2甲基2丙醇结构式检测标准，2甲基2丙醇结构式检测标准标准内容,检测中心-北检（北京）检测技术研究院

T/SHIA 010-2021

TC-99m MDP骨扫描结构式报告诊断分类

【发布单位或类别】 CN-TUANTI团体标准
【发布日期】2021-12-10
【CCS分类】C50/64卫生
【ICS分类】11.020医学科学和保健装置综合

KS D ISO TR 11762-2019

라이트 게이지 금속용기 — 가스가 주입된 액상 제품용 둥근 오픈탑 캔 — 구조에 따른 캔 사이즈 분류
Light gauge metal containers - Round open-top cans for liquid product with added gas- Classification of can sizes by construction type

【发布单位或类别】 KR-KS韩国标准
【发布日期】2019-10-31
【CCS分类】建筑工程施工机械
【ICS分类】55.120罐、听、管

GB/T 33941.2-2017

土方机械结构件应力测试方法第2部分：轮胎式装载机机架
Earth-moving machinery—Structure stress test method—Part 2: Frame of wheeled loaders

【发布单位或类别】 CN-GB国家标准
【发布日期】2017-07-12
【CCS分类】P97广播、电视网综合
【ICS分类】53.100土方机械

GY/T 322.2-2019

网络音频应用的开放式控制架构第 2 部分：类结构

【发布单位或类别】 CN-GY行业标准-广播电影电视
【发布日期】2019-04-28
【CCS分类】M60电子计算机应用
【ICS分类】33.160.01音频、视频和视听系统综合

GB/T 18759.2-2006

机械电气设备开放式数控系统第2部分：体系结构
Electrical equipment of machines - Open numerical control system - Part 2: System architecture

【发布单位或类别】 CN-GB国家标准
【发布日期】2006-10-16
【CCS分类】J07电气装置用结构件
【ICS分类】29.020电气工程综合

QJ 1909.2A-2008

模件式机柜结构型式及尺寸第2部分:框的结构及尺寸系列
The structure type and dimension order of composite cabinet Part 2:The structure and dimension order of frame

【发布单位或类别】 CN-QJ行业标准-航天
【发布日期】2008-03-17
【CCS分类】V27起重机械
【ICS分类】49.060航空航天用电气设备和系统

GB/T 25851.2-2023

流动式起重机起重机性能的试验测定第2部分：静载荷作用下的结构能力
Mobile cranes—Experimental determination of crane performance—Part 2：Structural competence under static loading

【发布单位或类别】 CN-GB国家标准
【发布日期】2023-11-27
【CCS分类】J80木材采运机械与设备
【ICS分类】53.020.20起重机

GB/T 20448.2-2016

自行式林业机械滚翻保护结构实验室试验和性能要求第2部分：回转平台上安装驾驶室和起重臂的机械
Self-propelled machinery for forestry—Laboratory tests and performance requirements for roll-over protective structures—Part 2: Machines having a rotating platform with a cab and boom on the platform

【发布单位或类别】 CN-GB国家标准
【发布日期】2016-02-24
【CCS分类】B96通用零部件
【ICS分类】65.060.80林业设备

20233856-T-604

机械电气设备开放式数控系统第2部分：体系结构
Electrical equipment of machines-Open numerical control system Part 2: System Architecture

【发布单位或类别】 CN-PLAN国家标准计划
【发布日期】2023-12-28
【CCS分类】化工
【ICS分类】29.020电气工程综合

ISO 10984-2:2009

Timber structures — Dowel-type fasteners — Part 2: Determination of embedding strength
Timber structures — Dowel-type fasteners — Part 2: Determination of embedding strength

