铅笔硬度检测标准

铅笔硬度检测标准相关信息

GB/T 6739-2022 色漆和清漆 铅笔法测定漆膜硬度
简介：
信息：ICS：87.040 CCS：G50 发布：2022-12-30 实施：2023-07-01

ASTM D3363-05(2011)e2 铅笔试验法测定薄膜硬度的标准试验方法
简介：
信息：ICS：87.040 CCS： 发布：2011-06-01 实施：

BS 3900-E19-1999 涂料的试验方法.通过铅笔试验对涂膜硬度的测定
简介：1 This International Standard is one of a series of standards dealing with the sampling and testing of paints, varnishes and related products.It specifies a method for determining the film hardness by pushing pencils of known hardness over the film.The test can be performed on a single coating of a paint, varnish or related product, or on the upper layer of a multicoat system.2 This rapid, inexpensive test has been found to be useful in comparing the pencil hardness of different coatings.It is more useful in providing relative ratings for a series of coated panels exhibiting significant differences in pencil hardness.The method is applicable only to smooth surfaces.
信息：ICS：87.040 CCS：G50 发布：1999-02-15 实施：1999-02-15

GB/T 6739-2006 色漆和清漆.铅笔法测定漆膜硬度
简介：1.1 本标准是有关色漆、清漆及相关产品的取样和试验的系列标准之一。本标准规定了一种通过在漆膜上推压已知硬度标号的铅笔来测定漆膜硬度的方法。本试验可以在色漆、清漆及相关产品的单涂层上进行,也可以在多涂层体系的最上层进行。1.2 这种快速、经济的试验方法用于比较不同涂层的铅笔硬度是有效的。本方法对于铅笔硬度有明显差异的一系列已涂漆试板提供相对等级评定则更为有效。本方法仅适用于光滑表面。
信息：ICS：87.040 CCS：G50 发布：2006-12-29 实施：2007-06-01

ASTM D3363-05(2011)e1 通过铅笔测试的薄膜硬度的标准测试方法
简介：
信息：ICS：87.040 CCS： 发布：2011-06-01 实施：

ISO 15184-1998 色漆和清漆 使用铅笔测定薄膜硬度
简介：1 This International Standard is one of a series of standards dealing with the sampling and testing of paints, varnishes and related products.It specifies a method for determining the film hardness by pushing pencils of known hardness over the film.The test can be performed on a single coating of a paint, varnish or related product, or on the upper layer of a multicoat system.2 This rapid, inexpensive test has been found to be useful in comparing the pencil hardness of different coatings.It is more useful in providing relative ratings for a series of coated panels exhibiting significant differences in pencil hardness.The method is applicable only to smooth surfaces.
信息：ICS：87.040 CCS：G51 发布：1998-11 实施：

GB/T 6739-1996 涂膜硬度铅笔测定法
简介： 本标准规定了采用已知硬度标号的铅笔刮划涂膜，以铅笔的硬度标号表示涂膜硬度的测定方法。 本标准规定了A法和B法两种方法，A法采用试验机法，B法采用手动法。 本标准适用于涂膜硬度的测定。
信息：ICS：87.010 CCS：G50 发布：1996-10-28 实施：1997-06-01

GOST R 54586-2011 涂装材料.铅笔试验测定漆膜硬度方法
简介：
信息：ICS：87.040 CCS： 发布：2011-01-01 实施：2012-09-01

ISO 15184:1998 色漆和清漆.用铅笔试验测定漆膜硬度
简介：
信息：ICS：87.040 CCS： 发布：1998-10-29 实施：

GB/T 6739-1986 涂膜硬度铅笔测定法
简介：
信息：ICS： CCS： 发布： 实施：

TIS 2270-2006 色漆和清漆.铅笔法测定漆膜硬度
简介：
信息：ICS：87.040 CCS： 发布：2006-03-24 实施：

AS/NZS 1580.405.1-1996 油漆及类似材料 测试方法 涂膜铅笔硬度确定
简介：Provides a procedure for determining the relative hardness of paint film using pencil leads of a designated hardness.
信息：ICS：87.040 CCS： 发布：1995-09-25 实施：1996-01-05

