聚酰亚胺树脂英文检测标准，聚酰亚胺树脂英文检测标准标准内容,检测中心-北检（北京）检测技术研究院

HG/T 6258-2023

塑料热塑性聚酰亚胺（PI）树脂

【发布单位或类别】 CN-HG行业标准-化工
【发布日期】2023-12-20
【CCS分类】G32合成树脂、塑料
【ICS分类】83.080.20热塑性塑料

DB51/T 2680-2020

热塑性聚酰亚胺树脂技术规范

【发布单位或类别】 CN-DB51四川省地方标准
【发布日期】2020-07-14
【CCS分类】G32合成树脂、塑料
【ICS分类】83.080.20热塑性塑料

DB22/T 1944-2013

一类热塑性聚酰亚胺树脂

【发布单位或类别】 CN-DB22吉林省地方标准
【发布日期】2013-12-04
【CCS分类】G32合成树脂、塑料
【ICS分类】83.080.20热塑性塑料

GB/T 1303.9-2009

电气用热固性树脂工业硬质层压板第9部分：聚酰亚胺树脂硬质层压板
Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 9: Requirements for rigid laminated sheets based on polyimide resins

【发布单位或类别】 CN-GB国家标准
【发布日期】2009-06-10
【CCS分类】K15电工绝缘材料及其制品
【ICS分类】29.035.01绝缘材料综合

MIL MIL-S-13949/20A

SHEET, PRINTED WIRING BOARD, PREPREG, BASE MATERIAL QI (WOVEN QUARTZ REINFORCEMENT, POLYIMIDE RESIN) (SUPERSEDING MIL-S-13949/20) (NO S/S DOCUMENT)
SHEET, PRINTED WIRING BOARD, PREPREG, BASE MATERIAL QI (WOVEN QUARTZ REINFORCEMENT, POLYIMIDE RESIN) (SUPERSEDING MIL-S-13949/20) (NO S/S DOCUMENT)

【发布单位或类别】 US-MIL美国军事规范和标准
【发布日期】1993-12-06
【CCS分类】
【ICS分类】橡胶和塑料工业的生产工艺

MIL MIL-S-13949/20A Notice 2-Cancellation

SHEET, PRINTED WIRING BOARD, PREPREG, BASE MATERIAL QI (WOVEN QUARTZ REINFORCEMENT, POLYIMIDE RESIN) (SUPERSEDING MIL-S-13949/20) (NO S/S DOCUMENT)
SHEET, PRINTED WIRING BOARD, PREPREG, BASE MATERIAL QI (WOVEN QUARTZ REINFORCEMENT, POLYIMIDE RESIN) (SUPERSEDING MIL-S-13949/20) (NO S/S DOCUMENT)

【发布单位或类别】 US-MIL美国军事规范和标准
【发布日期】1998-11-30
【CCS分类】
【ICS分类】导体材料

MIL MIL-S-13949/20A Notice 1-Inactivation

SHEET, PRINTED WIRING BOARD, PREPREG, BASE MATERIAL QI (WOVEN QUARTZ REINFORCEMENT, POLYIMIDE RESIN) (SUPERSEDING MIL-S-13949/20) (NO S/S DOCUMENT)
SHEET, PRINTED WIRING BOARD, PREPREG, BASE MATERIAL QI (WOVEN QUARTZ REINFORCEMENT, POLYIMIDE RESIN) (SUPERSEDING MIL-S-13949/20) (NO S/S DOCUMENT)

【发布单位或类别】 US-MIL美国军事规范和标准
【发布日期】1997-08-01
【CCS分类】
【ICS分类】橡胶和塑料制品综合

MIL MIL-S-13949/19A Notice 2-Cancellation

SHEET, PRINTED WIRING BOARD, LAMINATED, BASE MATERIAL QI (WOVEN QUARTZ REINFORCEMENT, POLYIMIDE RESIN, HEAT RESISTANT, METAL CLAD OR UNCLAD) (SUPERSEDING MIL-S-13949/19) (NO S/S DOCUMENT)
SHEET, PRINTED WIRING BOARD, LAMINATED, BASE MATERIAL QI (WOVEN QUARTZ REINFORCEMENT, POLYIMIDE RESIN, HEAT RESISTANT, METAL CLAD OR UNCLAD) (SUPERSEDING MIL-S-13949/19) (NO S/S DOCUMENT)

