1甲基环氧乙烷检测标准，1甲基环氧乙烷检测标准标准内容,检测中心-北检（北京）检测技术研究院

YY/T 1302.1-2015

环氧乙烷灭菌的物理和微生物性能要求　第1部分：物理要求
Physical requirements and microbiological performance of ethylene oxide sterilization—Part 1: Physical aspects

【发布单位或类别】 CN-YY行业标准-医药
【发布日期】2015-03-02
【CCS分类】C47公共医疗设备
【ICS分类】11.080.01消毒和灭菌综合

GB 18279.1-2015

医疗保健产品灭菌　环氧乙烷　第1部分：医疗器械灭菌过程的开发、确认和常规控制的要求
Sterilization of health care products—Ethylene oxide—Part 1:Requirements for development,validation and routine control of a sterilization process for medical devices

【发布单位或类别】 CN-GB国家标准
【发布日期】2015-12-10
【CCS分类】C47公共医疗设备
【ICS分类】11.080.01消毒和灭菌综合

T/SDSCCE 031-2022

2-[2-(4-氯苯基)乙基]-2-(1,1-二甲基乙基)-环氧乙烷

【发布单位或类别】 CN-TUANTI团体标准
【发布日期】2022-05-23
【CCS分类】公共医疗设备
【ICS分类】71.100.01化工产品综合

BS DD CEN/ISO TS 11135-2:2008

Sterilization of health care products. Ethylene oxide. Guidance on the application of ISO 11135-1
Sterilization of health care products. Ethylene oxide. Guidance on the application of ISO 11135-1

【发布单位或类别】 GB-BSI英国标准学会
【发布日期】2009-07-31
【CCS分类】医疗器械
【ICS分类】消毒和灭菌综合

SAE AMST81533A

Trichloroethane 1, 1, 1, (Methyl Chloroform) Inhibited, Vapor Degreasing
Trichloroethane 1, 1, 1, (Methyl Chloroform) Inhibited, Vapor Degreasing

【发布单位或类别】 US-SAE美国机动车工程师协会
【发布日期】2007-04-13
【CCS分类】一般有机化工原料
【ICS分类】消毒和灭菌

AAMI TIR14:1997/A1:2004

Contract Sterilization for Ethylene Oxide, Includes Amendment 1
Contract Sterilization for Ethylene Oxide, Includes Amendment 1

【发布单位或类别】 US-AAMI美国医疗器械促进协会
【发布日期】2004-07-15
【CCS分类】医疗器械
【ICS分类】杀虫剂和其他农用化工产品综合

EN ISO 11135:2014/A1:2019

Sterilization of health-care products - Ethylene oxide - Requirements for the development, validation and routine control of a sterilization process for medical devices - Amendment 1: Revision of Annex E, Single batch release (ISO 11135:2014/Amd 1:2018)

【发布单位或类别】 IX-CEN欧洲标准化委员会
【发布日期】2019-11-20
【CCS分类】C47
【ICS分类】11.080.01消毒和灭菌

EN ISO 10993-7:2008/A1:2022

Biological evaluation of medical devices - Part 7: Ethylene oxide sterilization residuals - Amendment 1: Applicability of allowable limits for neonates and infants (ISO 10993-7:2008/Amd 1:2019)

【发布单位或类别】 IX-CEN欧洲标准化委员会
【发布日期】2022-01-12
【CCS分类】C30/49
【ICS分类】11.080消毒和灭菌综合

32018D1463

Council Implementing Decision (EU) 2018/1463 of 28 September 2018 on subjecting the new psychoactive substances N-phenyl-N-[1-(2-phenylethyl)piperidin-4-yl]cyclopropanecarboxamide (cyclopropylfentanyl) and 2-methoxy-N-phenyl-N-[1-(2-phenylethyl)piperidin-4-yl]acetamide (methoxyacetylfentanyl) to control measures

