c7a树脂是什么树脂检测标准，c7a树脂是什么树脂检测标准标准内容,检测中心-北检（北京）检测技术研究院

GB/T 15022.7-2017

电气绝缘用树脂基活性复合物第7部分：环氧酸酐真空压力浸渍（VPI）树脂
Resin based reactive compounds used for electrical insulation—Part 7: Epoxy-anhydride vacuum pressure impregnation(VPI) resin

【发布单位或类别】 CN-GB国家标准
【发布日期】2017-11-01
【CCS分类】K15电工绝缘材料及其制品
【ICS分类】29.035.99其他绝缘材料

GB/T 1303.7-2009

电气用热固性树脂工业硬质层压板第7部分：聚酯树脂硬质层压板
Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 7: Requirements for rigid laminated sheets based on polyester resins

【发布单位或类别】 CN-GB国家标准
【发布日期】2009-06-10
【CCS分类】K15电工绝缘材料及其制品
【ICS分类】29.035.01绝缘材料综合

GB/T 38537-2020

纤维增强树脂基复合材料超声检测方法 C扫描法
Ultrasonic testing method for fiber reinforced resin matrix composites—C-scan method

【发布单位或类别】 CN-GB国家标准
【发布日期】2020-03-06
【CCS分类】Q23纤维增强复合材料
【ICS分类】83.120增强塑料

GB/T 13660-2008

201×7 强碱性苯乙烯系阴离子交换树脂
201×7 Strong base polystyrene anion exchange resin

【发布单位或类别】 CN-GB国家标准
【发布日期】2008-06-30
【CCS分类】G32合成树脂、塑料
【ICS分类】83.080.01塑料综合

GB/T 13659-2008

001×7 强酸性苯乙烯系阳离子交换树脂
001×7 Strong acid polystyrene cation exchange resin

【发布单位或类别】 CN-GB国家标准
【发布日期】2008-06-30
【CCS分类】G32合成树脂、塑料
【ICS分类】83.080.01塑料综合

GB/T 27797.7-2011

纤维增强塑料试验板制备方法第7部分：树脂传递模塑
Fibre-reinforced plastics - Methods of producing test plates - Part 7: Resin transfer moulding

【发布单位或类别】 CN-GB国家标准
【发布日期】2011-12-30
【CCS分类】Q23纤维增强复合材料
【ICS分类】83.120增强塑料

SH 2605.06-2003

201×7强碱性苯乙烯系阴离子交换树脂
201×7 Strongly basic styrene type anion exchange resins

【发布单位或类别】 CN-SH行业标准-石油化工
【发布日期】2003-11-29
【CCS分类】G31合成树脂、塑料基础标准与通用方法
【ICS分类】83.080塑料

SH 2605.01-2003

001×7强酸性苯乙烯系阳离子交换树脂
001×7 Strongly acidic styrene type cation exchange resins

【发布单位或类别】 CN-SH行业标准-石油化工
【发布日期】2003-11-29
【CCS分类】G31合成树脂、塑料基础标准与通用方法
【ICS分类】83.080塑料

MIL MIL-DTL-15098/11D

Lamps, Glow, Indicator, Types C7A, C9A, A1G, and A1H
Lamps, Glow, Indicator, Types C7A, C9A, A1G, and A1H

【发布单位或类别】 US-MIL美国军事规范和标准
【发布日期】2020-07-28
【CCS分类】合成树脂、塑料
【ICS分类】热塑性塑料

MIL MIL-DTL-15098/11C Notice 1-Validation 1

Lamps, Glow, Indicator, Types C7A, C9A, A1G, and A1H
Lamps, Glow, Indicator, Types C7A, C9A, A1G, and A1H

【发布单位或类别】 US-MIL美国军事规范和标准
【发布日期】2015-07-14
【CCS分类】合成树脂、塑料
【ICS分类】塑料

T/QGCML 1649-2023

液体C5增粘石油树脂

【发布单位或类别】 CN-TUANTI团体标准
【发布日期】2023-10-10
【CCS分类】
【ICS分类】83.080.20塑料

GB/T 13660-1992

201×7强碱性苯乙烯系阴离子交换树脂
201×7 Strongly basic styrene type anion exchange resins

【发布单位或类别】 CN-GB国家标准
【发布日期】1992-09-01
【CCS分类】G32
【ICS分类】83.080

SAE AMS3135G

Coating Material, Silicone Resin 482 °F (250 °C)
Coating Material, Silicone Resin 482 °F (250 °C)