【发布单位或类别】 IX-ISO国际标准化组织
【发布日期】2009-07-30
【CCS分类】通用机械与设备
【ICS分类】91.080.20木结构

EN 15048-2:2016

Non-preloaded structural bolting assemblies - Part 2: Fitness for purpose

【发布单位或类别】 IX-CEN欧洲标准化委员会
【发布日期】2016-07-20
【CCS分类】J10/29
【ICS分类】21.060.01紧固件综合

T/CSTM 00086-2019

成核剂 2,2'-亚甲基-双（4,6-二叔丁基苯基）磷酸碱式铝与脂肪酸金属皂复配物

【发布单位或类别】 CN-TUANTI团体标准
【发布日期】2019-11-07
【CCS分类】G
【ICS分类】71.100.40表面活性剂及其他助剂

MIL MIL-DTL-7885/8C

RIVETS, BLIND, STRUCTURAL, UNIVERSAL PROTRUDING HEAD, NICKE-COPPER ALLOY SLEEVE, MECHANICALLY LOCKED 15-7PH CRES SPINDLE OVERSIZE DIAMETER (TYPE I, STYLE B, CLASS 1) (SUPERSEDING MIL-R-7885/8B) (S/S BY NAS9310-3)
RIVETS, BLIND, STRUCTURAL, UNIVERSAL PROTRUDING HEAD, NICKE-COPPER ALLOY SLEEVE, MECHANICALLY LOCKED 15-7PH CRES SPINDLE OVERSIZE DIAMETER (TYPE I, STYLE B, CLASS 1) (SUPERSEDING MIL-R-7885/8B) (S/S BY NAS9310-3)

【发布单位或类别】 US-MIL美国军事规范和标准
【发布日期】1997-07-29
【CCS分类】
【ICS分类】识别卡和有关装置

KS X 6925-2-2014(2024)

비접촉식 선후불 IC카드 — 지불 단말기 — 제2부: 논리적 구조
Contactless pre-paid/post pay IC card — Purchase terminal — Part 2: Logical structures

【发布单位或类别】 KR-KS韩国标准
【发布日期】2014-12-31
【CCS分类】
【ICS分类】35.240.15识别卡和有关装置

KS X 6925-2-2014(2019)

비접촉식 선후불 IC카드 — 지불 단말기 — 제2부: 논리적 구조
Contactless pre-paid/post pay IC card — Purchase terminal — Part 2: Logical structures

【发布单位或类别】 KR-KS韩国标准
【发布日期】2014-12-31
【CCS分类】
【ICS分类】35.240.15橡胶和塑料制品

DIN EN 280-2

Mobile elevating work platforms - Part 2: Additional safety requirements for load lifting appliances on the extending lifting structure and work platform
Mobile elevating work platforms - Part 2: Additional safety requirements for load lifting appliances on the extending lifting structure and work platform

【发布单位或类别】 DE-DIN德国标准化学会
【发布日期】2022-05-01
【CCS分类】
【ICS分类】其他起重设备

KS M 3604-2-2019

재활용 폴리에틸렌 정화조 구성 부품 — 제2부: 접합형
Recycled polyethylene construction parts of water closet wastes disposal facilities — Part 2: Assembly type

【发布单位或类别】 KR-KS韩国标准
【发布日期】2019-11-11
【CCS分类】
【ICS分类】83.140农业拖拉机和牵引车辆

MIL MIL-DTL-3786/4N

Switch, Rotary, Closed Construction, 2 Amperes, Low Level, Positive Shaft Grounding, Flux Seal, Style SR04
Switch, Rotary, Closed Construction, 2 Amperes, Low Level, Positive Shaft Grounding, Flux Seal, Style SR04

【发布单位或类别】 US-MIL美国军事规范和标准
【发布日期】2019-07-26
【CCS分类】
【ICS分类】

EN 280-2:2022

Mobile elevating work platforms - Part 2: Additional safety requirements for load lifting appliances on the extending lifting structure and work platform

【发布单位或类别】 IX-CEN欧洲标准化委员会
【发布日期】2022-02-16
【CCS分类】J70/89
【ICS分类】53.020.99

KS B ISO 12003-2-2022

농림업용 트랙터 협폭 트랙터의 전도보호구조물 제 2 부 : 후방 장착 전도보호구조물
Tractors for agriculture and forestry Roll over protective structures on narrow tractors Part 2: Rear mounted ROPS

【发布单位或类别】 KR-KS韩国标准
【发布日期】2022-12-23
【CCS分类】
【ICS分类】65.060.10

2甲基2丙醇结构式检测标准

TC-99m MDP骨扫描结构式报告诊断分类

라이트 게이지 금속용기 — 가스가 주입된 액상 제품용 둥근 오픈탑 캔 — 구조에 따른 캔 사이즈 분류 Light gauge metal containers - Round open-top cans for liquid product with added gas- Classification of can sizes by construction type

土方机械 结构件应力测试方法 第2部分：轮胎式装载机机架 Earth-moving machinery—Structure stress test method—Part 2: Frame of wheeled loaders

网络音频应用的开放式控制架构 第 2 部分：类结构

机械电气设备 开放式数控系统 第2部分：体系结构 Electrical equipment of machines - Open numerical control system - Part 2: System architecture

