热老化性能检测标准

热老化性能检测标准相关信息

T/ZNL 001-2021 电动汽车充电电缆抗热老化性能检测方法 热重分析法
简介：本文件规定了电动汽车充电用电缆的绝缘、护套材料抗热老化性能要求、热重分析试验方法等内容。本文件适用于电动汽车传导充电连接装置用额定电压交流450/750V及以下、直流1.0kV及以下充电用电缆。
信息：ICS：29.020 CCS：D4420 发布：2021-07-05 实施：2022-11-28

JIS K6257-2017 硫化或热塑性橡胶.热老化性能的测定
简介：
信息：ICS：83.060 CCS：G34 发布：2017-10-20 实施：

JIS K6257-2017 硫化或热塑性橡胶.热老化性能的测定
简介：
信息：ICS：83.060 CCS：G34 发布：2017-10-20 实施：

JIS K6400-8-2014 挠性多孔聚合材料.物理性能.第8部分:热老化性能的测定
简介：
信息：ICS：83.100 CCS：G31 发布：2014-03-20 实施：

JIS K6400-8-2014 挠性多孔聚合材料.物理性能.第8部分:热老化性能的测定
简介：
信息：ICS：83.100 CCS：G31 发布：2014-03-20 实施：

JIS K6257-2010 硫化或热塑性橡胶.热老化性能的测定
简介：This Japanese Industrial Standard specifies the determination method of heat ageing properties of vulcanized rubber and thermoplastic rubber according to the accelerated ageing test and/or the heat resistance test. The test methods include the following Method A and Method B.
信息：ICS：83.060 CCS：G34 发布：2010-04-20 实施：

NF P18-653-2-2010 集料热性能和老化性能用试验.第2部分:硫酸镁试验
简介：
信息：ICS：91.100.15 CCS：Q13 发布：2010-04-01 实施：2010-04-03

NF P18-653-4-2008 集料的热性能和老化性能试验.第4部分:干缩率测定
简介：
信息：ICS：91.100.15 CCS：Q13 发布：2008-06-01 实施：2008-06-07

BS EN 1367-1-2007 集料热性能和老化性能试验.耐冻性和耐融性的测定
简介：This European Standard specifies a test method which provides information on how an aggregatebehaves when it is subjected to the cyclic action of freezing and thawing.NOTE The stresses on aggregates due to frost depend, amongst other factors, on the degree of watersaturation as well as the rate of cooling.The results provide a means for assessing an aggregate's resistance to this form of weathering.The test is applicable to aggregates having a particle size between 4 mm and 63 mm.
信息：ICS：91.100.30 CCS：Q13 发布：2007-09-28 实施：2007-09-28

EN 1367-1-2007 集料热性能和老化性能试验.第1部分:耐冻性和耐融性的测定
简介：This European Standard specifies a test method which provides information on how an aggregate behaves when it is subjected to the cyclic action of freezing and thawing. The stresses on aggregates due to frost depend, amongst other factors, on the degree of water saturation as well as the rate of cooling. The results provide a means for assessing an aggregate's resistance toThis form of weathering. The test is applicable to aggregates having a particle size between 4 mm and 63 mm.
信息：ICS：91.100.30 CCS： 发布：2007-03-01 实施：

JIS K6257-2003 硫化或热塑性橡胶.热老化性能的测定
简介：この規格は，加硫ゴム及び熱可塑性ゴム(以下，加硫ゴムという。)の熱老化特性を促進老化試験及び/又は熱抵抗性試験によって求める方法について規定する。
信息：ICS：83.060 CCS：G34 发布：2003-06-20 实施：

FORD FLTM BN 113-03-2001 聚合物涂层织物的伸展热老化性能
简介：
信息：ICS： CCS： 发布：2001-09-24 实施：

IEC 60216-4-2-2000 电气绝缘材料 耐热性能 第4-2部分:热老化烘箱 最高至300℃的精密烘炉
简介：This part of IEC 60216 covers minimum performance requirements for ventilated and electrically heated precision ovens for thermal endurance evaluation of electrical insulating materials and other appropriate applications. It covers ovens designed to operate over all or part of the temperature range from 20 K above room temperature up to 300 ℃.Two possible methods of achieving the required performance are described:a) where the required performance is achieved by precise control of temperature in a simple single chamber oven, i.e. upgraded versions of ovens conforming to IEC 60216-4-1, and, otherwise,b) where the required performance is achieved by utilizing a second chamber (iso-box), mounted within the chamber of a single-chamber oven, the purpose of which is to reduce the magnitude of any temperature changes to an acceptable level whilst maintaining the required levels of air change and circulation.NOTE 1 Experience has shown that employment of an iso-box is an economical and practical means of meeting the requirements for a precision oven.NOTE 2 It is recommended that a precision oven rather than a standard oven is used when the expected halving interval is less than 10 K (20 kh to 10 kh) in order to increase the precision of the measured temperature index and halving interval to a reasonable level.
信息：ICS：25.180.10;29.035.01 CCS：K15 发布：2000-07 实施：

BS ISO 11561-1999 热绝缘材料的老化.闭孔塑料耐热性能的长期变化量的测定(加速实验室试验方法)
简介：This International Standard specifies two laboratory test methods, based on slicing and scaling techniques, to determine the long-term changes in the thermal resistance of closed-cell (normally 90 %) cellular plastic materials that contain gases which, through diffusion processes, affect the properties of a foam with time.Using standard methods for the measurement of thermal resistance, method A consists of periodic measurements performed over a short time interval on thin specimens conditioned in a controlled ambient temperature environment. The results of relative change with time are used in conjunction with a mathematical technique to derive the thermal resistance of greater thicknesses of the material as a function of time.Method B describes a simple test to determine a conservative design life-time value (25 years arid longer) for an unfaced, closed-cell, cellular plastic product. This method is limited currently to unfaced homogeneous materials. For this method, multiple specimens of the core and surfaces of materials with variations in the slope of the primary stage thermal resistivity and a time relationship of less than 10% within a sample are considered to be homogeneous. Generally, products with natural skins or with density deviations normally found with such products may be considered acceptable for test by this technique.
信息：ICS：91.100.60 CCS：Q25 发布：1999-10-15 实施：1999-10-15

NF P18-653-2-1998 集料热性能和老化性能试验.第2部分:硫酸镁试验
简介：
信息：ICS：91.100.15 CCS：Q13 发布：1998-10-01 实施：1998-10-05

NF P18-653-4-1998 集料的热性能和老化性能试验.第4部分:干缩率测定
简介：
信息：ICS：91.100.15 CCS：Q13 发布：1998-10-01 实施：1998-10-05

JB/T 8631-1997 绕管法评定柔软片材热老化性能试验方法
简介： 本标准适用于评定电气绝缘用柔软片材的热老化性能。
信息：ICS：29.120 CCS：K10 发布：1997-09-05 实施：1998-01-01

JIS K7212-1995 用炉热法对热塑性塑料薄板热老化性能测试的一般规则
简介：
信息：ICS：83.080.20 CCS：G31 发布：1995-05-01 实施：1995-05-01

BS 2782-1 Method 131B-1983 塑料试验方法.热性能.挠性聚氯乙烯板材加热老化延伸性测定
简介：Form and number of test specimens, procedure and report. Applies the extensibility test of Method 150C.
信息：ICS：83.080.20 CCS：G31 发布：1983-02-28 实施：1983-02-28

北检院部分仪器展示