【发布单位或类别】 US-SAE美国机动车工程师协会
【发布日期】2013-07-22
【CCS分类】
【ICS分类】

GB/T 13659-1992

001×7强酸性苯乙烯系阳离子交换树脂
001×7 Strongly acidic styrene type cation exchange resins

【发布单位或类别】 CN-GB国家标准
【发布日期】1992-09-01
【CCS分类】G32
【ICS分类】83.080

SAE AMS3619E

Resin, Polyimide, Laminating High Temperature Resistant, 315 °C (599 °F)
Resin, Polyimide, Laminating High Temperature Resistant, 315 °C (599 °F)

【发布单位或类别】 US-SAE美国机动车工程师协会
【发布日期】2016-11-16
【CCS分类】
【ICS分类】

SAE AMS3699A

Resin System, Epoxy, Carbon Microballoon Filled, 135 °C (275 °F) Cure
Resin System, Epoxy, Carbon Microballoon Filled, 135 °C (275 °F) Cure

【发布单位或类别】 US-SAE美国机动车工程师协会
【发布日期】1993-01-01
【CCS分类】
【ICS分类】

MIL MIL-L-15098/11B Notice 3-Validation

LAMP, GLOW, INDICATOR, TYPES C7A, C9A, A1G, AND A1H (SUPERSEDING MIL-L-15098/11A)
LAMP, GLOW, INDICATOR, TYPES C7A, C9A, A1G, AND A1H (SUPERSEDING MIL-L-15098/11A)

【发布单位或类别】 US-MIL美国军事规范和标准
【发布日期】2006-09-01
【CCS分类】
【ICS分类】

SAE AMS3684C

Resin, Polyimide, Sealing High-Temperature Resistant, 315 °C (600 °F) Unfilled
Resin, Polyimide, Sealing High-Temperature Resistant, 315 °C (600 °F) Unfilled

【发布单位或类别】 US-SAE美国机动车工程师协会
【发布日期】2016-10-13
【CCS分类】
【ICS分类】

MIL MIL-PRF-85582D Amendment 1

PRIMER COATINGS: EPOXY, WATERBORNE (SUPERSEDING MIL-PRF-85582C)
PRIMER COATINGS: EPOXY, WATERBORNE (SUPERSEDING MIL-PRF-85582C)

【发布单位或类别】 US-MIL美国军事规范和标准
【发布日期】2006-06-09
【CCS分类】
【ICS分类】

MIL MIL-L-15098/11B Notice 2-Validation

LAMP, GLOW, INDICATOR, TYPES C7A, C9A, A1G, AND A1H (SUPERSEDING MIL-L-15098/11A)
LAMP, GLOW, INDICATOR, TYPES C7A, C9A, A1G, AND A1H (SUPERSEDING MIL-L-15098/11A)

【发布单位或类别】 US-MIL美国军事规范和标准
【发布日期】2001-09-20
【CCS分类】
【ICS分类】

c7a树脂是什么树脂检测标准

电气绝缘用树脂基活性复合物 第7部分：环氧酸酐真空压力浸渍（VPI）树脂 Resin based reactive compounds used for electrical insulation—Part 7: Epoxy-anhydride vacuum pressure impregnation(VPI) resin

电气用热固性树脂工业硬质层压板 第7部分：聚酯树脂硬质层压板 Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 7: Requirements for rigid laminated sheets based on polyester resins

纤维增强树脂基复合材料超声检测方法 C扫描法 Ultrasonic testing method for fiber reinforced resin matrix composites—C-scan method

201×7 强碱性苯乙烯系阴离子交换树脂 201×7 Strong base polystyrene anion exchange resin

001×7 强酸性苯乙烯系阳离子交换树脂 001×7 Strong acid polystyrene cation exchange resin

纤维增强塑料 试验板制备方法 第7部分：树脂传递模塑 Fibre-reinforced plastics - Methods of producing test plates - Part 7: Resin transfer moulding

201×7强碱性苯乙烯系阴离子交换树脂 201×7 Strongly basic styrene type anion exchange resins

001×7强酸性苯乙烯系阳离子交换树脂 001×7 Strongly acidic styrene type cation exchange resins

Lamps, Glow, Indicator, Types C7A, C9A, A1G, and A1H Lamps, Glow, Indicator, Types C7A, C9A, A1G, and A1H

Lamps, Glow, Indicator, Types C7A, C9A, A1G, and A1H Lamps, Glow, Indicator, Types C7A, C9A, A1G, and A1H

液体C5增粘石油树脂

201×7强碱性苯乙烯系阴离子交换树脂 201×7 Strongly basic styrene type anion exchange resins

Coating Material, Silicone Resin 482 °F (250 °C) Coating Material, Silicone Resin 482 °F (250 °C)

001×7强酸性苯乙烯系阳离子交换树脂 001×7 Strongly acidic styrene type cation exchange resins

Resin, Polyimide, Laminating High Temperature Resistant, 315 °C (599 °F) Resin, Polyimide, Laminating High Temperature Resistant, 315 °C (599 °F)

