树脂燃烧危害检测标准，树脂燃烧危害检测标准标准内容,检测中心-北检（北京）检测技术研究院

GB/T 5169.35-2015

电工电子产品着火危险试验第35部分：燃烧流的腐蚀危害总则
Fire hazard testing for electric and eletronic products—Part 35: Corrosion damage effects of fire effluent—General guidance

【发布单位或类别】 CN-GB国家标准
【发布日期】2015-10-09
【CCS分类】K04基础标准和通用方法
【ICS分类】29.020电气工程综合

GB/T 5169.36-2015

电工电子产品着火危险试验第36部分：燃烧流的腐蚀危害试验方法概要和相关性
Fire hazard testing for electric and electronic products—Part 36: Corrosion damage effects of fire effluent—Summary and relevance of test methods

【发布单位或类别】 CN-GB国家标准
【发布日期】2015-10-09
【CCS分类】K04基础标准和通用方法
【ICS分类】13.220.99有关消防的其他标准

SAE AIR825/13

Guide for Evaluating Combustion Hazards in Aircraft Oxygen Systems
Guide for Evaluating Combustion Hazards in Aircraft Oxygen Systems

【发布单位或类别】 US-SAE美国机动车工程师协会
【发布日期】2003-01-11
【CCS分类】劳动安全技术
【ICS分类】电气工程综合

20240749-T-604

电工电子产品着火危险试验第35部分：燃烧流的腐蚀危害总则
Fire hazard testing for electric and electronic products—Part 35: Corrosion damage effects of fire effluent—General guidance

【发布单位或类别】 CN-PLAN国家标准计划
【发布日期】2024-04-25
【CCS分类】劳动安全技术
【ICS分类】29.020热固性塑料

ASTM D2584-18

Standard Test Method for Ignition Loss of Cured Reinforced Resins
Standard Test Method for Ignition Loss of Cured Reinforced Resins

【发布单位或类别】 US-ASTM美国材料与试验协会
【发布日期】2018-09-15
【CCS分类】劳动防护用品
【ICS分类】83.080.10有关消防的其他标准

NFPA(Fire) 85

Boiler and Combustion Systems Hazards Code, 2015 Edition
Boiler and Combustion Systems Hazards Code, 2015 Edition

【发布单位或类别】 US-NFPA美国国家消防协会
【发布日期】2014-12-01
【CCS分类】
【ICS分类】易爆环境用电气设备

20240748-T-604

电工电子产品着火危险试验第36部分：燃烧流的腐蚀危害试验方法概要和相关性
Fire hazard testing for electric and electronic products—Part 36: Corrosion damage effects of fire effluent -Summary and relevance of test methods

【发布单位或类别】 CN-PLAN国家标准计划
【发布日期】2024-04-25
【CCS分类】
【ICS分类】13.220.99热固性塑料

\u0413\u041e\u0421\u0422 31442-2011

Оборудование группы I, уровень взрывозащиты Ма, для применения в среде, опасной по воспламенению рудничного газа и/или угольной пыли
Group I, equipment protection level Ma intended to remain functional in atmosphere endangered by firedamp and/or coal dust

【发布单位或类别】 RU-GOST俄罗斯国家标准
【发布日期】2011-11-29
【CCS分类】C65/74
【ICS分类】29.260.20热固性塑料

ASTM D2584-11

Standard Test Method for Ignition Loss of Cured Reinforced Resins
Standard Test Method for Ignition Loss of Cured Reinforced Resins

【发布单位或类别】 US-ASTM美国材料与试验协会
【发布日期】2011-10-15
【CCS分类】
【ICS分类】83.080.10热固性塑料

ASTM D2584-08

Standard Test Method for Ignition Loss of Cured Reinforced Resins
Standard Test Method for Ignition Loss of Cured Reinforced Resins

【发布单位或类别】 US-ASTM美国材料与试验协会
【发布日期】2008-05-01
【CCS分类】
【ICS分类】83.080.10热固性塑料

ASTM D2584-02

Standard Test Method for Ignition Loss of Cured Reinforced Resins
Standard Test Method for Ignition Loss of Cured Reinforced Resins