ASTM D3363-22 铅笔试验法测定薄膜硬度的标准试验方法
简介：
信息：ICS：25.220.60 CCS： 发布：2022-06-01 实施：

ASTM D3363-05 通过铅笔测试的薄膜硬度的标准测试方法
简介：
信息：ICS：87.040 CCS： 发布：2005-01-01 实施：

NEN 5350-1970 色漆．表面硬度的铅笔法测定
简介：De norm is van toepassing bij gladde verflagen op een vlakke, stijve ondergrond. Op lagen die grove pigmenten of vulstoffen bevatten, zoals b.v. anti-sliplagen, kan de methode niet worden toegepast.OpmerkingDe beoordeling van het al of niet beschadigd zijn van de verflaag is enigszins afhankelijk van de beoordelende persoon.De proef is daarom voornamelijk geschikt voor vergelijkende proeven door één persoon met één serie potloden.
信息：ICS： CCS： 发布：1970-10-1 实施：

ISO 15184:2020 油漆和清漆 - 通过铅笔测试测定薄膜硬度
简介：
信息：ICS：87.040 CCS： 发布：2020-01-08 实施：

ASTM D3363-2005 铅笔试验法测定涂膜硬度的标准试验方法
简介：Pencil hardness measurements have been used by the coatings industry for many years to determine the hardness of clear and pigmented organic coating films. This test method has also been used to determine the cure of these coatings, especially when forced dried using heat. This test method is especially useful in developmental work and in production control testing in a single laboratory. It should be recognized that the results obtained may vary between different laboratories when different pencils as well as panels are used. Every effort should be made to standardize the hardness of the lead used and the technique followed. If this test method is used as a basis for purchase agreement, maximum precision will be achieved if a given set of referee pencils be agreed upon between the purchaser and the seller.1.1 This test method covers a procedure for rapid, inexpensive determination of the film hardness of an organic coating on a substrate in terms of drawing leads or pencil leads of known hardness.1.2 This test method is similar in content (but not technically equivalent) to ISO 15184.1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS：87.040 (Paints and varnishes) CCS：G50 发布：2005 实施：

VSM 18703.1-1969 使用铅笔确定漆包绝缘线的绝缘硬度方法
简介：
信息：ICS： CCS： 发布：1969-1-1 实施：

DIN EN 13523-4-2014 涂覆金属卷材.试验方法.第4部分:铅笔硬度.德文版本EN 13523-4-2014
简介：
信息：ICS：25.220.60 CCS：H10 发布：2014-10-01 实施：

ASTM D3363-2005(2011)e2 铅笔实验测定漆膜硬度的标准试验方法
简介： Pencil hardness measurements have been used by the coatings industry for many years to determine the hardness of clear and pigmented organic coating films. This test method has also been used to determine the cure of these coatings, especially when forced dried using heat. This test method is especially useful in developmental work and in production control testing in a single laboratory. It should be recognized that the results obtained may vary between different laboratories when different pencils as well as panels are used. Every effort should be made to standardize the hardness of the lead used and the technique followed. If this test method is used as a basis for purchase agreement, maximum precision will be achieved if a given set of referee pencils be agreed upon between the purchaser and the seller. 1.1 This test method covers a procedure for rapid, inexpensive determination of the film hardness of an organic coating on a substrate in terms of drawing leads or pencil leads of known hardness. 1.2 This test method is similar in content (but not technically equivalent) to ISO 15184. 1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS：87.040 CCS：G50 发布：2005 实施：

MSZ 9640/2.lap-1965 涂料和涂料系统检测．硬度检测用铅笔检查
简介：
信息：ICS： CCS： 发布：1965 实施：

BS EN 13523-4-2014 卷材覆层金属.试验方法.铅笔划磨硬度
简介：
信息：ICS：17.040.20;25.220.60 CCS：A29 发布：2014-08-31 实施：2014-08-31

