树脂和树脂天青检测标准，树脂和树脂天青检测标准标准内容,检测中心-北检（北京）检测技术研究院

GB/T 1630.2-2023

塑料环氧树脂第2部分:试样制备和交联环氧树脂的性能测定
Plastics—Epoxy resins—Part 2: Preparation of test specimens and determination of properties of crosslinked epoxy resins

【发布单位或类别】 CN-GB国家标准
【发布日期】2023-09-07
【CCS分类】G32合成树脂、塑料
【ICS分类】83.080.10热固性塑料

HG/T 5860\uff5e5861-2021

绿色设计产品评价技术规范聚氯乙烯树脂和氯化聚氯乙烯树脂（2021）

【发布单位或类别】 CN-HG行业标准-化工
【发布日期】
【CCS分类】磨料与磨具
【ICS分类】磨料磨具

JB/T 6353-2015

固结磨具树脂和橡胶薄片砂轮

【发布单位或类别】 CN-JB行业标准-机械
【发布日期】2015-10-10
【CCS分类】J43标志、包装、运输、贮存
【ICS分类】25.100.70与食品接触的物品与材料

SN/T 2813-2011

出口食品接触材料高分子材料三聚氰胺-甲醛树脂、尼龙树脂和聚碳酸酯树脂中提取物的测定
Food contact materials for export-Polymers-Determination of the extractives from the articles of melamine-formaldehyde,nylon and polycarbonate

【发布单位或类别】 CN-SN行业标准-商品检验
【发布日期】2011-02-25
【CCS分类】X08矫形外科、骨科器械
【ICS分类】67.250外科植入物、假体和矫形

YY/T 0510-2009

外科植入物用无定形聚丙交酯树脂和丙交酯-乙交酯共聚树脂

【发布单位或类别】 CN-YY行业标准-医药
【发布日期】2009-12-30
【CCS分类】C35磨料与磨具
【ICS分类】11.040.40热固性塑料

KS M ISO 11402-2006(2022)

페놀계, 아민계 및 축합 수지－유리 포름알데히드 함량 측정
Phenolic amino and condensation resins－Determination of free－formaldehyde content

【发布单位或类别】 KR-KS韩国标准
【发布日期】2006-03-31
【CCS分类】磨料与磨具
【ICS分类】83.080.10热固性塑料

KS M ISO 11402-2006(2017)

페놀계, 아민계 및 축합 수지－유리 포름알데히드 함량 측정
Phenolic amino and condensation resins－Determination of free－formaldehyde content

【发布单位或类别】 KR-KS韩国标准
【发布日期】2006-03-31
【CCS分类】合成树脂、塑料
【ICS分类】83.080.10塑料综合

20231350-T-606

塑料酚醛树脂分类和试验方法
Plastics-Phenolic resins-classification and test methods

【发布单位或类别】 CN-PLAN国家标准计划
【发布日期】2023-12-01
【CCS分类】
【ICS分类】83.080.01磨料磨具

JIS K 6941:2019

UV curable resin and thermosetting resin -- Continuous measurement method of shrinkage rate
UV curable resin and thermosetting resin -- Continuous measurement method of shrinkage rate

【发布单位或类别】 JP-JSA日本工业标准调查会
【发布日期】2019-01-01
【CCS分类】
【ICS分类】非金属矿

NAS 47 Rev.3

Spacer, Sleeve, Nonmetallic, Epoxy and Phenolic, Screw and Bolt
Spacer, Sleeve, Nonmetallic, Epoxy and Phenolic, Screw and Bolt

【发布单位或类别】 US-NAS航空航天工业协会 - 国家航空航天标准
【发布日期】2014-06-30
【CCS分类】
【ICS分类】热固性塑料

MIL MIL-DTL-47113E Notice 1-Validation 1

Compound, Heat Sink, Silicone and/or Non-Silicone
Compound, Heat Sink, Silicone and/or Non-Silicone

【发布单位或类别】 US-MIL美国军事规范和标准
【发布日期】2017-05-10
【CCS分类】
【ICS分类】橡胶和塑料制品

BS ISO 4216:2021

Thermosetting resin and UV curable resin. Determination of shrinkage by continuous measurement method
Thermosetting resin and UV curable resin. Determination of shrinkage by continuous measurement method

【发布单位或类别】 GB-BSI英国标准学会
【发布日期】2021-05-10
【CCS分类】
【ICS分类】热塑性塑料

JB/T 6353-2006

固结磨具树脂和橡胶薄片砂轮
Bonded abrasive products-Resinoid and rubber bond flat grinding wheel