【发布单位或类别】 US-MIL美国军事规范和标准
【发布日期】1998-11-30
【CCS分类】
【ICS分类】

T/CIEP 013-2022

PMDA-ODA 型聚酰亚胺树脂溶液

【发布单位或类别】 CN-TUANTI团体标准
【发布日期】2022-06-28
【CCS分类】
【ICS分类】83.020

MIL MIL-S-13949/19A Notice 1-Inactivation

SHEET, PRINTED WIRING BOARD, LAMINATED, BASE MATERIAL QI (WOVEN QUARTZ REINFORCEMENT, POLYIMIDE RESIN, HEAT RESISTANT, METAL CLAD OR UNCLAD) (SUPERSEDING MIL-S-13949/19) (NO S/S DOCUMENT)
SHEET, PRINTED WIRING BOARD, LAMINATED, BASE MATERIAL QI (WOVEN QUARTZ REINFORCEMENT, POLYIMIDE RESIN, HEAT RESISTANT, METAL CLAD OR UNCLAD) (SUPERSEDING MIL-S-13949/19) (NO S/S DOCUMENT)

【发布单位或类别】 US-MIL美国军事规范和标准
【发布日期】1997-08-01
【CCS分类】
【ICS分类】

MIL MIL-S-13949/19A

SHEET, PRINTED WIRING BOARD, LAMINATED, BASE MATERIAL QI (WOVEN QUARTZ REINFORCEMENT, POLYIMIDE RESIN, HEAT RESISTANT, METAL CLAD OR UNCLAD) (SUPERSEDING MIL-S-13949/19) (NO S/S DOCUMENT)
SHEET, PRINTED WIRING BOARD, LAMINATED, BASE MATERIAL QI (WOVEN QUARTZ REINFORCEMENT, POLYIMIDE RESIN, HEAT RESISTANT, METAL CLAD OR UNCLAD) (SUPERSEDING MIL-S-13949/19) (NO S/S DOCUMENT)

【发布单位或类别】 US-MIL美国军事规范和标准
【发布日期】1993-12-06
【CCS分类】
【ICS分类】

T/CIET 844-2024

聚酰亚胺树脂（PI）碳纤维预浸料技术要求

【发布单位或类别】 CN-TUANTI团体标准
【发布日期】2024-12-04
【CCS分类】
【ICS分类】29.050

SAE AMS3619E

Resin, Polyimide, Laminating High Temperature Resistant, 315 °C (599 °F)
Resin, Polyimide, Laminating High Temperature Resistant, 315 °C (599 °F)

【发布单位或类别】 US-SAE美国机动车工程师协会
【发布日期】2016-11-16
【CCS分类】
【ICS分类】

SAE AMS3845C

Cloth, Type “E” Glass “B” Stage Addition Cure Polyimide-Resin-Impregnated
Cloth, Type “E” Glass “B” Stage Addition Cure Polyimide-Resin-Impregnated

【发布单位或类别】 US-SAE美国机动车工程师协会
【发布日期】2016-12-15
【CCS分类】
【ICS分类】

SAE AMS3849C

Cloth, Quartz, Style 581 Fabric Hot-Melt, Addition-Type, Polyimide Resin Impregnated
Cloth, Quartz, Style 581 Fabric Hot-Melt, Addition-Type, Polyimide Resin Impregnated