ASTM D3363-2005(2011)e1 铅笔试验测定漆膜硬度的标准试验方法
简介：Pencil hardness measurements have been used by the coatings industry for many years to determine the hardness of clear and pigmented organic coating films. This test method has also been used to determine the cure of these coatings, especially when forced dried using heat. This test method is especially useful in developmental work and in production control testing in a single laboratory. It should be recognized that the results obtained may vary between different laboratories when different pencils as well as panels are used. Every effort should be made to standardize the hardness of the lead used and the technique followed. If this test method is used as a basis for purchase agreement, maximum precision will be achieved if a given set of referee pencils be agreed upon between the purchaser and the seller.1.1 This test method covers a procedure for rapid, inexpensive determination of the film hardness of an organic coating on a substrate in terms of drawing leads or pencil leads of known hardness. 1.2 This test method is similar in content (but not technically equivalent) to ISO 15184. 1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS：87.040 (Paints and varnishes) CCS：G50 发布：2005 实施：

ISO 15184-2020 色漆和清漆.用铅笔试验测定漆膜硬度
简介：
信息：ICS：87.040 CCS： 发布：0000-00-00 实施：0000-00-00

NF T37-001-4-2014 镀层盘材金属.试验方法.第4部分:铅笔硬度
简介：
信息：ICS：25.220.60;87.020 CCS：A29 发布：2014-08-30 实施：2014-08-30

ASTM D3363-2005(2011) 铅笔试验法测定涂膜硬度的标准试验方法
简介：Pencil hardness measurements have been used by the coatings industry for many years to determine the hardness of clear and pigmented organic coating films. This test method has also been used to determine the cure of these coatings, especially when forced dried using heat. This test method is especially useful in developmental work and in production control testing in a single laboratory. It should be recognized that the results obtained may vary between different laboratories when different pencils as well as panels are used. Every effort should be made to standardize the hardness of the lead used and the technique followed. If this test method is used as a basis for purchase agreement, maximum precision will be achieved if a given set of referee pencils be agreed upon between the purchaser and the seller.1.1 This test method covers a procedure for rapid, inexpensive determination of the film hardness of an organic coating on a substrate in terms of drawing leads or pencil leads of known hardness. 1.2 This test method is similar in content (but not technically equivalent) to ISO 15184. 1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS：87.040 (Paints and varnishes) CCS：G50 发布：2005 实施：

ASTM D3363-2005(R2011)(E2011)(E2012) 铅笔试验法测定薄膜硬度的标准试验方法
简介：
信息：ICS：25.220.60 CCS： 发布：0000-00-00 实施：0000-00-00

EN 13523-4-2014 线圈包覆金属.测试方法.第4部分:铅笔硬度
简介：This part of EN 13523 describes the procedure to assess the relative hardness of an organic coating on a metallic substrate, by means of pencils of known hardness. Smooth surfaces will give more accurate results but the method is also applicable for textured surfaces. The more pronounced the texture, the greater the unreliability of results.
信息：ICS：25.220.60 CCS：H20 发布：2014-07 实施：

ASTM D3363-2005(2011)e2 铅笔实验测定漆膜硬度的标准试验方法
简介：Pencil hardness measurements have been used by the coatings industry for many years to determine the hardness of clear and pigmented organic coating films. This test method has also been used to determine the cure of these coatings, especially when forced dried using heat. This test method is especially useful in developmental work and in production control testing in a single laboratory. It should be recognized that the results obtained may vary between different laboratories when different pencils as well as panels are used. Every effort should be made to standardize the hardness of the lead used and the technique followed. If this test method is used as a basis for purchase agreement, maximum precision will be achieved if a given set of referee pencils be agreed upon between the purchaser and the seller.1.1 This test method covers a procedure for rapid, inexpensive determination of the film hardness of an organic coating on a substrate in terms of drawing leads or pencil leads of known hardness. 1.2 This test method is similar in content (but not technically equivalent) to ISO 15184. 1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS：87.040 (Paints and varnishes) CCS：G50 发布：2005 实施：