模件式机柜结构型式及尺寸 第2部分:框的结构及尺寸系列 The structure type and dimension order of composite cabinet Part 2:The structure and dimension order of frame

流动式起重机 起重机性能的试验测定 第2部分：静载荷作用下的结构能力 Mobile cranes—Experimental determination of crane performance—Part 2：Structural competence under static loading

机械电气设备 开放式数控系统 第2部分：体系结构 Electrical equipment of machines-Open numerical control system Part 2: System Architecture

Timber structures — Dowel-type fasteners — Part 2: Determination of embedding strength Timber structures — Dowel-type fasteners — Part 2: Determination of embedding strength

Non-preloaded structural bolting assemblies - Part 2: Fitness for purpose

成核剂 2,2'-亚甲基-双（4,6-二叔丁基苯基）磷酸碱式铝与脂肪酸金属皂复配物

비접촉식 선후불 IC카드 — 지불 단말기 — 제2부: 논리적 구조 Contactless pre-paid/post pay IC card — Purchase terminal — Part 2: Logical structures

비접촉식 선후불 IC카드 — 지불 단말기 — 제2부: 논리적 구조 Contactless pre-paid/post pay IC card — Purchase terminal — Part 2: Logical structures

재활용 폴리에틸렌 정화조 구성 부품 — 제2부: 접합형 Recycled polyethylene construction parts of water closet wastes disposal facilities — Part 2: Assembly type

Switch, Rotary, Closed Construction, 2 Amperes, Low Level, Positive Shaft Grounding, Flux Seal, Style SR04 Switch, Rotary, Closed Construction, 2 Amperes, Low Level, Positive Shaft Grounding, Flux Seal, Style SR04

Mobile elevating work platforms - Part 2: Additional safety requirements for load lifting appliances on the extending lifting structure and work platform

농림업용 트랙터 협폭 트랙터의 전도보호구조물 제 2 부 : 후방 장착 전도보호구조물 Tractors for agriculture and forestry Roll over protective structures on narrow tractors Part 2: Rear mounted ROPS

北检院部分仪器展示

라이트 게이지 금속용기 — 가스가 주입된 액상 제품용 둥근 오픈탑 캔 — 구조에 따른 캔 사이즈 분류
Light gauge metal containers - Round open-top cans for liquid product with added gas- Classification of can sizes by construction type

土方机械结构件应力测试方法第2部分：轮胎式装载机机架
Earth-moving machinery—Structure stress test method—Part 2: Frame of wheeled loaders

网络音频应用的开放式控制架构第 2 部分：类结构

机械电气设备开放式数控系统第2部分：体系结构
Electrical equipment of machines - Open numerical control system - Part 2: System architecture

模件式机柜结构型式及尺寸第2部分:框的结构及尺寸系列
The structure type and dimension order of composite cabinet Part 2:The structure and dimension order of frame

流动式起重机起重机性能的试验测定第2部分：静载荷作用下的结构能力
Mobile cranes—Experimental determination of crane performance—Part 2：Structural competence under static loading

机械电气设备开放式数控系统第2部分：体系结构
Electrical equipment of machines-Open numerical control system Part 2: System Architecture

Timber structures — Dowel-type fasteners — Part 2: Determination of embedding strength
Timber structures — Dowel-type fasteners — Part 2: Determination of embedding strength

비접촉식 선후불 IC카드 — 지불 단말기 — 제2부: 논리적 구조
Contactless pre-paid/post pay IC card — Purchase terminal — Part 2: Logical structures

비접촉식 선후불 IC카드 — 지불 단말기 — 제2부: 논리적 구조
Contactless pre-paid/post pay IC card — Purchase terminal — Part 2: Logical structures

재활용 폴리에틸렌 정화조 구성 부품 — 제2부: 접합형
Recycled polyethylene construction parts of water closet wastes disposal facilities — Part 2: Assembly type

Switch, Rotary, Closed Construction, 2 Amperes, Low Level, Positive Shaft Grounding, Flux Seal, Style SR04
Switch, Rotary, Closed Construction, 2 Amperes, Low Level, Positive Shaft Grounding, Flux Seal, Style SR04

농림업용 트랙터 협폭 트랙터의 전도보호구조물 제 2 부 : 후방 장착 전도보호구조물
Tractors for agriculture and forestry Roll over protective structures on narrow tractors Part 2: Rear mounted ROPS