【发布单位或类别】 US-SAE美国机动车工程师协会
【发布日期】2016-12-15
【CCS分类】
【ICS分类】

SAE AMS3684C

Resin, Polyimide, Sealing High-Temperature Resistant, 315 °C (600 °F) Unfilled
Resin, Polyimide, Sealing High-Temperature Resistant, 315 °C (600 °F) Unfilled

【发布单位或类别】 US-SAE美国机动车工程师协会
【发布日期】2016-10-13
【CCS分类】
【ICS分类】

ASTM D6456-10(2018)

Standard Specification for Finished Parts Made from Polyimide Resin
Standard Specification for Finished Parts Made from Polyimide Resin

【发布单位或类别】 US-ASTM美国材料与试验协会
【发布日期】2018-08-01
【CCS分类】
【ICS分类】83.140.01

SAE AMS3844C

Cloth, Type \
Cloth, Type \

【发布单位或类别】 US-SAE美国机动车工程师协会
【发布日期】2016-12-16
【CCS分类】
【ICS分类】

SAE AMS3847D

Cloth, Quartz, \
Cloth, Quartz, \

【发布单位或类别】 US-SAE美国机动车工程师协会
【发布日期】2016-12-15
【CCS分类】
【ICS分类】

SAE AMS3618A

Resin, Polyimide, Thermosetting High Heat 290°C (554°F) Resistant
Resin, Polyimide, Thermosetting High Heat 290°C (554°F) Resistant

【发布单位或类别】 US-SAE美国机动车工程师协会
【发布日期】1996-06-01
【CCS分类】
【ICS分类】

聚酰亚胺树脂英文检测标准

塑料 热塑性聚酰亚胺（PI）树脂

热塑性聚酰亚胺树脂技术规范

一类热塑性聚酰亚胺树脂

电气用热固性树脂工业硬质层压板 第9部分：聚酰亚胺树脂硬质层压板 Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 9: Requirements for rigid laminated sheets based on polyimide resins

SHEET, PRINTED WIRING BOARD, PREPREG, BASE MATERIAL QI (WOVEN QUARTZ REINFORCEMENT, POLYIMIDE RESIN) (SUPERSEDING MIL-S-13949/20) (NO S/S DOCUMENT) SHEET, PRINTED WIRING BOARD, PREPREG, BASE MATERIAL QI (WOVEN QUARTZ REINFORCEMENT, POLYIMIDE RESIN) (SUPERSEDING MIL-S-13949/20) (NO S/S DOCUMENT)

SHEET, PRINTED WIRING BOARD, PREPREG, BASE MATERIAL QI (WOVEN QUARTZ REINFORCEMENT, POLYIMIDE RESIN) (SUPERSEDING MIL-S-13949/20) (NO S/S DOCUMENT) SHEET, PRINTED WIRING BOARD, PREPREG, BASE MATERIAL QI (WOVEN QUARTZ REINFORCEMENT, POLYIMIDE RESIN) (SUPERSEDING MIL-S-13949/20) (NO S/S DOCUMENT)

SHEET, PRINTED WIRING BOARD, PREPREG, BASE MATERIAL QI (WOVEN QUARTZ REINFORCEMENT, POLYIMIDE RESIN) (SUPERSEDING MIL-S-13949/20) (NO S/S DOCUMENT) SHEET, PRINTED WIRING BOARD, PREPREG, BASE MATERIAL QI (WOVEN QUARTZ REINFORCEMENT, POLYIMIDE RESIN) (SUPERSEDING MIL-S-13949/20) (NO S/S DOCUMENT)

PMDA-ODA 型聚酰亚胺树脂溶液

聚酰亚胺树脂（PI）碳纤维预浸料技术要求

Resin, Polyimide, Laminating High Temperature Resistant, 315 °C (599 °F) Resin, Polyimide, Laminating High Temperature Resistant, 315 °C (599 °F)

Cloth, Type “E” Glass “B” Stage Addition Cure Polyimide-Resin-Impregnated Cloth, Type “E” Glass “B” Stage Addition Cure Polyimide-Resin-Impregnated