ASTM D3363-20 通过铅笔测试的薄膜硬度的标准测试方法
简介：
信息：ICS：87.040 CCS：/ 发布：0000-00-00 实施：0000-00-00

KS M ISO 15184-2013 颜料和清漆.使用铅笔试验测定薄膜硬度
简介：이 표준은 경도를 알고 있는 연필로 도막 위를 그으면서 도막의 경도를 측정하는 방법에 대하여 규정한다.이 시험방법은 도료와 바니시, 그리고 관련 제품의 단일 도막이나 또는 다중 도장 시스템의 상층 도막에 적용할 수 있다.이 신속한 시험방법은 서로 다른 도막의 연필 경도를 비교하는 것에는 유용하지 않다. 이 방법은 연필 경도 면에서 뚜렷한 차이를 보여 주는 일련의 도장된 판에 대하여 상대적 등급을 매기는 데 더욱유용하다.이 방법은 도장면이 평탄한 표면에만 적용할 수 있다.
信息：ICS：87.040 CCS：G51 发布：2013-12-30 实施：2013/12/30

KS M ISO 15184-2002 涂料和清漆.使用铅笔试验测定薄膜硬度
简介：1.1 이 규격은 도막 위를 경도를 알고 있는 연필로 그으면서 도막의 경도를 측정하는
信息：ICS：87.04 CCS：G51 发布：2002-12-31 实施：2002-12-31

KS M ISO 15184-2013 颜料和清漆.使用铅笔试验测定薄膜硬度
简介：이 표준은 경도를 알고 있는 연필로 도막 위를 그으면서 도막의 경도를 측정하는 방법에 대하여 규정한다.이 시험방법은 도료와 바니시, 그리고 관련 제품의 단일 도막이나 또는 다중 도장 시스템의 상층 도막에 적용할 수 있다.이 신속한 시험방법은 서로 다른 도막의 연필 경도를 비교하는 것에는 유용하지 않다. 이 방법은 연필 경도 면에서 뚜렷한 차이를 보여 주는 일련의 도장된 판에 대하여 상대적 등급을 매기는 데 더욱유용하다.이 방법은 도장면이 평탄한 표면에만 적용할 수 있다.
信息：ICS：87.040 CCS：G51 发布：2013-12-30 实施：2013/12/30

JIS K5600-5-4 ERRATUM 2-2002 涂料试验方法.第5部分:薄膜的机械特性.第4节:刮擦硬度(铅笔法)(勘误1)
简介：
信息：ICS： CCS：G50 发布：2002-04-10 实施：

KS M ISO 15184-2013(2018) 色漆和清漆涂膜硬度的铅笔法测定
简介：
信息：ICS：87.040 CCS： 发布：2013-12-30 实施：

DIN EN 13523-4-2001 涂覆金属卷材.试验方法.第4部分:铅笔硬度
简介：The document describes the procedure for determining the relative hardness of an organic coating on a metallic substrate, by means of pencils of know hardness. Smooth surfaces will give more accurate results but the method is also applicable for textured surfaces. The more pronounced the texture, the greater the unreliability of results.
信息：ICS：25.220.60 CCS：H10 发布：2001-12 实施：

DIN EN ISO 15184-2013 涂料和清漆. 铅笔试验测定膜硬度 (ISO 15184-2012); 德文版本EN ISO 15184-2012
简介：
信息：ICS：87.040 CCS：G50 发布：2013-02 实施：

FORD FLTM BI 151-01-2001 漆膜的铅笔硬度;替代FLTM EU-BI 051-01［替代:FORD FLTM EU-BI 051-01］
简介：
信息：ICS： CCS： 发布：2001-03-20 实施：