【发布单位或类别】 US-ASTM美国材料与试验协会
【发布日期】2002-03-10
【CCS分类】
【ICS分类】83.080.10印制电路和印制电路板

ASTM D2584-94

Standard Test Method for Ignition Loss of Cured Reinforced Resins
Standard Test Method for Ignition Loss of Cured Reinforced Resins

【发布单位或类别】 US-ASTM美国材料与试验协会
【发布日期】2002-03-10
【CCS分类】
【ICS分类】83.080.10易爆环境用电气设备

DOD DOD-E-24607A Amendment-I1

ENAMEL, INTERIOR, NONFLAMING (DRY), CHLORINATED ALKYD RESIN, SEMIGLOSS (METRIC) (SUPERSEDING DOD-E-24607, MIL-C-22325B AND DOD-R-21417A)
ENAMEL, INTERIOR, NONFLAMING (DRY), CHLORINATED ALKYD RESIN, SEMIGLOSS (METRIC) (SUPERSEDING DOD-E-24607, MIL-C-22325B AND DOD-R-21417A)

【发布单位或类别】 US-DOD美国国防部标准化文件（含MIL标准）
【发布日期】2006-09-11
【CCS分类】
【ICS分类】防护手套

AS 1169-1982

Minimizing of combustion hazards arising from the medical use of flammable anaesthetic agents
Minimizing of combustion hazards arising from the medical use of flammable anaesthetic agents

【发布单位或类别】 AU-AS澳大利亚标准
【发布日期】1982-01-01
【CCS分类】
【ICS分类】

IEC 61249-2-39:2012

Materials for printed boards and other interconnecting structures - Part 2-39: Reinforced base materials clad and unclad - High performance epoxide and non-epoxide, woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly
Materials for printed boards and other interconnecting structures - Part 2-39: Reinforced base materials clad and unclad - High performance epoxide and non-epoxide, woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly

【发布单位或类别】 IX-IEC国际电工委员会
【发布日期】2012-11-29
【CCS分类】
【ICS分类】31.180

\u0413\u041e\u0421\u0422 \u0420 \u0415\u041d 50303-2009

Оборудование группы I, уровень взрывозащиты Ма для применения в среде, опасной по воспламенению рудничного газа и/или угольной пыли
Group I, equipment protection level Ma intended to remain functional in atmosphere endangered by firedamp and/or coal dust

【发布单位或类别】 RU-GOST俄罗斯国家标准
【发布日期】
【CCS分类】C65/74
【ICS分类】29.260.20

GB 24541-2022

手部防护　机械危害防护手套
Hand protection—Protective gloves against mechanical risks

【发布单位或类别】 CN-GB国家标准
【发布日期】2022-12-29
【CCS分类】C73
【ICS分类】13.340.40

MIL MIL-E-17970C Notice 1-Cancellation

ENAMEL, NONFLAMING (DRY), CHLORINATED ALKYD RESIN, SOFT WHITE, SEMIGLSS, FORMULA NO. 124/58 (S/S BY DOD-E-24607)
ENAMEL, NONFLAMING (DRY), CHLORINATED ALKYD RESIN, SOFT WHITE, SEMIGLSS, FORMULA NO. 124/58 (S/S BY DOD-E-24607)

【发布单位或类别】 US-MIL美国军事规范和标准
【发布日期】1981-10-13
【CCS分类】
【ICS分类】

DOD DOD-E-24607A

ENAMEL, INTERIOR, NONFLAMING (DRY), CHLORINATED ALKYD RESIN, SEMIGLOSS (METRIC) (SUPERSEDING DOD-E-24607, MIL-C-22325B AND DOD-R-21417A)
ENAMEL, INTERIOR, NONFLAMING (DRY), CHLORINATED ALKYD RESIN, SEMIGLOSS (METRIC) (SUPERSEDING DOD-E-24607, MIL-C-22325B AND DOD-R-21417A)