【发布单位或类别】 IX-EURLEX欧洲技术法规
【发布日期】2018-09-28
【CCS分类】G17
【ICS分类】65.100.01表面活性剂及其他助剂

UNE-CEN ISO/TS 11135-2:2009 EX

Sterilization of health care products - Ethylene oxide - Part 2: Guidance on the application of ISO 11135-1 (ISO/TS 11135-2:2008)
Sterilization of health care products - Ethylene oxide - Part 2: Guidance on the application of ISO 11135-1 (ISO/TS 11135-2:2008)

【发布单位或类别】 ES-UNE西班牙标准
【发布日期】2009-09-02
【CCS分类】
【ICS分类】

CSA Z314.2-09

Effective sterilization in health care facilities by the ethylene oxide process, Includes Update No. 1 (2010), Update No. 2 (2010)
Effective sterilization in health care facilities by the ethylene oxide process, Includes Update No. 1 (2010), Update No. 2 (2010)

【发布单位或类别】 CA-CSA加拿大标准协会
【发布日期】2009-03-01
【CCS分类】
【ICS分类】

EN ISO 10993-7:2008/AC:2009

Biological evaluation of medical devices - Part 7: Ethylene oxide sterilization residuals - Technical Corrigendum 1 (ISO 10993-7:2008/Cor 1:2009)

【发布单位或类别】 IX-CEN欧洲标准化委员会
【发布日期】2009-11-15
【CCS分类】C30/49
【ICS分类】11.080

KS P ISO TS 11135-2-2014

보건의료제품 멸균?산화에틸렌?제2부: KS P ISO 11135－1의 적용에 관한 지침
Sterilization of health care products — Ethylene oxide — Part 2: Guidance on the application of ISO 11135－1

【发布单位或类别】 KR-KS韩国标准
【发布日期】2014-12-01
【CCS分类】
【ICS分类】11.080.01

MIL MIL-T-81533A Notice 2-Cancellation

Trichloroethane 1, 1, 1, (Methyl Chloroform) Inhibited, Vapor Degreasing (No S/S Document)
Trichloroethane 1, 1, 1, (Methyl Chloroform) Inhibited, Vapor Degreasing (No S/S Document)

【发布单位或类别】 US-MIL美国军事规范和标准
【发布日期】2016-07-03
【CCS分类】
【ICS分类】

UNE-EN ISO 11135-1:2007

Sterilization of health care products - Ethylene oxide - Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices (ISO 11135-1:2007)
Sterilization of health care products - Ethylene oxide - Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices (ISO 11135-1:2007)

【发布单位或类别】 ES-UNE西班牙标准
【发布日期】2007-10-24
【CCS分类】
【ICS分类】

SAE AMST81533

Trichloroethane 1, 1, 1, (Methyl Chloroform) Inhibited, Vapor Degreasing
Trichloroethane 1, 1, 1, (Methyl Chloroform) Inhibited, Vapor Degreasing

【发布单位或类别】 US-SAE美国机动车工程师协会
【发布日期】2001-04-01
【CCS分类】
【ICS分类】

BS ISO 17280:2015

Surface active agents. Determination of 1,4-dioxan residues in surfactants obtained from epoxyethane by gas chromatography
Surface active agents. Determination of 1,4-dioxan residues in surfactants obtained from epoxyethane by gas chromatography

【发布单位或类别】 GB-BSI英国标准学会
【发布日期】2015-06-30
【CCS分类】
【ICS分类】

ISO 17280:2015

Surface active agents — Determination of 1,4-dioxan residues in surfactants obtained from epoxyethane by gas chromatography
Surface active agents — Determination of 1,4-dioxan residues in surfactants obtained from epoxyethane by gas chromatography

【发布单位或类别】 IX-ISO国际标准化组织
【发布日期】2015-05-26
【CCS分类】
【ICS分类】71.100.40

CSA Z314.9-09(R2013)

