HG/T 4346-2022
GB/T 14834-2009
Rubber, vulcanized or thermoplastic - Determination of tendency to adhere to and corrode metals
HG/T 4346-2012
Chlorinated rubber resin for coatings
JB/T 6353-2015
ISO 1817:2024
Rubber, vulcanized or thermoplastic — Determination of the effect of liquids
JB/T 6353-2006
Bonded abrasive products-Resinoid and rubber bond flat grinding wheel
JB/T 6353-1992
GB/T 14834-1993
Rubber, vulcanized—Determination of adhesion to, and corrosion of,metals
T/ZZB 1118-2019
SAE AMS3704B
Adhesive, Contact Polychloroprene (CR) Rubber, Resin Modified
QPL QPL-81294-26
REMOVER, PAINT, EPOXY, POLYSULFIDE AND POLYURETHANE SYSTEMS (SUPERSEDING QPL-81294-25)(INACTIVE DUE TO MIL-SPEC BEING INACTIVE)
SAE AMS7268D
Rubber: Silicone [VMQ] Non-Oil Resistant Low Compression Set, 65 - 75 Type A Hardness
KS M ISO 6907-2008(2013)
Rubber footwear-Vulcanized resin rubber and vulcanized high-hardness rubber soling materials-Specification
SAE AMS3307E
Elastomer: Rubber, Silicone (VMQ), Non-Oil-Resistant, Low Compression Set, 65 - 75 Shore A Hardness
ISO 6907:1994
Rubber footwear — Vulcanized resin rubber and vulcanized high-hardness rubber soling materials — Specification
GB/T 5009.152-2003
Determination of residual acrylonitrile monomer in styrene—acrylonitrile copolymers and rubber—modified acrylonitrile—butadiene—styrene resins and their products used for food packaging
ISO 6907:1984
Rubber footwear — Vulcanized resin rubber and vulcanized hard rubber soling materials — Specification
MIL MIL-P-47170A Notice 1-Cancellation
PRIMER, SILICONE RUBBER SEALANT (FUTURE ACQUISITION SHOULD REFER TO COMMERCIAL ITEM DESCRIPTION A-A-59116, PRIMER,SILICONE RUBBER SEALANT.) (S/S BY A-A-59116) (SUPERSEDING MIL-P-47170)
GB/T 17338-1998
Determination of residual acrylonitrile monomer in styrene-acrylonitrile copolymers and rubber-modified acrylonitrile-butadiene-styrene resins and their products used for food packaging
MIL MIL-R-83283A Notice 4-Cancellation
RUBBER SILICONE, HIGH STRENGTH, CABIN PRESSURE SEAL MATERIAL, DIAPHRAGM TYPE (SUPERSEDING MIL-R-83283) (S/S BY SAE-AMS-R-83283)