【发布单位或类别】 CN-JB行业标准-机械
【发布日期】2006-11-27
【CCS分类】J43
【ICS分类】25.100.70

MIL MIL-DTL-47113E

Compound, Heat Sink, Silicone and/or Non-Silicone
Compound, Heat Sink, Silicone and/or Non-Silicone

【发布单位或类别】 US-MIL美国军事规范和标准
【发布日期】2012-05-15
【CCS分类】
【ICS分类】

ASM P-32

TACTIX 740 and TACTIX 741 RESINS - High Temperature Composite and Adhesive Resins
TACTIX 740 and TACTIX 741 RESINS - High Temperature Composite and Adhesive Resins

【发布单位或类别】 AU-SA澳大利亚标准协会
【发布日期】1991-12-01
【CCS分类】
【ICS分类】

JB/T 6353-1992

树脂和橡胶薄片砂轮

【发布单位或类别】 CN-JB行业标准-机械
【发布日期】1992-07-01
【CCS分类】J43
【ICS分类】73.080

ISO 4216:2021

Thermosetting resin and UV curable resin — Determination of shrinkage by continuous measurement method
Thermosetting resin and UV curable resin — Determination of shrinkage by continuous measurement method

【发布单位或类别】 IX-ISO国际标准化组织
【发布日期】2021-04-22
【CCS分类】
【ICS分类】83.080.10

SAE AMS2980/4B

Technical Specification: Carbon Fiber Fabric and Epoxy Resin Wet Lay-Up Repair Material Purchasing Specification - Resin
Technical Specification: Carbon Fiber Fabric and Epoxy Resin Wet Lay-Up Repair Material Purchasing Specification - Resin

【发布单位或类别】 US-SAE美国机动车工程师协会
【发布日期】2014-04-03
【CCS分类】
【ICS分类】

\u0413\u041e\u0421\u0422 18329-2014

Смолы и пластификаторы жидкие. Методы определения плотности
Liquid resins and plasticizers. Methods for determination of dеnsity

【发布单位或类别】 RU-GOST俄罗斯国家标准
【发布日期】2014-12-04
【CCS分类】G32
【ICS分类】83.140

ASTM D6493-11(2022)

Standard Test Methods for Softening Point of Hydrocarbon Resins and Rosin Based Resins by Automated Ring-and-Ball Apparatus
Standard Test Methods for Softening Point of Hydrocarbon Resins and Rosin Based Resins by Automated Ring-and-Ball Apparatus

【发布单位或类别】 US-ASTM美国材料与试验协会
【发布日期】2022-12-01
【CCS分类】
【ICS分类】83.080.20

树脂和树脂天青检测标准

塑料 环氧树脂 第2部分:试样制备和交联环氧树脂的性能测定 Plastics—Epoxy resins—Part 2: Preparation of test specimens and determination of properties of crosslinked epoxy resins

绿色设计产品评价技术规范 聚氯乙烯树脂和氯化聚氯乙烯树脂（2021）

固结磨具 树脂和橡胶薄片砂轮

出口食品接触材料 高分子材料 三聚氰胺-甲醛树脂、尼龙树脂和聚碳酸酯树脂中提取物的测定 Food contact materials for export-Polymers-Determination of the extractives from the articles of melamine-formaldehyde,nylon and polycarbonate

外科植入物用无定形聚丙交酯树脂和丙交酯-乙交酯共聚树脂

페놀계, 아민계 및 축합 수지－유리 포름알데히드 함량 측정 Phenolic amino and condensation resins－Determination of free－formaldehyde content

페놀계, 아민계 및 축합 수지－유리 포름알데히드 함량 측정 Phenolic amino and condensation resins－Determination of free－formaldehyde content

塑料 酚醛树脂 分类和试验方法 Plastics-Phenolic resins-classification and test methods

UV curable resin and thermosetting resin -- Continuous measurement method of shrinkage rate UV curable resin and thermosetting resin -- Continuous measurement method of shrinkage rate

Spacer, Sleeve, Nonmetallic, Epoxy and Phenolic, Screw and Bolt Spacer, Sleeve, Nonmetallic, Epoxy and Phenolic, Screw and Bolt

Compound, Heat Sink, Silicone and/or Non-Silicone Compound, Heat Sink, Silicone and/or Non-Silicone

