2020

Specifications for particular types of winding wires - Part 0-6: General requirements - Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire
Specifications for particular types of winding wires - Part 0-6: General requirements - Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire

【发布单位或类别】 IX-IEC国际电工委员会
【发布日期】2020-06-09
【CCS分类】
【ICS分类】29.060.10电线

IEC 60317-31:2015

Specifications for particular types of winding wires - Part 31: Glass fibre wound, resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 180
Specifications for particular types of winding wires - Part 31: Glass fibre wound, resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 180

【发布单位或类别】 IX-IEC国际电工委员会
【发布日期】2015-10-22
【CCS分类】
【ICS分类】29.060.10

\u0413\u041e\u0421\u0422 \u0420 \u041c\u042d\u041a 60317-0-6-2013

Технические условия на обмоточные провода конкретных типов. Часть 0-6. Общие требования. Провода медные круглые со стекловолокнистой или эмалево-стекловолокнистой изоляцией, пропитанной компаундом или лаком
Specifications for particular types of winding wires. Part 0-6. General requirements. Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire

【发布单位或类别】 RU-GOST俄罗斯国家标准
【发布日期】
【CCS分类】K10/19
【ICS分类】29.060.10

\u0413\u041e\u0421\u0422 \u0420 \u041c\u042d\u041a 60317-0-4-2013

Технические условия на обмоточные провода конкретных типов. Часть 0-4. Общие требования. Провода медные прямоугольные со стекловолокнистой или эмалево-стекловолокнистой изоляцией, пропитанной компаундом или лаком
Specifications for particular types of winding wires. Part 0-4. General requirements. Glass-fibre wound resin or varnish impregnated, bare or enamelled rectangular copper wire

【发布单位或类别】 RU-GOST俄罗斯国家标准
【发布日期】
【CCS分类】K10/19
【ICS分类】29.060.10

\u0413\u041e\u0421\u0422 \u0420 \u041c\u042d\u041a 60317-0-8-2017

Технические условия на обмоточные провода конкретных типов. Часть 0-8. Общие требования. Провод прямоугольный медный с эмалевой изоляцией или без нее, с полиэфирной стекловолокнистой оплеткой, пропитанной или не пропитанной компаундом или лаком
Specifications for particular types of winding wires. Part 0-8. General requirements. Polyester glass fibre wound, resin or varnish impregnated or not impregnated, bare or enamelled rectangular copper wire

【发布单位或类别】 RU-GOST俄罗斯国家标准
【发布日期】
【CCS分类】K12
【ICS分类】29.060.10

UNE-EN 60317-39/A1:1999

SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES. PARTE 39: GLASS-FIBRE BRAIDED RESIN OR VARNISH IMPREGNATED, BARE OR ENAMELLED RECTANGULAR COPPER WIRE, TEMPERATURE INDEX 180.
SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES. PARTE 39: GLASS-FIBRE BRAIDED RESIN OR VARNISH IMPREGNATED, BARE OR ENAMELLED RECTANGULAR COPPER WIRE, TEMPERATURE INDEX 180.

【发布单位或类别】 ES-UNE西班牙标准
【发布日期】1999-07-23
【CCS分类】
【ICS分类】

UNE-EN 60317-32/A1:1999

SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES. PART 32: GLASS-FIBRE WOUND RESIN OR VARNISH IMPREGNATED, BARE OR ENAMELLED RECTANGULAR COPPER WIRE, TEMPERATURE INDEX 155
SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES. PART 32: GLASS-FIBRE WOUND RESIN OR VARNISH IMPREGNATED, BARE OR ENAMELLED RECTANGULAR COPPER WIRE, TEMPERATURE INDEX 155

【发布单位或类别】 ES-UNE西班牙标准
【发布日期】1999-06-28
【CCS分类】
【ICS分类】

UNE-EN 60317-31/A1:1998

SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES. PART 31: GLASS-FIBRE WOUND RESIN OR VARNISH IMPREGNATED, BARE OR ENAMELLED RECTANGULAR COPPER WIRE, TEMPERATURE INDEX 180.
SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES. PART 31: GLASS-FIBRE WOUND RESIN OR VARNISH IMPREGNATED, BARE OR ENAMELLED RECTANGULAR COPPER WIRE, TEMPERATURE INDEX 180.

【发布单位或类别】 ES-UNE西班牙标准
【发布日期】1998-09-23
【CCS分类】
【ICS分类】

UNE-EN 60317-40/A1:1999

SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES. PART 40: GLASS-FIBRE BRAIDED RESIN OR VARNISH IMPREGNATED, BARE OR ENAMELLED RECTANGULAR COPPER WIRE, TEMPERATURE INDEX 200.
SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES. PART 40: GLASS-FIBRE BRAIDED RESIN OR VARNISH IMPREGNATED, BARE OR ENAMELLED RECTANGULAR COPPER WIRE, TEMPERATURE INDEX 200.

【发布单位或类别】 ES-UNE西班牙标准
【发布日期】1999-07-23
【CCS分类】
【ICS分类】

吸水树脂线检测标准

尿吸收辅助器具中的聚丙烯酸吸水树脂 要求 Water-absorbent polyacrylate in urine absorbing products—Requirements

混凝土高吸水性树脂内养护剂

球形吸水树脂

코드의 수분 흡수율 시험방법 Test method for water absorption of cord

Superabsorbent polymer. Sodium polyacrylate resin for absorbing blood-Specifications Superabsorbent polymer. Sodium polyacrylate resin for absorbing blood-Specifications

Superabsorbent polymer. Sodium polyacrylate resin for absorbing blood-Test methods Superabsorbent polymer. Sodium polyacrylate resin for absorbing blood-Test methods

강선 외판용 염화비닐 수지 도료 Vinyl chloride resin coating for outside plating of steel ship

옥내 배선용 합성수지 선통 Plastic Surface Raceways for Interior Wiring

INSULATION TAPE, ELECTRICAL GLASS-FIBER (RESIN-FILLED): AND CORD, FIBROUS-GLASS INSULATION TAPE, ELECTRICAL GLASS-FIBER (RESIN-FILLED): AND CORD, FIBROUS-GLASS

北检院部分仪器展示