Installation, ventilation, and safe use of ethylene oxide sterilizers in health care facilities, Includes Update No. 1 (2010)
Installation, ventilation, and safe use of ethylene oxide sterilizers in health care facilities, Includes Update No. 1 (2010)

【发布单位或类别】 CA-CSA加拿大标准协会
【发布日期】2009-03-01
【CCS分类】
【ICS分类】

DIN EN ISO 11135-1

Sterilization of health care products - Ethylene oxide - Part 1: Requirements for the development, validation and routine control of a sterilization process for medical devices (ISO 11135-1:2007)
Sterilization of health care products - Ethylene oxide - Part 1: Requirements for the development, validation and routine control of a sterilization process for medical devices (ISO 11135-1:2007)

【发布单位或类别】 DE-DIN德国标准化学会
【发布日期】2007-08-01
【CCS分类】
【ICS分类】

1甲基环氧乙烷检测标准

CNAS认证

CMA认证

ISO认证

AAA诚信企业

环氧乙烷灭菌的物理和微生物性能要求 第1部分：物理要求 Physical requirements and microbiological performance of ethylene oxide sterilization—Part 1: Physical aspects

医疗保健产品灭菌 环氧乙烷 第1部分：医疗器械灭菌过程的开发、确认和常规控制的要求 Sterilization of health care products—Ethylene oxide—Part 1:Requirements for development,validation and routine control of a sterilization process for medical devices

2-[2-(4-氯苯基)乙基]-2-(1,1-二甲基乙基)-环氧乙烷

Sterilization of health care products. Ethylene oxide. Guidance on the application of ISO 11135-1 Sterilization of health care products. Ethylene oxide. Guidance on the application of ISO 11135-1

Trichloroethane 1, 1, 1, (Methyl Chloroform) Inhibited, Vapor Degreasing Trichloroethane 1, 1, 1, (Methyl Chloroform) Inhibited, Vapor Degreasing

Contract Sterilization for Ethylene Oxide, Includes Amendment 1 Contract Sterilization for Ethylene Oxide, Includes Amendment 1

Sterilization of health-care products - Ethylene oxide - Requirements for the development, validation and routine control of a sterilization process for medical devices - Amendment 1: Revision of Annex E, Single batch release (ISO 11135:2014/Amd 1:2018)

Biological evaluation of medical devices - Part 7: Ethylene oxide sterilization residuals - Amendment 1: Applicability of allowable limits for neonates and infants (ISO 10993-7:2008/Amd 1:2019)

Sterilization of health care products - Ethylene oxide - Part 2: Guidance on the application of ISO 11135-1 (ISO/TS 11135-2:2008) Sterilization of health care products - Ethylene oxide - Part 2: Guidance on the application of ISO 11135-1 (ISO/TS 11135-2:2008)

Effective sterilization in health care facilities by the ethylene oxide process, Includes Update No. 1 (2010), Update No. 2 (2010) Effective sterilization in health care facilities by the ethylene oxide process, Includes Update No. 1 (2010), Update No. 2 (2010)

Biological evaluation of medical devices - Part 7: Ethylene oxide sterilization residuals - Technical Corrigendum 1 (ISO 10993-7:2008/Cor 1:2009)

보건의료제품 멸균?산화에틸렌?제2부: KS P ISO 11135－1의 적용에 관한 지침 Sterilization of health care products — Ethylene oxide — Part 2: Guidance on the application of ISO 11135－1

Trichloroethane 1, 1, 1, (Methyl Chloroform) Inhibited, Vapor Degreasing (No S/S Document) Trichloroethane 1, 1, 1, (Methyl Chloroform) Inhibited, Vapor Degreasing (No S/S Document)

Trichloroethane 1, 1, 1, (Methyl Chloroform) Inhibited, Vapor Degreasing Trichloroethane 1, 1, 1, (Methyl Chloroform) Inhibited, Vapor Degreasing

