热固性树脂成型检测标准，热固性树脂成型检测标准标准内容,检测中心-北检（北京）检测技术研究院

\u0413\u041e\u0421\u0422 28746-90

Пресс-массы и литьевые смолы термореактивные. Метод ускоренного испытания на нагревостойкость
Moulding compounds and casting thermosetting resins. Accelerated test method for heating resistance

【发布单位或类别】 RU-GOST俄罗斯国家标准
【发布日期】
【CCS分类】Q10/29建材产品
【ICS分类】29.035.20塑料和橡胶绝缘材料

GB/T 7911-2024

热固性树脂浸渍纸高压装饰层积板（HPL）
High-pressure decorative laminates made from thermosetting resins impregnated sheets (HPL)

【发布单位或类别】 CN-GB国家标准
【发布日期】2024-03-15
【CCS分类】B70人造板
【ICS分类】79.060.01木基板材综合

GB/T 26735-2011

玻璃纤维增强热固性树脂喷淋管
Glass fiber reinforced thermosetting resin spray pipe

【发布单位或类别】 CN-GB国家标准
【发布日期】2011-07-20
【CCS分类】Q23纤维增强复合材料
【ICS分类】83.120增强塑料

GB/T 27808-2011

热固性粉末涂料用饱和聚酯树脂
Saturated polyester resins for thermosetting powder coatings

【发布单位或类别】 CN-GB国家标准
【发布日期】2011-12-30
【CCS分类】G51涂料
【ICS分类】87.040涂料和清漆

GB/T 27809-2011

热固性粉末涂料用双酚A型环氧树脂
Bisphenol A epoxy resins for thermosetting powder coatings

【发布单位或类别】 CN-GB国家标准
【发布日期】2011-12-30
【CCS分类】G51涂料
【ICS分类】87.040涂料和清漆

JC/T 552-2011

纤维缠绕增强热固性树脂压力管

【发布单位或类别】 CN-JC行业标准-建材
【发布日期】2011-12-20
【CCS分类】Q23纤维增强复合材料
【ICS分类】83.080塑料

HG/T 6261-2023

热固性树脂黏度的测定旋转流变仪法

【发布单位或类别】 CN-HG行业标准-化工
【发布日期】2023-12-20
【CCS分类】G31合成树脂、塑料基础标准与通用方法
【ICS分类】83.080.10热固性塑料

KS C IEC 62011-1-2014(2019)

절연재료 — 전기적 용도의 열경화성 수지제의 사각형 육각형, 단면적을 갖는 산업용 경질 성형품 적층튜브와 막대 — 제1부: 정의 명칭 및 일반적 요구사항
Insulating materials — Industrial, rigid, moulded, laminated tubes and rods of rectangular and hexagonal cross-section based on thermosetting resins for electrical purposes — Part 1: Definitions, designations and general requirements

【发布单位或类别】 KR-KS韩国标准
【发布日期】2014-10-27
【CCS分类】纤维增强复合材料
【ICS分类】29.035.20塑料和橡胶绝缘材料

KS C IEC 61212-3-2-2019

절연재료 — 전기적 목적의 열경화성 수지제 원통 적층 튜브 및 막대 —제3부: 개별 재료에 대한 규격 —제2절: 원통 적층 성형 튜브
Insulating materials — Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes —Part 3: Specifications for individual materials —Sheet 2: Round laminated moulded tubes

【发布单位或类别】 KR-KS韩国标准
【发布日期】2019-12-30
【CCS分类】金属设备与工艺管道安装工程
【ICS分类】29.035.01绝缘材料综合

JC/T 1026-2007

玻璃纤维增强热固性树脂承载型格栅
Glass fiber reinforced thermosetting resin grating for supporting loads

【发布单位或类别】 CN-JC行业标准-建材
【发布日期】2007-04-13
【CCS分类】Q23人造板
【ICS分类】91.060.20屋顶

UNE-EN 61212-3-3:1996

INDUSTRIAL RIGID ROUND LAMINATED TUBES AND RODS BASED ON THERMOSETTING RESINS FOR ELECTRICAL PURPOSES. PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS. SHEET 3: ROUND LAMINATED MOULDED RODS.
INDUSTRIAL RIGID ROUND LAMINATED TUBES AND RODS BASED ON THERMOSETTING RESINS FOR ELECTRICAL PURPOSES. PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS. SHEET 3: ROUND LAMINATED MOULDED RODS.

【发布单位或类别】 ES-UNE西班牙标准
【发布日期】1996-11-07
【CCS分类】
【ICS分类】绝缘材料综合

IEC 61212-3-2:2013

Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials - Sheet 2: Round laminated moulded tubes
Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials - Sheet 2: Round laminated moulded tubes

【发布单位或类别】 IX-IEC国际电工委员会
【发布日期】2013-04-29
【CCS分类】
【ICS分类】29.035.01塑料和橡胶绝缘材料

UNE-EN 61212-3-2:1996

INDUSTRIAL RIGID ROUND LAMINATED TUBES AND RODS BASED ON THERMOSETTING RESINS FOR ELECTRICAL PURPOSES. PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS. SHEET 2: ROUND LAMINATED MOULDED TUBES.
INDUSTRIAL RIGID ROUND LAMINATED TUBES AND RODS BASED ON THERMOSETTING RESINS FOR ELECTRICAL PURPOSES. PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS. SHEET 2: ROUND LAMINATED MOULDED TUBES.