Thermosetting resin and UV curable resin. Determination of shrinkage by continuous measurement method Thermosetting resin and UV curable resin. Determination of shrinkage by continuous measurement method

固结磨具 树脂和橡胶薄片砂轮 Bonded abrasive products-Resinoid and rubber bond flat grinding wheel

Compound, Heat Sink, Silicone and/or Non-Silicone Compound, Heat Sink, Silicone and/or Non-Silicone

TACTIX 740 and TACTIX 741 RESINS - High Temperature Composite and Adhesive Resins TACTIX 740 and TACTIX 741 RESINS - High Temperature Composite and Adhesive Resins

树脂和橡胶薄片砂轮

Thermosetting resin and UV curable resin — Determination of shrinkage by continuous measurement method Thermosetting resin and UV curable resin — Determination of shrinkage by continuous measurement method

Technical Specification: Carbon Fiber Fabric and Epoxy Resin Wet Lay-Up Repair Material Purchasing Specification - Resin Technical Specification: Carbon Fiber Fabric and Epoxy Resin Wet Lay-Up Repair Material Purchasing Specification - Resin

Смолы и пластификаторы жидкие. Методы определения плотности Liquid resins and plasticizers. Methods for determination of dеnsity

Standard Test Methods for Softening Point of Hydrocarbon Resins and Rosin Based Resins by Automated Ring-and-Ball Apparatus Standard Test Methods for Softening Point of Hydrocarbon Resins and Rosin Based Resins by Automated Ring-and-Ball Apparatus

北检院部分仪器展示

塑料环氧树脂第2部分:试样制备和交联环氧树脂的性能测定
Plastics—Epoxy resins—Part 2: Preparation of test specimens and determination of properties of crosslinked epoxy resins

绿色设计产品评价技术规范聚氯乙烯树脂和氯化聚氯乙烯树脂（2021）

固结磨具树脂和橡胶薄片砂轮

出口食品接触材料高分子材料三聚氰胺-甲醛树脂、尼龙树脂和聚碳酸酯树脂中提取物的测定
Food contact materials for export-Polymers-Determination of the extractives from the articles of melamine-formaldehyde,nylon and polycarbonate

페놀계, 아민계 및 축합 수지－유리 포름알데히드 함량 측정
Phenolic amino and condensation resins－Determination of free－formaldehyde content

페놀계, 아민계 및 축합 수지－유리 포름알데히드 함량 측정
Phenolic amino and condensation resins－Determination of free－formaldehyde content

塑料酚醛树脂分类和试验方法
Plastics-Phenolic resins-classification and test methods

UV curable resin and thermosetting resin -- Continuous measurement method of shrinkage rate
UV curable resin and thermosetting resin -- Continuous measurement method of shrinkage rate

Spacer, Sleeve, Nonmetallic, Epoxy and Phenolic, Screw and Bolt
Spacer, Sleeve, Nonmetallic, Epoxy and Phenolic, Screw and Bolt

Compound, Heat Sink, Silicone and/or Non-Silicone
Compound, Heat Sink, Silicone and/or Non-Silicone

Thermosetting resin and UV curable resin. Determination of shrinkage by continuous measurement method
Thermosetting resin and UV curable resin. Determination of shrinkage by continuous measurement method

固结磨具树脂和橡胶薄片砂轮
Bonded abrasive products-Resinoid and rubber bond flat grinding wheel

Compound, Heat Sink, Silicone and/or Non-Silicone
Compound, Heat Sink, Silicone and/or Non-Silicone

TACTIX 740 and TACTIX 741 RESINS - High Temperature Composite and Adhesive Resins
TACTIX 740 and TACTIX 741 RESINS - High Temperature Composite and Adhesive Resins

Thermosetting resin and UV curable resin — Determination of shrinkage by continuous measurement method
Thermosetting resin and UV curable resin — Determination of shrinkage by continuous measurement method

Technical Specification: Carbon Fiber Fabric and Epoxy Resin Wet Lay-Up Repair Material Purchasing Specification - Resin
Technical Specification: Carbon Fiber Fabric and Epoxy Resin Wet Lay-Up Repair Material Purchasing Specification - Resin

Смолы и пластификаторы жидкие. Методы определения плотности
Liquid resins and plasticizers. Methods for determination of dеnsity

Standard Test Methods for Softening Point of Hydrocarbon Resins and Rosin Based Resins by Automated Ring-and-Ball Apparatus
Standard Test Methods for Softening Point of Hydrocarbon Resins and Rosin Based Resins by Automated Ring-and-Ball Apparatus