Cloth, Quartz, Style 581 Fabric Hot-Melt, Addition-Type, Polyimide Resin Impregnated Cloth, Quartz, Style 581 Fabric Hot-Melt, Addition-Type, Polyimide Resin Impregnated

Resin, Polyimide, Sealing High-Temperature Resistant, 315 °C (600 °F) Unfilled Resin, Polyimide, Sealing High-Temperature Resistant, 315 °C (600 °F) Unfilled

Standard Specification for Finished Parts Made from Polyimide Resin Standard Specification for Finished Parts Made from Polyimide Resin

Cloth, Type \ Cloth, Type \

Cloth, Quartz, \ Cloth, Quartz, \

Resin, Polyimide, Thermosetting High Heat 290°C (554°F) Resistant Resin, Polyimide, Thermosetting High Heat 290°C (554°F) Resistant

北检院部分仪器展示

塑料热塑性聚酰亚胺（PI）树脂

电气用热固性树脂工业硬质层压板第9部分：聚酰亚胺树脂硬质层压板
Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 9: Requirements for rigid laminated sheets based on polyimide resins

SHEET, PRINTED WIRING BOARD, PREPREG, BASE MATERIAL QI (WOVEN QUARTZ REINFORCEMENT, POLYIMIDE RESIN) (SUPERSEDING MIL-S-13949/20) (NO S/S DOCUMENT)
SHEET, PRINTED WIRING BOARD, PREPREG, BASE MATERIAL QI (WOVEN QUARTZ REINFORCEMENT, POLYIMIDE RESIN) (SUPERSEDING MIL-S-13949/20) (NO S/S DOCUMENT)

SHEET, PRINTED WIRING BOARD, PREPREG, BASE MATERIAL QI (WOVEN QUARTZ REINFORCEMENT, POLYIMIDE RESIN) (SUPERSEDING MIL-S-13949/20) (NO S/S DOCUMENT)
SHEET, PRINTED WIRING BOARD, PREPREG, BASE MATERIAL QI (WOVEN QUARTZ REINFORCEMENT, POLYIMIDE RESIN) (SUPERSEDING MIL-S-13949/20) (NO S/S DOCUMENT)

SHEET, PRINTED WIRING BOARD, PREPREG, BASE MATERIAL QI (WOVEN QUARTZ REINFORCEMENT, POLYIMIDE RESIN) (SUPERSEDING MIL-S-13949/20) (NO S/S DOCUMENT)
SHEET, PRINTED WIRING BOARD, PREPREG, BASE MATERIAL QI (WOVEN QUARTZ REINFORCEMENT, POLYIMIDE RESIN) (SUPERSEDING MIL-S-13949/20) (NO S/S DOCUMENT)

Resin, Polyimide, Laminating High Temperature Resistant, 315 °C (599 °F)
Resin, Polyimide, Laminating High Temperature Resistant, 315 °C (599 °F)

Cloth, Type “E” Glass “B” Stage Addition Cure Polyimide-Resin-Impregnated
Cloth, Type “E” Glass “B” Stage Addition Cure Polyimide-Resin-Impregnated

Cloth, Quartz, Style 581 Fabric Hot-Melt, Addition-Type, Polyimide Resin Impregnated
Cloth, Quartz, Style 581 Fabric Hot-Melt, Addition-Type, Polyimide Resin Impregnated

Resin, Polyimide, Sealing High-Temperature Resistant, 315 °C (600 °F) Unfilled
Resin, Polyimide, Sealing High-Temperature Resistant, 315 °C (600 °F) Unfilled

Standard Specification for Finished Parts Made from Polyimide Resin
Standard Specification for Finished Parts Made from Polyimide Resin

Cloth, Type \
Cloth, Type \

Cloth, Quartz, \
Cloth, Quartz, \

Resin, Polyimide, Thermosetting High Heat 290°C (554°F) Resistant
Resin, Polyimide, Thermosetting High Heat 290°C (554°F) Resistant