【发布单位或类别】 US-DOD美国国防部标准化文件（含MIL标准）
【发布日期】1987-07-31
【CCS分类】
【ICS分类】

MIL MIL-E-17971C Notice 1-Cancellation

ENAMEL, NONFLAMING (DRY), CHLORINATED ALKYD RESIN, PASTEL GREEN, SEMIGLOSS FORMULA NO. 125/58 (S/S BY DOD-E-24607)
ENAMEL, NONFLAMING (DRY), CHLORINATED ALKYD RESIN, PASTEL GREEN, SEMIGLOSS FORMULA NO. 125/58 (S/S BY DOD-E-24607)

【发布单位或类别】 US-MIL美国军事规范和标准
【发布日期】1981-10-13
【CCS分类】
【ICS分类】

树脂燃烧危害检测标准

电工电子产品着火危险试验 第35部分：燃烧流的腐蚀危害 总则 Fire hazard testing for electric and eletronic products—Part 35: Corrosion damage effects of fire effluent—General guidance

电工电子产品着火危险试验 第36部分：燃烧流的腐蚀危害 试验方法概要和相关性 Fire hazard testing for electric and electronic products—Part 36: Corrosion damage effects of fire effluent—Summary and relevance of test methods

Guide for Evaluating Combustion Hazards in Aircraft Oxygen Systems Guide for Evaluating Combustion Hazards in Aircraft Oxygen Systems

电工电子产品着火危险试验 第35部分：燃烧流的腐蚀危害 总则 Fire hazard testing for electric and electronic products—Part 35: Corrosion damage effects of fire effluent—General guidance

Standard Test Method for Ignition Loss of Cured Reinforced Resins Standard Test Method for Ignition Loss of Cured Reinforced Resins

Boiler and Combustion Systems Hazards Code, 2015 Edition Boiler and Combustion Systems Hazards Code, 2015 Edition

电工电子产品着火危险试验 第36部分：燃烧流的腐蚀危害 试验方法概要和相关性 Fire hazard testing for electric and electronic products—Part 36: Corrosion damage effects of fire effluent -Summary and relevance of test methods

Standard Test Method for Ignition Loss of Cured Reinforced Resins Standard Test Method for Ignition Loss of Cured Reinforced Resins

Standard Test Method for Ignition Loss of Cured Reinforced Resins Standard Test Method for Ignition Loss of Cured Reinforced Resins

Standard Test Method for Ignition Loss of Cured Reinforced Resins Standard Test Method for Ignition Loss of Cured Reinforced Resins

Standard Test Method for Ignition Loss of Cured Reinforced Resins Standard Test Method for Ignition Loss of Cured Reinforced Resins

ENAMEL, INTERIOR, NONFLAMING (DRY), CHLORINATED ALKYD RESIN, SEMIGLOSS (METRIC) (SUPERSEDING DOD-E-24607, MIL-C-22325B AND DOD-R-21417A) ENAMEL, INTERIOR, NONFLAMING (DRY), CHLORINATED ALKYD RESIN, SEMIGLOSS (METRIC) (SUPERSEDING DOD-E-24607, MIL-C-22325B AND DOD-R-21417A)

Minimizing of combustion hazards arising from the medical use of flammable anaesthetic agents Minimizing of combustion hazards arising from the medical use of flammable anaesthetic agents

手部防护 机械危害防护手套 Hand protection—Protective gloves against mechanical risks

ENAMEL, NONFLAMING (DRY), CHLORINATED ALKYD RESIN, SOFT WHITE, SEMIGLSS, FORMULA NO. 124/58 (S/S BY DOD-E-24607) ENAMEL, NONFLAMING (DRY), CHLORINATED ALKYD RESIN, SOFT WHITE, SEMIGLSS, FORMULA NO. 124/58 (S/S BY DOD-E-24607)

ENAMEL, INTERIOR, NONFLAMING (DRY), CHLORINATED ALKYD RESIN, SEMIGLOSS (METRIC) (SUPERSEDING DOD-E-24607, MIL-C-22325B AND DOD-R-21417A) ENAMEL, INTERIOR, NONFLAMING (DRY), CHLORINATED ALKYD RESIN, SEMIGLOSS (METRIC) (SUPERSEDING DOD-E-24607, MIL-C-22325B AND DOD-R-21417A)