BS EN ISO 15184-2012 涂料和清漆.铅笔试验测定膜硬度
简介：
信息：ICS：87.040 CCS：G51 发布：2012-11-30 实施：2012-11-30

BS EN 13523-4-2001 卷材覆层金属.试验方法.铅笔划磨硬度
简介：This Part of EN 13523 describes the procedure for determining the relative hardness of an organic coating on a metallic substrate, by means of pencils of known hardness.Smooth surfaces will give more accurate results but the method is also applicable for textured surfaces. The more pronounced the texture, the greater the unreliability of results.
信息：ICS：25.220.60 CCS：A29 发布：2001-03-15 实施：2001-03-15

NF T30-126-2012 涂料和清漆. 采用铅笔试验测定膜硬度
简介：
信息：ICS：87.040 CCS：G50 发布：2012-11-01 实施：2012-11-24

EN 13523-4-2001 涂覆金属卷材的试验方法.第4部分:铅笔硬度
简介：This part of EN 13523 describesThe procedure for determiningmetallic substrate, by means of pencils of known hardness.Smooth surfaces will give more accurate results butThe methodpronouncedThe texture,The greaterThe unreliability of results.the relative hardness of an organic coating on ais also applicable for textured surfaces.The more
信息：ICS：25.220.60 CCS： 发布：2001-01-01 实施：

ISO 15184:2012 色漆和清漆——铅笔法测定薄膜硬度
简介：
信息：ICS：87.040 CCS： 发布：2012-10-03 实施：

JIS K5600-5-4 ERRATUM 1-2000 涂料的试验方法.第5部分:涂层膜的机械特性.第4节:刮痕硬度(铅笔方法)(勘误 1)
简介：
信息：ICS： CCS：G50 发布：2000-04-10 实施：

ISO 15184-2012 涂料和清漆.铅笔试验测定膜硬度
简介：
信息：ICS：87.040 CCS：G51 发布：2012-10 实施：

ASTM D3363-00 通过铅笔测试的薄膜硬度的标准测试方法
简介：
信息：ICS：87.040 CCS： 发布：2000-03-10 实施：

EN ISO 15184-2012 涂料和清漆.铅笔试验测定膜硬度
简介：This International Standard specifies a method for determining the film hardness by pushing pencils of knownhardness over the film.The test can be performed on a single coating of a paint, varnish or related product, or on the upper layer of amulti-coat system.This rapid test has not been found to be useful in comparing the pencil hardness of different coatings. It is moreusefulinprovidingrelativeratingsforaseriesofcoatedpanelsexhibitingsignificantdifferencesinpencilhardness.The method is applicable only to smooth surfaces.
信息：ICS：87.040 CCS： 发布：2012 实施：

ASTM D3363-2000 铅笔试验测定漆膜硬度的标准试验方法
简介：1.1 This test method covers a procedure for rapid, inexpensive determination of the film hardness of an organic coating on a substrate in terms of drawing leads or pencil leads of known hardness. 1.2 This standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS：87.040 (Paints and varnishes) CCS：G50 发布：2000 实施：

ASTM D3363-05(2011) 通过铅笔测试的薄膜硬度的标准测试方法
简介：
信息：ICS：87.040 CCS： 发布：2011-06-01 实施：

JIS K5600-5-4-1999 涂料试验方法:第5部分:膜的机械性能.第4节:刮痕硬度(铅笔法)
简介：1.1この規格は，塗料及び関運製品の試料採取・試験に関する一連の規格のーつであり，既知の硬さの鉛筆を塗膜に押しつけて塗膜硬度を測定する方法を規定する。 この試験は，塗料類の単一塗膜，又は多層塗膜系の上層膜に対して適用できる。1.2この迅速方法は，低費用であり，異なる塗膜の鉛筆硬度を比較するのに有用であることが認められていた。 この方法は，鉛筆硬度に著しい差のある一連の塗板の相対的等級付けに最適である。 この方法は，平坦面だけに適用できる。
信息：ICS：87.040 CCS：G50 发布：1999-04-20 实施：