Surface active agents. Determination of 1,4-dioxan residues in surfactants obtained from epoxyethane by gas chromatography Surface active agents. Determination of 1,4-dioxan residues in surfactants obtained from epoxyethane by gas chromatography

Surface active agents — Determination of 1,4-dioxan residues in surfactants obtained from epoxyethane by gas chromatography Surface active agents — Determination of 1,4-dioxan residues in surfactants obtained from epoxyethane by gas chromatography

Installation, ventilation, and safe use of ethylene oxide sterilizers in health care facilities, Includes Update No. 1 (2010) Installation, ventilation, and safe use of ethylene oxide sterilizers in health care facilities, Includes Update No. 1 (2010)

相关文章推荐

仪器设备

气相色谱仪

液相色谱仪

质谱仪

原子吸收光谱仪

红外光谱仪

X射线衍射仪

了解我们

检测优势

技术领先

设备先进

团队专业

快速高效

合作客户

需要专业检测服务？

在线咨询工程师

环氧乙烷灭菌的物理和微生物性能要求　第1部分：物理要求
Physical requirements and microbiological performance of ethylene oxide sterilization—Part 1: Physical aspects

医疗保健产品灭菌　环氧乙烷　第1部分：医疗器械灭菌过程的开发、确认和常规控制的要求
Sterilization of health care products—Ethylene oxide—Part 1:Requirements for development,validation and routine control of a sterilization process for medical devices

Sterilization of health care products. Ethylene oxide. Guidance on the application of ISO 11135-1
Sterilization of health care products. Ethylene oxide. Guidance on the application of ISO 11135-1

Trichloroethane 1, 1, 1, (Methyl Chloroform) Inhibited, Vapor Degreasing
Trichloroethane 1, 1, 1, (Methyl Chloroform) Inhibited, Vapor Degreasing

Contract Sterilization for Ethylene Oxide, Includes Amendment 1
Contract Sterilization for Ethylene Oxide, Includes Amendment 1

Sterilization of health care products - Ethylene oxide - Part 2: Guidance on the application of ISO 11135-1 (ISO/TS 11135-2:2008)
Sterilization of health care products - Ethylene oxide - Part 2: Guidance on the application of ISO 11135-1 (ISO/TS 11135-2:2008)

Effective sterilization in health care facilities by the ethylene oxide process, Includes Update No. 1 (2010), Update No. 2 (2010)
Effective sterilization in health care facilities by the ethylene oxide process, Includes Update No. 1 (2010), Update No. 2 (2010)

보건의료제품 멸균?산화에틸렌?제2부: KS P ISO 11135－1의 적용에 관한 지침
Sterilization of health care products — Ethylene oxide — Part 2: Guidance on the application of ISO 11135－1

Trichloroethane 1, 1, 1, (Methyl Chloroform) Inhibited, Vapor Degreasing (No S/S Document)
Trichloroethane 1, 1, 1, (Methyl Chloroform) Inhibited, Vapor Degreasing (No S/S Document)

Trichloroethane 1, 1, 1, (Methyl Chloroform) Inhibited, Vapor Degreasing
Trichloroethane 1, 1, 1, (Methyl Chloroform) Inhibited, Vapor Degreasing

Surface active agents. Determination of 1,4-dioxan residues in surfactants obtained from epoxyethane by gas chromatography
Surface active agents. Determination of 1,4-dioxan residues in surfactants obtained from epoxyethane by gas chromatography

Surface active agents — Determination of 1,4-dioxan residues in surfactants obtained from epoxyethane by gas chromatography
Surface active agents — Determination of 1,4-dioxan residues in surfactants obtained from epoxyethane by gas chromatography

Installation, ventilation, and safe use of ethylene oxide sterilizers in health care facilities, Includes Update No. 1 (2010)
Installation, ventilation, and safe use of ethylene oxide sterilizers in health care facilities, Includes Update No. 1 (2010)