Resin System, Epoxy, Carbon Microballoon Filled, 135 °C (275 °F) Cure Resin System, Epoxy, Carbon Microballoon Filled, 135 °C (275 °F) Cure

LAMP, GLOW, INDICATOR, TYPES C7A, C9A, A1G, AND A1H (SUPERSEDING MIL-L-15098/11A) LAMP, GLOW, INDICATOR, TYPES C7A, C9A, A1G, AND A1H (SUPERSEDING MIL-L-15098/11A)

Resin, Polyimide, Sealing High-Temperature Resistant, 315 °C (600 °F) Unfilled Resin, Polyimide, Sealing High-Temperature Resistant, 315 °C (600 °F) Unfilled

PRIMER COATINGS: EPOXY, WATERBORNE (SUPERSEDING MIL-PRF-85582C) PRIMER COATINGS: EPOXY, WATERBORNE (SUPERSEDING MIL-PRF-85582C)

LAMP, GLOW, INDICATOR, TYPES C7A, C9A, A1G, AND A1H (SUPERSEDING MIL-L-15098/11A) LAMP, GLOW, INDICATOR, TYPES C7A, C9A, A1G, AND A1H (SUPERSEDING MIL-L-15098/11A)

北检院部分仪器展示

电气绝缘用树脂基活性复合物第7部分：环氧酸酐真空压力浸渍（VPI）树脂
Resin based reactive compounds used for electrical insulation—Part 7: Epoxy-anhydride vacuum pressure impregnation(VPI) resin

电气用热固性树脂工业硬质层压板第7部分：聚酯树脂硬质层压板
Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 7: Requirements for rigid laminated sheets based on polyester resins

纤维增强树脂基复合材料超声检测方法 C扫描法
Ultrasonic testing method for fiber reinforced resin matrix composites—C-scan method

201×7 强碱性苯乙烯系阴离子交换树脂
201×7 Strong base polystyrene anion exchange resin

001×7 强酸性苯乙烯系阳离子交换树脂
001×7 Strong acid polystyrene cation exchange resin

纤维增强塑料试验板制备方法第7部分：树脂传递模塑
Fibre-reinforced plastics - Methods of producing test plates - Part 7: Resin transfer moulding

201×7强碱性苯乙烯系阴离子交换树脂
201×7 Strongly basic styrene type anion exchange resins

001×7强酸性苯乙烯系阳离子交换树脂
001×7 Strongly acidic styrene type cation exchange resins

Lamps, Glow, Indicator, Types C7A, C9A, A1G, and A1H
Lamps, Glow, Indicator, Types C7A, C9A, A1G, and A1H

Lamps, Glow, Indicator, Types C7A, C9A, A1G, and A1H
Lamps, Glow, Indicator, Types C7A, C9A, A1G, and A1H

201×7强碱性苯乙烯系阴离子交换树脂
201×7 Strongly basic styrene type anion exchange resins

Coating Material, Silicone Resin 482 °F (250 °C)
Coating Material, Silicone Resin 482 °F (250 °C)

001×7强酸性苯乙烯系阳离子交换树脂
001×7 Strongly acidic styrene type cation exchange resins

Resin, Polyimide, Laminating High Temperature Resistant, 315 °C (599 °F)
Resin, Polyimide, Laminating High Temperature Resistant, 315 °C (599 °F)

Resin System, Epoxy, Carbon Microballoon Filled, 135 °C (275 °F) Cure
Resin System, Epoxy, Carbon Microballoon Filled, 135 °C (275 °F) Cure

LAMP, GLOW, INDICATOR, TYPES C7A, C9A, A1G, AND A1H (SUPERSEDING MIL-L-15098/11A)
LAMP, GLOW, INDICATOR, TYPES C7A, C9A, A1G, AND A1H (SUPERSEDING MIL-L-15098/11A)

Resin, Polyimide, Sealing High-Temperature Resistant, 315 °C (600 °F) Unfilled
Resin, Polyimide, Sealing High-Temperature Resistant, 315 °C (600 °F) Unfilled

PRIMER COATINGS: EPOXY, WATERBORNE (SUPERSEDING MIL-PRF-85582C)
PRIMER COATINGS: EPOXY, WATERBORNE (SUPERSEDING MIL-PRF-85582C)

LAMP, GLOW, INDICATOR, TYPES C7A, C9A, A1G, AND A1H (SUPERSEDING MIL-L-15098/11A)
LAMP, GLOW, INDICATOR, TYPES C7A, C9A, A1G, AND A1H (SUPERSEDING MIL-L-15098/11A)