【发布单位或类别】 ES-UNE西班牙标准
【发布日期】1996-11-08
【CCS分类】
【ICS分类】增强塑料

IEC 62011-2:2004

Insulating materials - Industrial, rigid, moulded, laminated tubes and rods of rectangular and hexagonal cross-section, based on thermosetting resins for electrical purposes - Part 2: Methods of test
Insulating materials - Industrial, rigid, moulded, laminated tubes and rods of rectangular and hexagonal cross-section, based on thermosetting resins for electrical purposes - Part 2: Methods of test

【发布单位或类别】 IX-IEC国际电工委员会
【发布日期】2004-01-08
【CCS分类】
【ICS分类】29.035.20绝缘材料综合

SY/T 4130-2016

玻璃纤维增强热固性树脂现场缠绕立式储罐施工规范
Specification for construction of glass fiber reinforced thermosetting resin on-site winding vertical storage tanks

【发布单位或类别】 CN-SY行业标准-石油
【发布日期】2016-01-07
【CCS分类】P94
【ICS分类】83.120塑料和橡胶绝缘材料

IEC 61212-3-3:2006

Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials - Sheet 3: Round laminated moulded rods
Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials - Sheet 3: Round laminated moulded rods

【发布单位或类别】 IX-IEC国际电工委员会
【发布日期】2006-08-15
【CCS分类】
【ICS分类】29.035.01其他木基板材

IEC 62011-1:2002

Insulating materials - Industrial, rigid, moulded, laminated tubes and rods of rectangular and hexagonal cross-section based on thermosetting resins for electrical purposes - Part 1: Definitions, designations and general requirements
Insulating materials - Industrial, rigid, moulded, laminated tubes and rods of rectangular and hexagonal cross-section based on thermosetting resins for electrical purposes - Part 1: Definitions, designations and general requirements

【发布单位或类别】 IX-IEC国际电工委员会
【发布日期】2002-05-23
【CCS分类】
【ICS分类】29.035.20

BS 10/30216000 DC

BS EN 61212-3-2. Insulating materials. Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes. Part 3-2. Specifications for individual materials. Round laminated moulded tubes
BS EN 61212-3-2. Insulating materials. Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes. Part 3-2. Specifications for individual materials. Round laminated moulded tubes

【发布单位或类别】 GB-BSI英国标准学会
【发布日期】2010-01-25
【CCS分类】
【ICS分类】

GB/T 7911-2013

热固性树脂浸渍纸　高压装饰层积板(HPL)
High-pressure decorative laminates—Sheets made from thermosetting resins

【发布单位或类别】 CN-GB国家标准
【发布日期】2013-12-31
【CCS分类】B70
【ICS分类】79.060.99

BS 4154-2:1985

Corrugated plastics translucent sheets made from thermo-setting polyester resin (glass fibre reinforced)-Specification for profiles and dimensions
Corrugated plastics translucent sheets made from thermo-setting polyester resin (glass fibre reinforced)-Specification for profiles and dimensions

【发布单位或类别】 GB-BSI英国标准学会
【发布日期】1985-01-31
【CCS分类】
【ICS分类】

热固性树脂成型检测标准

Пресс-массы и литьевые смолы термореактивные. Метод ускоренного испытания на нагревостойкость Moulding compounds and casting thermosetting resins. Accelerated test method for heating resistance

热固性树脂浸渍纸高压装饰层积板（HPL） High-pressure decorative laminates made from thermosetting resins impregnated sheets (HPL)

玻璃纤维增强热固性树脂喷淋管 Glass fiber reinforced thermosetting resin spray pipe

热固性粉末涂料用饱和聚酯树脂 Saturated polyester resins for thermosetting powder coatings

热固性粉末涂料用双酚A型环氧树脂 Bisphenol A epoxy resins for thermosetting powder coatings

纤维缠绕增强热固性树脂压力管

热固性树脂黏度的测定 旋转流变仪法

玻璃纤维增强热固性树脂承载型格栅 Glass fiber reinforced thermosetting resin grating for supporting loads

玻璃纤维增强热固性树脂现场缠绕立式储罐施工规范 Specification for construction of glass fiber reinforced thermosetting resin on-site winding vertical storage tanks

热固性树脂浸渍纸 高压装饰层积板(HPL) High-pressure decorative laminates—Sheets made from thermosetting resins

Corrugated plastics translucent sheets made from thermo-setting polyester resin (glass fibre reinforced)-Specification for profiles and dimensions Corrugated plastics translucent sheets made from thermo-setting polyester resin (glass fibre reinforced)-Specification for profiles and dimensions

北检院部分仪器展示