树脂浊度测量检测标准
CNAS认证
CMA认证
JJF 1571-2016
海水浊度测量仪校准规范
Calibration Specification for Seawater Turbidity Analyzers
- 【发布单位或类别】 CN-JJF国家计量技术规范
- 【发布日期】2016-06-27
- 【CCS分类】0海洋仪器
- 【ICS分类】地质学、气象学、水文学
HY/T 100-2007
海水浊度测量仪检测方法
Test method of seawater turbidity analyzer
- 【发布单位或类别】 CN-HY行业标准-海洋
- 【发布日期】2007-12-19
- 【CCS分类】N92
- 【ICS分类】07.060光学测量仪器
ASTM D7726-11(2023)
Standard Guide for The Use of Various Turbidimeter Technologies for Measurement of Turbidity in Water
Standard Guide for The Use of Various Turbidimeter Technologies for Measurement of Turbidity in Water
- 【发布单位或类别】 US-ASTM美国材料与试验协会
- 【发布日期】2023-11-01
- 【CCS分类】
- 【ICS分类】17.180.30水的物理特性检验
ASTM D7725-17(2023)
Standard Test Method for the Continuous Measurement of Turbidity Above 1 Turbidity Unit (TU)
Standard Test Method for the Continuous Measurement of Turbidity Above 1 Turbidity Unit (TU)
- 【发布单位或类别】 US-ASTM美国材料与试验协会
- 【发布日期】2023-11-01
- 【CCS分类】
- 【ICS分类】13.060.60水的物理特性检验
AWWA JAW60510
Journal AWWA - Low-Level Turbidity Measurements: A Comparison of Instruments
Journal AWWA - Low-Level Turbidity Measurements: A Comparison of Instruments
- 【发布单位或类别】 US-AWWA美国给水工程协会
- 【发布日期】2004-08-01
- 【CCS分类】
- 【ICS分类】水的物理特性检验
ASTM D6698-24
Standard Test Method for On-Line Measurement of Turbidity Below 5 NTU in Water
Standard Test Method for On-Line Measurement of Turbidity Below 5 NTU in Water
- 【发布单位或类别】 US-ASTM美国材料与试验协会
- 【发布日期】2024-04-01
- 【CCS分类】
- 【ICS分类】13.060.60水的物理特性检验
ASTM D7725-17
Standard Test Method for the Continuous Measurement of Turbidity Above 1 Turbidity Unit (TU)
Standard Test Method for the Continuous Measurement of Turbidity Above 1 Turbidity Unit (TU)
- 【发布单位或类别】 US-ASTM美国材料与试验协会
- 【发布日期】2017-12-15
- 【CCS分类】
- 【ICS分类】13.060.60光学测量仪器
AWWA JAW34118
Journal AWWA - An Analysis of Low-Level Turbidity Measurements
Journal AWWA - An Analysis of Low-Level Turbidity Measurements
- 【发布单位或类别】 US-AWWA美国给水工程协会
- 【发布日期】1992-12-01
- 【CCS分类】
- 【ICS分类】光学测量仪器
AWWA ACE59859
Interference to Particle Counting and Turbidity Measurements from Dissolved Gas
Interference to Particle Counting and Turbidity Measurements from Dissolved Gas
- 【发布单位或类别】 US-AWWA美国给水工程协会
- 【发布日期】2004-06-17
- 【CCS分类】
- 【ICS分类】热固性塑料
ASTM D7725-12
Standard Test Method for the Continuous Measurement of Turbidity Above 1 Turbidity Unit (TU)
Standard Test Method for the Continuous Measurement of Turbidity Above 1 Turbidity Unit (TU)
- 【发布单位或类别】 US-ASTM美国材料与试验协会
- 【发布日期】2012-01-01
- 【CCS分类】
- 【ICS分类】13.060.60水的物理特性检验
ASTM D7726-11(2016)e1
Standard Guide for The Use of Various Turbidimeter Technologies for Measurement of Turbidity in Water
Standard Guide for The Use of Various Turbidimeter Technologies for Measurement of Turbidity in Water
- 【发布单位或类别】 US-ASTM美国材料与试验协会
- 【发布日期】2016-11-01
- 【CCS分类】
- 【ICS分类】17.180.30水的物理特性检验
ASTM D7726-11
Standard Guide for The Use of Various Turbidimeter Technologies for Measurement of Turbidity in Water
Standard Guide for The Use of Various Turbidimeter Technologies for Measurement of Turbidity in Water
- 【发布单位或类别】 US-ASTM美国材料与试验协会
- 【发布日期】2011-05-01
- 【CCS分类】
- 【ICS分类】17.180.30水的物理特性检验
JIS K 6941:2019
UV curable resin and thermosetting resin -- Continuous measurement method of shrinkage rate
UV curable resin and thermosetting resin -- Continuous measurement method of shrinkage rate
- 【发布单位或类别】 JP-JSA日本工业标准调查会
- 【发布日期】2019-01-01
- 【CCS分类】
- 【ICS分类】涂料粘合剂
BS ISO 4216:2021
Thermosetting resin and UV curable resin. Determination of shrinkage by continuous measurement method
Thermosetting resin and UV curable resin. Determination of shrinkage by continuous measurement method
- 【发布单位或类别】 GB-BSI英国标准学会
- 【发布日期】2021-05-10
- 【CCS分类】
- 【ICS分类】
ISO 4216:2021
Thermosetting resin and UV curable resin — Determination of shrinkage by continuous measurement method
Thermosetting resin and UV curable resin — Determination of shrinkage by continuous measurement method
- 【发布单位或类别】 IX-ISO国际标准化组织
- 【发布日期】2021-04-22
- 【CCS分类】
- 【ICS分类】83.080.10
AWWA WQTC50348
Ultra Low Range Instrument Increases Turbidimetric Sensitivity by Two Orders of Magnitude
Ultra Low Range Instrument Increases Turbidimetric Sensitivity by Two Orders of Magnitude
- 【发布单位或类别】 US-AWWA美国给水工程协会
- 【发布日期】1999-01-01
- 【CCS分类】
- 【ICS分类】
ASTM D6698-14
Standard Test Method for On-Line Measurement of Turbidity Below 5 NTU in Water (Withdrawn 2023)
Standard Test Method for On-Line Measurement of Turbidity Below 5 NTU in Water (Withdrawn 2023)
- 【发布单位或类别】 US-ASTM美国材料与试验协会
- 【发布日期】2014-03-15
- 【CCS分类】
- 【ICS分类】13.060.60
ASTM D6698-12
Standard Test Method for On-Line Measurement of Turbidity Below 5 NTU in Water
Standard Test Method for On-Line Measurement of Turbidity Below 5 NTU in Water
- 【发布单位或类别】 US-ASTM美国材料与试验协会
- 【发布日期】2012-06-01
- 【CCS分类】
- 【ICS分类】13.060.60
ASTM D6698-07
Standard Test Method for On-Line Measurement of Turbidity Below 5 NTU in Water
Standard Test Method for On-Line Measurement of Turbidity Below 5 NTU in Water
- 【发布单位或类别】 US-ASTM美国材料与试验协会
- 【发布日期】2007-06-15
- 【CCS分类】
- 【ICS分类】13.060.60
ASTM D1725-12(2019)
Standard Practice for Preparing Resin Solutions for Viscosity Measurement by Bubble Time Method
Standard Practice for Preparing Resin Solutions for Viscosity Measurement by Bubble Time Method
- 【发布单位或类别】 US-ASTM美国材料与试验协会
- 【发布日期】2019-06-01
- 【CCS分类】
- 【ICS分类】87.060.20