ENAMEL, NONFLAMING (DRY), CHLORINATED ALKYD RESIN, PASTEL GREEN, SEMIGLOSS FORMULA NO. 125/58 (S/S BY DOD-E-24607) ENAMEL, NONFLAMING (DRY), CHLORINATED ALKYD RESIN, PASTEL GREEN, SEMIGLOSS FORMULA NO. 125/58 (S/S BY DOD-E-24607)

北检院部分仪器展示

电工电子产品着火危险试验第35部分：燃烧流的腐蚀危害总则
Fire hazard testing for electric and eletronic products—Part 35: Corrosion damage effects of fire effluent—General guidance

电工电子产品着火危险试验第36部分：燃烧流的腐蚀危害试验方法概要和相关性
Fire hazard testing for electric and electronic products—Part 36: Corrosion damage effects of fire effluent—Summary and relevance of test methods

Guide for Evaluating Combustion Hazards in Aircraft Oxygen Systems
Guide for Evaluating Combustion Hazards in Aircraft Oxygen Systems

电工电子产品着火危险试验第35部分：燃烧流的腐蚀危害总则
Fire hazard testing for electric and electronic products—Part 35: Corrosion damage effects of fire effluent—General guidance

Standard Test Method for Ignition Loss of Cured Reinforced Resins
Standard Test Method for Ignition Loss of Cured Reinforced Resins

Boiler and Combustion Systems Hazards Code, 2015 Edition
Boiler and Combustion Systems Hazards Code, 2015 Edition

电工电子产品着火危险试验第36部分：燃烧流的腐蚀危害试验方法概要和相关性
Fire hazard testing for electric and electronic products—Part 36: Corrosion damage effects of fire effluent -Summary and relevance of test methods

Standard Test Method for Ignition Loss of Cured Reinforced Resins
Standard Test Method for Ignition Loss of Cured Reinforced Resins

Standard Test Method for Ignition Loss of Cured Reinforced Resins
Standard Test Method for Ignition Loss of Cured Reinforced Resins

Standard Test Method for Ignition Loss of Cured Reinforced Resins
Standard Test Method for Ignition Loss of Cured Reinforced Resins

Standard Test Method for Ignition Loss of Cured Reinforced Resins
Standard Test Method for Ignition Loss of Cured Reinforced Resins

ENAMEL, INTERIOR, NONFLAMING (DRY), CHLORINATED ALKYD RESIN, SEMIGLOSS (METRIC) (SUPERSEDING DOD-E-24607, MIL-C-22325B AND DOD-R-21417A)
ENAMEL, INTERIOR, NONFLAMING (DRY), CHLORINATED ALKYD RESIN, SEMIGLOSS (METRIC) (SUPERSEDING DOD-E-24607, MIL-C-22325B AND DOD-R-21417A)

Minimizing of combustion hazards arising from the medical use of flammable anaesthetic agents
Minimizing of combustion hazards arising from the medical use of flammable anaesthetic agents

手部防护　机械危害防护手套
Hand protection—Protective gloves against mechanical risks

ENAMEL, NONFLAMING (DRY), CHLORINATED ALKYD RESIN, SOFT WHITE, SEMIGLSS, FORMULA NO. 124/58 (S/S BY DOD-E-24607)
ENAMEL, NONFLAMING (DRY), CHLORINATED ALKYD RESIN, SOFT WHITE, SEMIGLSS, FORMULA NO. 124/58 (S/S BY DOD-E-24607)

ENAMEL, INTERIOR, NONFLAMING (DRY), CHLORINATED ALKYD RESIN, SEMIGLOSS (METRIC) (SUPERSEDING DOD-E-24607, MIL-C-22325B AND DOD-R-21417A)
ENAMEL, INTERIOR, NONFLAMING (DRY), CHLORINATED ALKYD RESIN, SEMIGLOSS (METRIC) (SUPERSEDING DOD-E-24607, MIL-C-22325B AND DOD-R-21417A)

ENAMEL, NONFLAMING (DRY), CHLORINATED ALKYD RESIN, PASTEL GREEN, SEMIGLOSS FORMULA NO. 125/58 (S/S BY DOD-E-24607)
ENAMEL, NONFLAMING (DRY), CHLORINATED ALKYD RESIN, PASTEL GREEN, SEMIGLOSS FORMULA NO. 125/58 (S/S BY DOD-E-24607)